Problem with installing moduls on N5200

[mulderk]

I have problems to install any of the modules to the N5200.

I open the web-configuration and go to SYSTEM MODULE MGNT.
I klick on "Durchsuchen" (search) an point to the *mod-file i like to install (I have tried some).
I klik OK an the file-path apeares in the browser-field ("R:....INFO.mod").
I klick on INSTALL.
I klick in OK at the question "Do you want to install module?"
And then I get this message every time:


Your URL is not define, please check it!


I have installed firmware version V2.00.04.5.
My N5200 is set up to run as a RAID5 with SMB with 3x750 GB Harddisks.

WAN is set fixed to:
192.168.2.152 (ip)
255.255.255.0 (netmask)
192.168.2.2 (gateway)
192.168.2.2 (dns server - tried to let this blank as well)
used with Gigabit network.

LAN settings:
192.168.1.254 (ip)
255.255.255.0 (netmask)
No cable here.

I hope there is somebody who can help...

[peterfu]

As far as I remember the "..URL is not define.." was a problem in FW 2.00.03 and then solved in FW 2.00.04.
FW 2.00.04.5 I don't even now, cause the last released one is 2.00.04. Are You sure about Your FW version ?
br
Peter

[mulderk]

Yes - definitifly:

Status / About shows this:

Manufacturer Thecus
Product No. N5200
Firmware Version 2.00.04.5
Up Time 19 hours 57 minutes

Should I load an other firmware-release?

[Funkstar]

Odd, didn't know there was a 2.00.04.5. 2.00.07 has been mensioned on the user forums a couple of times so that can't be long in coming.

Sorry I don't really have any suggestions for your problem though.

[peterfu]

This FW version (2.00.04.5) must be one of the beta versions of FW 2.00.04 - interesting would be from where You have it. As far as I know there is no easy possibility to downgrade to 2.00.04.
@MulderK: Could You activate in Your profile the possibility to send You PM's ?
br
Peter

[Funkstar]

He needs a few more posts to be able to use PMs.

I think it is 5 in total, but I can't be sure.

[peterfu]

Ahh, again the 5 post border as it is for posting links

[Funkstar]

Sorry, actually it's 15

Welcome to HEXUS!

[mulderk]

It could have th following reason:
There was an older firmware on the divice and I updated it to 2.00.04. I found the firmare-file on my PC.

Then I found in some forum that there is a new version of the media server in a standalone firmware file.
After this Installation the firmware-Version is shown as 2.00.04.5
But no possibility th install modules anyway.

I contacted Thecus via support-mail. Lets see...
Tomorrow I try to downgrade, perhaps this will function.

[mulderk]

I got an email from the Thecus Support.
There is a new firmware 2.00.05.1 upgrade.
I tryed it and everything works fine now.