Problem about N5200BR Pro with HD103UJ

[Yohei]

Hello,

I would like to ask if "Samsung HD103UJ(1000GB/7200rpm/32M)" works on N5200BR Pro.

I did try to construct raid6 using 5 x HD103UJ, but it was not completed.
No.1, No.3, No.4 are used for constructed raid, but No.2 and No.5 were throw away while
constructing the raid. I checked the status of these disks. No.2 and No.3 were warning and
otheres were O.K.
# No.2 : Current Pending Sector : 6 , No.3 : Current Pending Sector : 1
I am wondering why No.5 disk was throw away and also
disks which are warning status can not use for the raid.

I've also tried to these disks by using SSH module and smartctl(ver 5.33) but i got followsing
error messages.
# I also confirmed that above s.m.a.r.t info is right by connecting these disk to other machine.
-------------------------------------------------------------------------------------------------
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is smartmontools Home Page (last updated $Date: 2008/03/23 14:11:53 $)

Device: r i Version: -
Device type: <22>
Local Time is: Fri Mar 28 12:43:57 2008 JST
Device does not support SMART

Error Counter logging not supported

------------------------------------------------------------------------------------------------

I checked similar thread that is about backpanel, but this is another problem i guess.
Let me know what is going on.

Yohei.

[enzo86]

I have been showing the same type of errors on my disk, I think the you are missing part of the syntax:

Anyone else have problems with this drive:
=== START OF INFORMATION SECTION ===
Device Model: WDC WD7500AACS-00ZJB0
Serial Number: WD-WCASM0011601
Firmware Version: 01.01B01
User Capacity: 750,156,374,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Mar 27 23:04:06 2008 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled




-a (little a) will give you all info:


-A will give you just disk stats:



/usr/sbin/smartctl -A -d marvell /dev/sda
smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is [smartmontools.sourceforge.net/]smartmontools Home Page (last updated $Date: 2008/03/23 14:11:53 $)[/url]

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 253 221 021 Pre-fail Always - 958
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 39
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 100 253 051 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 53
10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 10
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 896
194 Temperature_Celsius 0x0022 114 110 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0


--Jason

[Yohei]

Thanx enzo86. It works with options which you wrote.
I also exchanged two wrong disks for new disks, and now raid is healthy.