Results 1 to 6 of 6

Thread: URGENT: COM1 Port - Console Management - Issues

  1. #1
    Senior Member mikeo01's Avatar
    Join Date
    Oct 2011
    Location
    Wales!
    Posts
    1,402
    Thanks
    294
    Thanked
    98 times in 88 posts
    • mikeo01's system
      • Motherboard:
      • MSI B85i Gaming
      • CPU:
      • Intel Xeon 1230V3
      • Memory:
      • G.Skill RipJaws 2133MHZ
      • Storage:
      • Plextor M5S 128GB
      • Graphics card(s):
      • VTX3D R9 290
      • PSU:
      • Coolermaster VS450
      • Case:
      • Corsair 250D
      • Operating System:
      • Windows 8 PRO, Ubuntu
      • Monitor(s):
      • LG 22" W2261VP

    URGENT: COM1 Port - Console Management - Issues

    Hello all,

    Kind of a funny question really. I don't think I am losing my marbles but I'll go ahead away.

    Received two management switches both seem to be unresponsive via a serial link. Using Tera Term for this.

    What I've tried:
    Physical and logical loopback on the serial port (local echo and loopback via the physical pins (it's a IDC10 to serial DB9 bracket))
    Changing Baud rate, default for this switch is 19200, also tried lowering the receive and transmit buffer
    Tried both a straight-through and NULL modem cable
    Tried every terminal IDs as it wasn't listed in the documentation, however my other switch is VT100 which Tera Term supports
    Attempted Telnet using the default IP settings on both switches... to no avail, which is extremely odd, should at least connect

    Where I bought it from (eBay) have very high reputation and they have listed these as used however fully tested and working. They apparently have been reset however I cannot even Telnet in using the default settings.

    So, my only suspicion is that I have in fact received another straight-through DB9 serial cable which won't work. Both devices (serial port -> switch) are DTEs for communication.

    Both switches use standard RS232 DB9 serial cable.


    Just odd I can't even Telnet in considering these switches are supposed to be reset (default IP settings are provided within the manual).


    Any suggestions?
    Last edited by mikeo01; 17-04-2014 at 02:00 PM.
    "If at first you don't succeed; call it version 1.0" ||| "I'm not interrupting you, I'm putting our conversation in full-duplex mode" ||| "The problem with UDP joke: I don't get half of them"
    "I’d tell you the one about the CIDR block, but you’re too classy" ||| "There’s no place like 127.0.0.1" ||| "I made an NTP joke once. The timing was perfect."
    "In high society, TCP is more welcome than UDP. At least it knows a proper handshake."

  2. #2
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,978
    Thanks
    778
    Thanked
    1,586 times in 1,341 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 5900X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 2TB Linux, 2TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 39 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 900Mb/900Mb (CityFibre FttP)

    Re: URGENT: COM1 Port - Console Management - Issues

    I suggest that if you use serial ports you need some sort of LED box. Ideally a break out box so that you can turn it into whatever sort of cable you need. Honestly, I have known people waste days on this stuff and one glance at which LEDs are lit tells you exactly what is going on.

    http://www.ebay.co.uk/bhp/rs232-tester

    A null modem is not the same as a crossover cable, suppliers get them confused, it is a minefield.

  3. Received thanks from:

    mikeo01 (09-04-2014)

  4. #3
    Senior Member mikeo01's Avatar
    Join Date
    Oct 2011
    Location
    Wales!
    Posts
    1,402
    Thanks
    294
    Thanked
    98 times in 88 posts
    • mikeo01's system
      • Motherboard:
      • MSI B85i Gaming
      • CPU:
      • Intel Xeon 1230V3
      • Memory:
      • G.Skill RipJaws 2133MHZ
      • Storage:
      • Plextor M5S 128GB
      • Graphics card(s):
      • VTX3D R9 290
      • PSU:
      • Coolermaster VS450
      • Case:
      • Corsair 250D
      • Operating System:
      • Windows 8 PRO, Ubuntu
      • Monitor(s):
      • LG 22" W2261VP

    Re: URGENT: COM1 Port - Console Management - Issues

    You know what I mean, internal wiring is crossed over I have ordered a new cable now in case the seller didn't really know which was a straight-through and what was a NULL cable.

