Results 1 to 5 of 5

Thread: error at boot. amd data change update new data to DMI!

  1. #1
    Registered+
    Join Date
    May 2009
    Posts
    33
    Thanks
    0
    Thanked
    1 time in 1 post
    • Will Smith's system
      • Motherboard:
      • GByte GA-MA785GMT-UD2H
      • CPU:
      • AMD phenom II x2 555 Black Edition 3.20ghz
      • Memory:
      • 8gb DDR3 1333mhz
      • Storage:
      • 1tb Samsung Spinpoint F3
      • Graphics card(s):
      • MSI 1gb HD5850 twin frozr
      • PSU:
      • CoolerMaster RealPower 520w Modular
      • Case:
      • CoolerMaster Elite 335
      • Operating System:
      • Windows 7
      • Monitor(s):
      • Samsung 2032mw
      • Internet:
      • Virgin Media 10mb

    error at boot. amd data change update new data to DMI!

    Hello I have just finished building my new computer

    specs are: AMD phenom x2 555
    gigabyte GByte GA-MA785GMT-UD2H
    4gb ddr3 kingston valueram 1333mhz
    500gb samsung f3

    I havent even got around to loading windows onto it yet. It posts fine, gets to verifying dmi pool and then i get hit with AMD DATA change.... Update new data to DMI!

    Strange thing is its only just happened, had it POST several times before this and it was super. Tried clearing the CMOS, loading optimised defaults but still nothing. any ideas?

  2. #2
    Member
    Join Date
    Aug 2009
    Posts
    158
    Thanks
    3
    Thanked
    21 times in 20 posts
    • barry2811's system
      • Motherboard:
      • Gigabyte GA-Z87-HD3
      • CPU:
      • Intel i5 4670K (cooled by Noctua NH-D14)
      • Memory:
      • 2 x 4GB Corsair XMS3 Classic DDR3 1333MHz
      • Storage:
      • Samsung Pro 128GB Boot Drive, 2 x 1TB Samsung SpinPoint F1 + 2TB Samsung F4EG, 1 x 3TB Seagate Barac
      • Graphics card(s):
      • Sapphire ATI Radeon HD6870
      • PSU:
      • Corsair HX450
      • Case:
      • CM Storm Enforcer
      • Operating System:
      • Windows 8.1 Professional
      • Monitor(s):
      • Viewsonic VG2439M-LED
      • Internet:
      • Sky Fibre

    Re: error at boot. amd data change update new data to DMI!

    Quote Originally Posted by Will Smith View Post
    Hello I have just finished building my new computer

    specs are: AMD phenom x2 555
    gigabyte GByte GA-MA785GMT-UD2H
    4gb ddr3 kingston valueram 1333mhz
    500gb samsung f3

    I havent even got around to loading windows onto it yet. It posts fine, gets to verifying dmi pool and then i get hit with AMD DATA change.... Update new data to DMI!

    Strange thing is its only just happened, had it POST several times before this and it was super. Tried clearing the CMOS, loading optimised defaults but still nothing. any ideas?
    Think you just need to be patient. If the BIOS detects changes in SATA devices it updates it's data - doesn't take too long.

  3. #3
    Member
    Join Date
    Jun 2009
    Location
    Durham
    Posts
    174
    Thanks
    2
    Thanked
    18 times in 16 posts
    • Bitemarks666's system
      • Motherboard:
      • DFI Lanparty DK 790GX-M2RS
      • CPU:
      • AMD Phenom II X3 720BE @ 3.8GHz 4 Cores
      • Memory:
      • 4X2GB G.Skill DDR2-1066 PK (F2-8500CL5D-4GBPK)
      • Storage:
      • 2x320GB 7200.12in RAID 0 + Samsung F1 500GB
      • Graphics card(s):
      • XFX 5850 XXX @ 1050/1250
      • PSU:
      • Corsair HX-520
      • Case:
      • Coolermaster Comsos 1000
      • Operating System:
      • Windows 7 HP 64 Bit
      • Monitor(s):
      • Samsung T240 1920X1200
      • Internet:
      • O2 14Mbps down/ 1Mbps up

    Re: error at boot. amd data change update new data to DMI!

    have you flashed to the latest BIOS? Daft Q does your current BIOS support the 555?

  4. #4
    Registered+
    Join Date
    Jun 2007
    Posts
    41
    Thanks
    4
    Thanked
    1 time in 1 post

    Re: error at boot. amd data change update new data to DMI!

    I have a very similar setup to yours Will Smith and also have that message appear. Then again, I also have ram problems at the moment..

  5. #5
    Registered+
    Join Date
    Jun 2007
    Posts
    41
    Thanks
    4
    Thanked
    1 time in 1 post

    Re: error at boot. amd data change update new data to DMI!

    Been looking through the gigabyte forum...It appears that if everything loads ok, then the message is only an annoyance..

    Hi All

    I confirmed it with our HQ, there is nothing to worry about. The explanation is as follows:
    The message means that data of the memory registry of K8 processor has been updated to DMI when the system is turned on. Those data are aimed to be written back to processor when PC wakes up from sleep mode of S3(STR).

    Anyway a special bios will be made soon without this message (as it maybe confusing)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Abit AN78 data change stuck!!
    By blade1 in forum abit.care@HEXUS
    Replies: 1
    Last Post: 04-12-2009, 12:57 AM
  2. News - AMD exec says NVIDIA neglecting gamers
    By HEXUS in forum HEXUS News
    Replies: 285
    Last Post: 10-11-2009, 08:01 AM
  3. AMD Data change...Update new data to DMI
    By kopite in forum SCAN.care@HEXUS
    Replies: 5
    Last Post: 21-10-2008, 08:18 PM
  4. PSU Calculator
    By Hullz-Modz in forum PC Hardware and Components
    Replies: 146
    Last Post: 10-04-2008, 07:07 PM
  5. AMD mobile cpu - windows update help
    By doctor_prox in forum PC Hardware and Components
    Replies: 0
    Last Post: 12-05-2004, 12:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •