You and my brother would get along very well. He is a machinist who did a ground based liquid pipe. Which is amazingly awesome. He would be all over forming plastic or Plexiglas like that. I on the other hand would have to pay some one I think.
Very cool stuff though!
L33TON (26-04-2014)
Oh I won't lie to you I did pay somebody to get them cut but I had to make the measurements which took me a couple of hours and the whole thing for like a glove afterwords
Nice first build! Whenever I see these it always makes me want to go back to water, I start pricing everything up then I step away again
www.leonslost.com
Steam: Korath .::. Battle.net: Korath#2209 .::. PSN: Korathis .::. Origin: Koraths
Motivate me on FitBit .::. Endomondo .::. Strava
L33TON (26-04-2014)
First Liquid Cooled computer, looks freggin badass
L33TON (20-05-2014)
I don't know if it's just the blurring of the noctua fans, but it looks like you've got a solid matt of dust between them and the rad.
One general tip I've seen for water cooling if you're using a single set of fans is have them in pull not push.
Has no real effect of the air flow/heat as the fans should be flush against the rad.
The main reason for having them in push is it makes cleaning out dust a whole lot easier as you don't have to remove the fans as any dust/fluff build up is on the other side of the rad.
Also on your build to keep the air flow in the same direction you'd have to put the fans behind the rad and thus hide them
I don't think the Noctua colour scheme is that bad, but it never matches with anything else, so almost always clashes.
[rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/Spork/project_spork.jpg[rem /IMG] [rem IMG]https://i69.photobucket.com/albums/i45/pob_aka_robg/dichotomy/dichotomy_footer_zps1c040519.jpg[rem /IMG]
Pob's new mod, Soviet Pob Propaganda style Laptop.
"Are you suggesting that I can't punch an entire dimension into submission?" - Flying squirrel - The Red Panda Adventures
Sorry photobucket links broken
Thanks for the comment buddy. I gathered this information from a video from Linus and that's why I kept the top radiator fans in pull. Too bad it's not the case with the bottom radiator as it's an 80mm thick radiator and it's got another set of Noctuas pulling from the back. You've got hawk eyes, I'll give you that. There is a bit of dust build up but that's going to come out for my next mod.
Have a look here
http://noctua.at/main.php?show=produ...s_id=78&lng=en
Also, click here for a walkthrough of my rig
http://www.youtube.com/watch?v=4wtAz4aLpdM
There are currently 1 users browsing this thread. (0 members and 1 guests)