Originally Posted by wja96
IF (and I accept it's a big if) the rear 120mm fan lines up with the cpu socket then you may be able to use the Thermalright HR-01 and the 120mm fan duct. This basically turns the rear case fan into the CPU cooler fan using a very large passive 6-heatpipe heatsink.
http://www.thermalright.com/a_page/m...t_hr01_775.htm
There's an idea.....the TX1050 [ http://www.antec.com/us/productDetai...?ProdID=61050] has a 92mm duct right over where most CPUs sit [see http://www.antec.com/pdf/drawings/TX...G_Drawing.pdf] on the case side but I am concerned that the height of that heatsink might force me to remove the duct tunnel and thereby the mount for a 92mm fan. I do have an amazingly quiet 92mm in the duct at the moment. I also have an extremely quiet (having replaced the original) 120mm exhaust on the back.....I think that heatsink may be too high to retain the 92mm duct.
Asus P5W DH Deluxe : Intel E6600 Conroe : Noctua NH-U12F : DDR2 2 x 1024MB dual channel : Asus EN7600GSTOP512 : Iiyama PLE2200WS-B : RME HDSP9632[a proper musician's card] : 2 x SATA 7200rpm 250GB : 1 x 7200rpm IDE 120GB : 1 x 7200rpm IDE 80GB : Pioneer DVR110 : Antec TX1050 case c/w Smartpower 500PSU : MOTU MTPAV MIDI interface/time clock : SONAR 7PE : Reason3 : ReFX Nexus : ReFX Vanguard : NI Battery3 : JP-8080 : D-50 : D-10
Last edited by Gibbo; 20-02-2007 at 12:53 PM..
|