Found some time this morning and tested this and yes, you are right, this ventrilo seems to run on the thecus without further changes.
I downloaded it, tar -xfz in the directory ventrilo and found a new directory ventsrv then.
cd ventsrv and ./ventrilo_srv started the server with some output. I show details here:
Code:
root@127.0.0.1:/raid/data/pit/ventrilo# tar -xzf ventrilo_srv-3.0.2-Linux-i386.tar.gz
root@127.0.0.1:/raid/data/pit/ventrilo# ls
ventrilo_srv-3.0.2-Linux-i386.tar.gz ventsrv/
root@127.0.0.1:/raid/data/pit/ventrilo# cd ventsrv
root@127.0.0.1:/raid/data/pit/ventrilo/ventsrv# ls
LICENSE ventrilo_srv* ventrilo_srv.htm ventrilo_srv.ini ventrilo_status*
root@127.0.0.1:/raid/data/pit/ventrilo/ventsrv# ./ventrilo_srv
Ventrilo Server - Public - Version 3.0.2
(c)Copyright 1999-2007 Flagship Industries, Inc.
Version = 3.0.2
Name = Server 1
Phonetic = Server 1
Auth = 0
Duplicates = 1
SendBuffer = 131072
RecvBuffer = 131072
LogonTimeout = 5
CloseStd = 1
TimeStamp = 0
PingRate = 10
ExtraBuffer = 131072
ChanWidth = 0
ChanDepth = 8
ChanClients = 0
DisableQuit = 0
VoiceCodec = 0 (GSM 6.10)
VoiceFormat = 1 (11 KHz, 16 bit) - Bytes/Sec 2210
SilentLobby = 0
AutoKick = 0
MaxClients = 8
READY:
----------
END: Shutting down the server.
END: Shutdown complete. Uptime was 0 00:11:18.
The end of the server in the last two lines was “STRG+C”.
When I inspected the running processes with ps, I found ventrilo active:
Code:
root@127.0.0.1:~# ps | grep ventr
30795 root 704 S ./ventrilo_srv
There was no problem or error mentioned.
When I run nmap, I found:
Code:
[root@syo]~ # nmap 192.168.0.100
Starting Nmap 4.62 ( http://nmap.org ) at 2008-08-06 10:29 CEST
Interesting ports on 192.168.0.100:
Not shown: 1705 closed ports
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
80/tcp open http
111/tcp open rpcbind
443/tcp open https
548/tcp open afp
631/tcp open ipp
850/tcp open unknown
2000/tcp open callbook
2049/tcp open nfs
MAC Address: 00:14:FD:11:30:AA (Thecus Technology)
Nmap done: 1 IP address (1 host up) scanned in 568.886 seconds
So, there seems to be no further port open for the ventrilo.
I don't know enough about that stuff and my time is over now, but /etc/services at least shows not a lot of free open ports for the NAS. Somehow, you probably have to give the ventrilo server a chance to open one port and listen to incoming calls on it.
Bye.