Originally Posted by robucf4 
Bios:
AI Overclocking - MANUAL
CPU RATIO CONTROL – AUTO
FSB Frequency – 333
PCI-E Frequency – 100
DRAM Frequency – 800
DRAM Timing Control – 4-4-4-12
TWR = AUTO
TRFC = AUTO
TWTR = AUTO
TRRD = AUTO
TRTP = AUTO
DRAM Static Read Control = AUTO
Transaction Booster = DISABLED
Clock Over-Charging Mode = AUTO
CPU Spread Spectrum = DISABLED
PCIE Spread Spectrum = DISABLED
CPU VOLTAGE = AUTO
CPU Voltage Reference = AUTO
CPU Voltage Damper = ENABLED (Does not work on Vanilla board)
DRAM Voltage = 2.1V
FSB Termination Voltage = AUTO
North Bridge Voltage =AUTO
North Bridge Voltage Reference = AUTO
South Bridge Voltage = AUTO
CPU Ratio Control – AUTO
C1E Support – Disable
Max CPUID Limit – Disable
Vanderpool Technology – Disable
CPU TM Function – Disable
Execute Disable Bit – disable
Intel ® SpeedStep (TM) Tech – Disable
PC:
E6600 | ASUS P5K | Freezer 7 Pro | EVGA 8800 GTS 320M | 2GB Corsair C4 | WD Raptor 150GB | Antec 900 case | OCZ 700W | Lite-On 20X
I followed you guide pretty much word for word, so all the settings you mentioned I have doubled checked and have set.
You havent mentioned what model/speed the RAM is, but the thing that stands out from your settings, and it is something that is mentioned a few times in the guide, and that is to keep your RAM at 1:1.
You have the RAM set at 800Mhz, and if you are following the guide, it should be set to 667 if the FSB is 333.