Printable View
Hello, I have a problem and although I have a FP-IN9 and wants it with a Q9550 running but does not ... bios ID 16 CPU 90 °, 197F the thing beeps and crashes ... and with the e0 Stepping bios ID 18 bluesceens only in the Windows Vista intallation after about 5min. PLZ help me .. apologized for the poor English have tried the Google translator:)
As I said, 650i chipset doesn't support 45nm quadcore CPU's.
Look this ! Seens that 650i IN9 do have support to 45nm Quad´s !
http://www.abit.com.tw/cpu-support-l...fp-in9-sli.htm
I´m looking forward to test one 45nm Quad !
LGA 775 Motherboards
Model Name Fatal1ty FP-IN9 SLI
NB Chipset 650i SLI
Supports FSB 1333 / 1066 / 800 / 533MHz
Last Update: Jul. 2008
CPU List FSB MB Rev. BIOS Ver. Result
Core 2 Extreme QX9650 1333 All 16 OK
Core 2 Extreme QX6850 1333 All 16 OK
Core 2 Extreme QX6800 1066 All 16 OK
Core 2 Extreme QX6700 1066 All 16 OK
Core 2 Extreme X6800 1066 All 16 OK
Core 2 Quad Q9550 1333 All 16 OK
Core 2 Quad Q9450 1333 All 16 OK
Core 2 Quad Q9400 1333 All 一 Test
Core 2 Quad Q9300 1333 All 16 OK
Core 2 Quad Q8200 1333 All 一 Test
Core 2 Quad Q6700 1066 All 16 OK
Core 2 Quad Q6600 1066 All 16 OK
Core 2 Duo E8600(E0) 1333 All 一 Test
Core 2 Duo E8500(E0) 1333 All 一 Test
Core 2 Duo E8500(C0) 1333 All 16 OK
Core 2 Duo E8400(E0) 1333 All 一 Test
Core 2 Duo E8400(C0) 1333 All 16 OK
Core 2 Duo E8200 1333 All 16 OK
Core 2 Duo E7300 1066 All 16 OK
Core 2 Duo E7200 1066 All 16 OK
Core 2 Duo E6850 1333 All 16 OK
Core 2 Duo E6750 1333 All 16 OK
Core 2 Duo E6550 1333 All 16 OK
Core 2 Duo E6700 1066 All 16 OK
Core 2 Duo E6600 1066 All 16 OK
Core 2 Duo E6420 1066 All 16 OK
Core 2 Duo E6400 1066 All 16 OK
Core 2 Duo E6320 1066 All 16 OK
Core 2 Duo E6300 1066 All 16 OK
Core 2 Duo E5200 1066 All 一 Test
Core 2 Duo E4700 800 All 16 OK
Core 2 Duo E4600 800 All 16 OK
Core 2 Duo E4500 800 All 16 OK
Core 2 Duo E4400 800 All 16 OK
Core 2 Duo E4300 800 All 16 OK
Pentium Dual Core E2220 800 All 16 OK
Pentium Dual Core E2200 800 All 16 OK
Pentium Dual Core E2180 800 All 16 OK
Pentium Dual Core E2160 800 All 16 OK
Pentium Dual Core E2140 800 All 16 OK
Celeron 440 800 All 16 OK
Celeron 430 800 All 16 OK
Celeron 420 800 All 16 OK
Pentium EE 965 1066 All 16 OK
Pentium EE 955 1066 All 16 OK
Pentium EE 840 800 All 16 OK
Pentium D 960 800 All 16 OK
Pentium D 950 800 All 16 OK
Pentium D 945 800 All 16 OK
Pentium D 940 800 All 16 OK
Pentium D 930 800 All 16 OK
Pentium D 920 800 All 16 OK
Pentium D 840 800 All 16 OK
Pentium D 830 800 All 16 OK
Pentium D 820 800 All 16 OK
Pentium D 805 533 All 16 OK
Pentium 4 EE 3.73GHz 1066 All 16 OK
Pentium 4 661 800 All 16 OK
Pentium 4 651 800 All 16 OK
Pentium 4 641 800 All 16 OK
Pentium 4 631 800 All 16 OK
Pentium 4 672 800 All 16 OK
Pentium 4 670 800 All 16 OK
Pentium 4 662 800 All 16 OK
Pentium 4 660 800 All 16 OK
Pentium 4 650 800 All 16 OK
Pentium 4 640 800 All 16 OK
Pentium 4 630 800 All 16 OK
Pentium 4 571/ 570/J 800 All 16 OK
Pentium 4 561/ 560/J 800 All 16 OK
Pentium 4 551/ 550/J 800 All 16 OK
Pentium 4 541/ 540/J 800 All 16 OK
Pentium 4 531/ 530/J 800 All 16 OK
Pentium 4 521/ 520/J 800 All 16 OK
Pentium 4 519 533 All 16 OK
Pentium 4 506 533 All 16 OK
Pentium 4 505/J 533 All 16 OK
Celeron D 365 533 All 16 OK
Celeron D 356 533 All 16 OK
Celeron D 347 533 All 16 OK
Celeron D 351/350 533 All 16 OK
Celeron D 346/345/J 533 All 16 OK
Celeron D 341/340/J 533 All 16 OK
Celeron D 336/335/J 533 All 16 OK
Celeron D 331/330/J 533 All 16 OK
Celeron D 326/325/J 533 All 16 OK
Celeron D 320 533 All 16 OK
Celeron D 315 533 All 16 OK
*Intel CPU details:
http://processorfinder.intel.com/scripts/default.asp
http://www.intel.com/products/processor_number/info.htm
See ya !
