fatal1ty an9 32x - c1 or 5d post error

[toddjeffery01]

ok the i have a post error of c1 or 5d

i turned on the pc last nite and nothing happened.
post code of c1.
i was lead to belive its ram issue.

so this is what i have done......

changed the ram to a value 1.8v stick. tried it in all slots.
each time clearing the cmos.
i have also cleared the cmos by removing the battery and removing all power cables. replacing them and nothing.

as i was getting no where i fort id try somethin else.

i moved the grpahics card (7900gt) to the next pci-e slot. the slave slot

i now get the normal lil beep, the pc loads to the post screen. it says.... its detected the procoessor and ram

5200+ am2 althon
1gb 1.8v value ram
from what i belive the lastest bios.

the post code in now 5d.

i cant press del or esc. nothin happens. the keyboard works as this is my keyboard i use for these situations. works in all situations. in ps2 connection.

any help? thanks

[jclafi]

A full description of the computer and it´s parts whould be usefull, including PSU maker.
Also, welcome do Hexus !

[toddjeffery01]

not to sure on what all the parts are mate. not at home with the system. i can post the full spec soon.

its a fatality an9 32x

5200+ x2 athlon 64

scan value ram. or GeIL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800

xfx 7900gt xtreme

about 600/500watt psu however i dont know the make. i have the box at home tho.

x-fi xtreme gamer but i have the 7.1 hd realtek board plugged in. to try and get it goin as i have heard the 5d code is somethin to do with sound.

any more help?



i havent changed anythin in about 3years and i have been cleanin it every 2months.

[BUFF]

5D
1. Initialize Init_Onboard_Super_IO
2. Initialize Init_Onbaord_AUDIO

it is a capital D?

[toddjeffery01]

hummm. its not a capital d. its lower case.

however. how are you ment to do a capital d on a 7 segment display?

it would just look like a 0.

[toddjeffery01]

ok then, where do i go from this step then, try and fix the fault from the c1 error? or the 5d error?

will there be a simple fix or will it invole buying new parts? thanks