Originally Posted by
jimborae
Update my overall conclusion is that this board is rubbish. Hope a new bios will sort things out.
Problems so far:
1. USB keyboard does not function when fsb is raised.
2. Sometimes will not restart after saving bios changes, requires two or three pushes of the power button.
3. If you push the fsb too far the board finds it difficult to recover if it wont boot. Usually requires a cmos reset and even then sometimes more than one reset.
4. Overclocking very hit and miss atm. Sometimes is will boot and be prime stable but if you reboot again it may not even make it in to windows.
5. According to the bios my C2D 6300 & 4600 have unlocked multipliers. err no they don't and any attempt to change them either up or down results in no boot. Some times when recovering from an overclocking lockup the default multiplier in the current settings section is reported as 26
6: The pci slots dont work !!