Quote:
Originally Posted by svkap
Hi Guys, i got quite the same problem as above.
I bought a Q9550 cauz bios version 16 / especially version 18 should support c2q E0. Anyway, my system doesn't boot. My monitor stays black. With my old chip everything is fine. What should i do? I did well with this mobo and dont really want to buy a new one now. :help:
edit: i got the same mobo and same cpu as Juve
Try to UPDATE the BIOS under DOS mode. After this do a full CLEAR CMOS. If you can´t do this with the currrent CPU try with the older one. After the BIOS update change the CPU and see if works...
Good Luck
I hope that will work... gonna try it thank you!
Since you gonna try you could test BIOS18 and BIOS16, always throught DOS mode. BIOS 16 could workout, but with stranges temp, that´s what a read around. I have a C0 CPU, works and overclock like a ROCK.
It whould be nice to know if E0 Quad 45nm CPU work´s with this mobo, using BIOS 16 or 18.
Thanks for the try man!
Se Ya
Quote:
Originally Posted by s3nSeLeZz
Thats what i did.. but it still doesn't work. Dont know why.. flashed Bios in DOS, cleared CMOS and my monitors stays black. :/ **** it :censored:Quote:
Originally Posted by jclafi
:undecided
Sorry for you man, i was looking forward to use a new 45nm "E0" Quad chip, but it looks like it´s a no go then...
I will try to talk with that guy at the E0 tread, perhaps he could hep us...
Se ya
EDIT: Tryed to talk with some guys at Abit lets see if they anwser my question, Se ya man.
Quote:
Originally Posted by s3nSeLeZz
That's really kind m8. Talked to the support, 2 days ago. :telephone:Quote:
Originally Posted by jclafi
They will send me a new bios-chip. That's my last chance... Hope it will work :bowdown:
But thanks for your help anyway. This forum is really awesome.. made me much hope
:surprised: Stay tuned :surprised:
Is there a BIOS ID 18 for FP-IN9 SLI? where can i find it
I have Q9300 and bios id 16 but experiencing same problems as well. random bluescreens.... Now back to my old proc E6550.
I've tried with mine ABIT FP-IN9 and E8400 E0 without sucess.
Updated to BIOS 18 and cleared cmos.
When I power up the system, the cooler runs, but there aren't beep or post.
I'm disappointed. =//
Any sugestions ?
Hello - first post!
I have a non-overclocked FP-IN9 with E6600 running 100% fine for some years.
Now I got a new Q9550 cpu and want to replace the old E6600 by this one.
I updated the bios to version 17 (the latest official one in the site), replaced cpus and cleared cmos.
After power on (with crossed fingers) I was able to entry in the BIOS setup and after some seconds (varying from 10 to 60 seconds) the machine freeze when still inside the BIOS setup.
After sadly reducing the fsb to 1067 MHz ( Q9550 is 1333 MHz ) I was able to start Windows XP installation but got BSoD in the middle of installation. Same thing to Ubuntu (Linux).
For this MB, I see (somewhere) in this forum a link to bios version 18 despite the official site STILL report the last bios update is version 17. Does this means version 18 is too bad to officially be considered an upgrade over version 17 ?
Is there a chance FP-IN9 starts to work with Q9550 if I update to version 18 ?
Are there any special information ( core voltages or anything else ) I need to be aware to make such cpu upgrade ?
Thank you
Marcio
Sorry man but the IN9 dont seen to suport the 45nm Quads, only the Q6600 and Q6700 are suported.
See ya!
Quote:
Originally Posted by MarcioAB
I see ... thank you to share.Quote:
Originally Posted by jclafi
Marcio
Read this dude !
http://forums.hexus.net/abit-care-he...ios-1-8-a.html
EDIT: I find one post that you have on this tread, your IN9 does not work with BIOS 18? Did try the BIOS update under DOS and a clear cmos after?
Turn the system on after changing the jumper to the CLEAR position, just ot be sure,after that change the jumper and iif no video in the screen try to perss 3 times the RESET button, Click, click click, one after the other, this force the motherboard to inicialize em safe mode. :)
Also try to press the reset button for 3 sec time, also this force the motherboard to inicialize em safe mode. :)
Good Luck !
Quote:
Originally Posted by se7zer
Did you try some voltage settings with BIOS 18? Just for fun.. :)
A question BIOS 18 did reconigze exacly your CPU?
Little overvolt on the CPU and N.B / CPU_VTT settings could be heplfull, remmenber only change the N.B voltage if you do some active cooling on it you will need some cooler on N.B. Help me a lot here. :rockon2:
Very easy task by the way, just 40x40mm 4 U$ fan with 3 pin pwm connector. Some 1.43v on N.B and 1.36v could do the trick very well for FSB1333 and a QUAD CPU with stock settings, some 1.28v on the CPU could help, just for fun really... huauhauhauhauh
See ya
Quote:
Originally Posted by MarcioAB
Well ... I moved on with the Q9550 in a P5Q and will let the E6600 running in the FP-IN9.
But the FP-IN9 rig is not operational so I can not check.
Thank you.
Regards
Marcio
Hello!
My little story:
I change my old E7200 to Q9400 (R0), clear CMOS and FP-IN9 SLI with BIOS ID 16 will starts! But CPU temp is 92°C!
- Wow! - say Mobo, and switch off.
After disabling CPU shutdown temp Mobo will start again, without any alarms.
This is not all :)
Q9400 does not recognized on BIOS ID 16. It run on 2000MHz, 6x1333QPB.
Windows 7 x64 crashed with 0x0000003e error, Ubuntu 8.04 starts normally. After reinstalling Windows Vista x64, in device manager found 4 unknown processors. Sad :(
To correct this, i googled HEXUS forums.
With latest BIOS ID 18 all problems are resolved! :)
That's all!
So nice, BIOS 18 did suport 45nm Quad´s !!
Thanks man your info is very usefull !!
Good Luck and have fun with your Quad !
:D
Yes, Quad E0/R0 supported :), but i can't overclock it :(. Neither FSB changing, nor SLI-Ready profile in SPD is not working.
middle three hundreds fsb is all that you'll get out of any 650SLI chipset mobo with a quad so you are already there at 333fsb hence no overclock.
How about SLI-ready memory? With simple enabling it is not working. With overvoltage NB up to 1,36 V it working unstable. With 1,56 V NB is very hot!
I have a FP-IN9, and i buy a 9550, but is not running, the computer doest boot.
I already have udpate bios to version 18..
I already tri clear cmos, but i have again a black screen and the machine dont boot.
Do the BIOS update under DOS mode, maybe this help you out... Your CPU is E0 or R0?
If Zhukov make it work you should make it too, very odd situation.
Try to use BIOS18 and a lower multi, just to test, maybe the problem is the 650i trying to hold of your quad in such high CPU clock. The Q9400 and the Q9550 have the same FSB i guess, but diferent clock speed´s, maybe this can help you out.
Good Luck !
Any news about FP-IN9 & Q8200?
May be motherboard sets default CPU voltage lower than required in specification? If you see only black screen, you can test this with multimeter. My Q9400 works on 1,2 V by default. Specs tell me, it must work on 1,35 V!
Zhukov do you have active cooling in the N.B ? To run FSB 333 with a quad Abit guys maybe had to increased the volts a little bit, and with passive colling this maybe a problem. It´s a BETA BIOS thie version 18, so we can´t blame about it, i´m just trying to understand why with some folks BIOS 18 works very well, and with other dont.
Anyway 45nm C2D C0 & E0 seens to be fine with BIOS 16 and BETA18, the only mistery is the 45m C2Q Cpu´s.
See ya
EDIT: About your C2Q vCORE, spec tells you the máx voltage setting, 1.35v, but the stock voltage is 1.2v with C1E enabled, i guess
Yes, i have 80x80x25 mm active cooler on NB.