    I'll have a check that LED box will come in handy thanks!

    That's only problem with the bay, sellers selling things that may or may not match the standards of things
    "If at first you don't succeed; call it version 1.0" ||| "I'm not interrupting you, I'm putting our conversation in full-duplex mode" ||| "The problem with UDP joke: I don't get half of them"
    "I’d tell you the one about the CIDR block, but you’re too classy" ||| "There’s no place like 127.0.0.1" ||| "I made an NTP joke once. The timing was perfect."
    "In high society, TCP is more welcome than UDP. At least it knows a proper handshake."

  5. #4
    Senior Member mikeo01's Avatar
    Join Date
    Oct 2011
    Location
    Wales!
    Posts
    1,402
    Thanks
    294
    Thanked
    98 times in 88 posts
    • mikeo01's system
      • Motherboard:
      • MSI B85i Gaming
      • CPU:
      • Intel Xeon 1230V3
      • Memory:
      • G.Skill RipJaws 2133MHZ
      • Storage:
      • Plextor M5S 128GB
      • Graphics card(s):
      • VTX3D R9 290
      • PSU:
      • Coolermaster VS450
      • Case:
      • Corsair 250D
      • Operating System:
      • Windows 8 PRO, Ubuntu
      • Monitor(s):
      • LG 22" W2261VP

    Re: URGENT: COM1 Port - Console Management - Issues

    Well what do you know, it was the cable after all

    That's eBay sellers for you.
    "If at first you don't succeed; call it version 1.0" ||| "I'm not interrupting you, I'm putting our conversation in full-duplex mode" ||| "The problem with UDP joke: I don't get half of them"
    "I’d tell you the one about the CIDR block, but you’re too classy" ||| "There’s no place like 127.0.0.1" ||| "I made an NTP joke once. The timing was perfect."
    "In high society, TCP is more welcome than UDP. At least it knows a proper handshake."

  6. #5
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,978
    Thanks
    778
    Thanked
    1,586 times in 1,341 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 5900X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 2TB Linux, 2TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 39 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 900Mb/900Mb (CityFibre FttP)

    Re: URGENT: COM1 Port - Console Management - Issues

    Can't say I am surprised.

    I think I bought my LED box from Maplins but that was probably 10 years ago. Not sure where you could buy one these days.

  7. #6
    Senior Member mikeo01's Avatar
    Join Date
    Oct 2011
    Location
    Wales!
    Posts
    1,402
    Thanks
    294
    Thanked
    98 times in 88 posts
    • mikeo01's system
      • Motherboard:
      • MSI B85i Gaming
      • CPU:
      • Intel Xeon 1230V3
      • Memory:
      • G.Skill RipJaws 2133MHZ
      • Storage:
      • Plextor M5S 128GB
      • Graphics card(s):
      • VTX3D R9 290
      • PSU:
      • Coolermaster VS450
      • Case:
      • Corsair 250D
      • Operating System:
      • Windows 8 PRO, Ubuntu
      • Monitor(s):
      • LG 22" W2261VP

    Re: URGENT: COM1 Port - Console Management - Issues

    Quote Originally Posted by DanceswithUnix View Post
    Can't say I am surprised.

    I think I bought my LED box from Maplins but that was probably 10 years ago. Not sure where you could buy one these days.
    I contacted the seller and she asked me "What resolution are you running at" and blatantly ignored what I was talking about.

    Just pot luck buying cables on eBay, some know the technicalities of it and some don't unfortunately. Up to the suppliers there
    "If at first you don't succeed; call it version 1.0" ||| "I'm not interrupting you, I'm putting our conversation in full-duplex mode" ||| "The problem with UDP joke: I don't get half of them"
    "I’d tell you the one about the CIDR block, but you’re too classy" ||| "There’s no place like 127.0.0.1" ||| "I made an NTP joke once. The timing was perfect."
    "In high society, TCP is more welcome than UDP. At least it knows a proper handshake."

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •