there should also be headers for the mic and headphones, they have header for the audio out and headser for audio in, so that the audio goes back into the board and to your audio out ports at the back, you will probably have to take some jumpers off the connectors before sticking the leads on. I assume your board has the connectors, my MSI nforce2 board did, but the Abit isn't as good a board so i'm not sure 
Desktop: AMD Athlon XP 2500+ Barton, 1024Mb PC-3200 TwinMOS w/Winbond, MSI K7N2 Delta-ILSR, Radeon 9800SE AIW, 40 GB 7,200 Rpm Hitachi Deskstar, 120GB 7,200 Rpm 8mb Cache Maxtor Diamond 9, 160GB 7200 Rpm 8mb Cache Seagate 7200.7 SATA, Plextor 708A 8x DVD-RW, 550W PFC Q-tec PSU, Casetek 1019SM Silver Case, Camdridge Soundworks DTT2200 Speakers
Laptop: Clevo D470W - 17" Widescreen TFT, Intel Pentium4 3.06Ghz 533FSB, 1024Mb PC-2700 Hynix, Radeon Mobility 9000 64Mb, Fujitsu 80Gb 4,200rpm, 250Gb 7,2000rpm 8mb Cache Maxtor OneTouch, Toshiba SD-R6372 DVD-RW +/- x4, Built-in Four speakers, webcam and microphone |