Page 8 of 15 FirstFirst ... 567891011 ... LastLast
Results 113 to 128 of 233

Thread: BIOS updates for Intel E0 stepping

  1. #113
    Registered User
    Join Date
    Apr 2009
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    This is one of my first boards from ABIT, I used to like ASUS and Gigabyte, It is an ix38 pro, bought 2 of them and running a 5200 at 3.5Ghz on v13 bios without smallest issues. soon I want to go to Q series 45nm of intel chips, but I just do not want to get rid of my almost new abit boards - what rev of bios and type of CPU would you suggest to go with, without any headaches of incompatibility. Thank you for the input.

    Mike

  2. #114
    Registered+
    Join Date
    Aug 2007
    Posts
    28
    Thanks
    0
    Thanked
    1 time in 1 post

    Re: BIOS updates for Intel E0 stepping

    Quote Originally Posted by bill875 View Post
    Swanny, I've now done two builds with the Gigabyte EP45-UD3P and my only concern with it is that there is an alarm that sounds for about 3 seconds when Windows wakes from S3 Sleep mode. I believe that's happening because the CPU Fan does not start spinning the moment it comes out of S3 sleep mode. As soon as the fan spins up, the alarm stops. I am tempted to turn off the CPU Fan Fail alarm, but if it really does fail, I want to be made aware of it. Hopefully a BIOS update will address this issue.
    Getting the same problem when putting the system to sleep. Hoping on a BIOS fix.

  3. #115
    Registered User
    Join Date
    Aug 2009
    Posts
    7
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Will this work for a Q6600 with G0 stepping? I think it will but thought I'd ask before pulling the trigger so to speak. I understand that this E0 stepping update is to support E0 chips as well, so should be fine on the existing G0 stepping ?

    Cheers

    Alex

    NB: I've read the whole thread and no-one else has mentioned this.

  4. #116
    gdw
    gdw is offline
    Registered User
    Join Date
    Aug 2009
    Location
    South Texas
    Posts
    8
    Thanks
    0
    Thanked
    0 times in 0 posts
    • gdw's system
      • Motherboard:
      • Abit IP35pro
      • CPU:
      • E6750@3.408/xigmatek 963hsf
      • Memory:
      • 4g G Skill
      • Storage:
      • WD 80 sata
      • Graphics card(s):
      • Diamond(ati) 3850 (256)
      • PSU:
      • Ultra 600
      • Case:
      • antec P180
      • Operating System:
      • xp pro
      • Monitor(s):
      • 22" samsung
      • Internet:
      • verizon wireless broadband

    Re: BIOS updates for Intel E0 stepping

    Sorry if I'm buttin in, but what is the best "proven" bios update to use with an E6750 on IP 35PRO. I'm currently using 14, and was wondering if there is a better one for clocking up my system a little bit.
    Thanks, Gary

  5. #117
    Resident abit mourner BUFF's Avatar
    Join Date
    Jul 2003
    Location
    Sunny Glasgow
    Posts
    8,067
    Thanks
    7
    Thanked
    181 times in 171 posts

    Re: BIOS updates for Intel E0 stepping

    bumped to the front page again.

    MSI P55-GD80, i5 750
    abit A-S78H, Phenom 9750,

    My HEXUS.trust abit forums

  6. #118
    Registered User
    Join Date
    Sep 2009
    Posts
    5
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Hi folks,

    Is there a BIOS update to support E0 and the AB9 QuadGT line of motherboards out yet?

  7. #119
    Registered+
    Join Date
    Jun 2009
    Location
    Bavaria
    Posts
    23
    Thanks
    0
    Thanked
    1 time in 1 post
    • barnabas's system
      • Motherboard:
      • AW9D-MAX & IP35
      • CPU:
      • E7300 / E3110
      • Operating System:
      • WIN7 Home Premium x64/Ultimate x64

    Re: BIOS updates for Intel E0 stepping

    Quote Originally Posted by Burn View Post
    Hi folks,

    Is there a BIOS update to support E0 and the AB9 QuadGT line of motherboards out yet?
    N° 17

    should be working with E0 step

    have a look @post N° 1204 AB9 QuadGT

  8. #120
    Registered User
    Join Date
    Sep 2009
    Posts
    5
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Awesome, thanks!

    For someone who doesn't have a floppy drive, is it advisable to flash via USB? Or through Windows?

  9. #121
    Registered User
    Join Date
    Sep 2009
    Posts
    5
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Ended up following a guide to flash via USB stick, worked great. Thanks so much guys!

  10. #122
    Registered User
    Join Date
    Sep 2009
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Quote Originally Posted by razrx View Post
    I pulled the trigger and flashed to the m629b_18.bin bios image and it fixed my cpu temp readout
    I did the exact same thing for my QX9750 last week and it too solved my super high cpu temp readout problem!

  11. #123
    Registered User
    Join Date
    Sep 2009
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Thanks so much for these bios!!!! I just got a e8400 and it wouldn't boot windows and was getting temp warnings...this fix it easy and pie!

  12. #124
    Registered+
    Join Date
    Mar 2009
    Location
    Belgrade
    Posts
    23
    Thanks
    0
    Thanked
    0 times in 0 posts
    • IgorHW's system
      • Motherboard:
      • Asus P8P67
      • CPU:
      • i5 2400
      • Memory:
      • 4GB DDR3
      • Storage:
      • Mushkin 60GB SSD -/- 2xWD 1TB -/- WD 200GB
      • Graphics card(s):
      • Sapphire HD5670 (Silent)
      • PSU:
      • Chieftec 550W (Custom Fanless :>)
      • Case:
      • Antec P182
      • Operating System:
      • w2k8r2

    Re: BIOS updates for Intel E0 stepping

    Does anyone have any experience with IP35Pro and new E6300 R0 2.8GHz, is it supported with bios v18? Will it work?

  13. #125
    Registered User
    Join Date
    Sep 2009
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Will there be an E0 support for the Fatality F-I90HD? I have 5 of them and I don't want them to go to waste...

  14. #126
    Registered User
    Join Date
    Oct 2009
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Quote Originally Posted by IgorHW View Post
    Does anyone have any experience with IP35Pro and new E6300 R0 2.8GHz, is it supported with bios v18? Will it work?
    With this Bios the E6300 R0 2.8GHz works great with my Abit I-G31

  15. #127
    Registered User
    Join Date
    Oct 2009
    Posts
    2
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Hmm, can't post with q9550 and ip35-e on bios 18, but with this new beta one it posts fine and shows the right temperature. However, it seems that adjustment of vcore is now impossible?

    PS
    I booted fine on Bios16, only it limited the multi to 8. Can't remember if I could adjust voltages..

    Regards,
    Lars M

  16. #128
    Registered User
    Join Date
    Nov 2009
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: BIOS updates for Intel E0 stepping

    Hello guys.

    This is my first post on this forum, so don't go hard on me.

    Today I changed my E5200 M0 for an E8400 E0. Works fine, but iI discovered that there are some submenus missing from my BIOS, like the EIST option and the CPU Multiplier. I have the IP35 board, with BIOS 18, works fine @ 400x9, 1.25V CPU VID, but when I crank it up to FSB450 it freezes in Prime95 instantly, even with 1.35V.
    I read there is a 18 Beta BIOS for this board but I'm having some difficulties finding it. Is there any improvement using this Beta version of BIOS?

    10x. Cheers!

    Alex.

    L.E. Oh, and my board reports 42-43 degrees on cores and 98 on CPU. In LinX it gets to 60 degrees, but it won't go lower then 42. It freezes at 42, but the heatpipes are cold.
    Last edited by Flawlessul; 06-11-2009 at 10:18 PM.

Page 8 of 15 FirstFirst ... 567891011 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 72
    Last Post: 17-01-2014, 11:53 PM
  2. Replies: 1
    Last Post: 04-09-2007, 12:49 PM
  3. AB9 Pro BIOS 1.6 Problems
    By broadwater in forum abit.care@HEXUS
    Replies: 3
    Last Post: 09-01-2007, 07:58 PM
  4. SATA HD problem with Bios
    By Argy in forum Help! Quick Relief From Tech Headaches
    Replies: 4
    Last Post: 26-09-2005, 11:42 AM
  5. help! BIOS update has killed my abit mobo
    By PanzerKnight in forum PC Hardware and Components
    Replies: 9
    Last Post: 13-01-2005, 10:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •