ab9 pro dont turn on

[Goadzilla]

hi
after i assembeled my new pc i turn the computer on and no reaction from the motherboard and i recive on the 7's rror number 8.2.
how can i fix it|?
things ive tried:
-replace motherboard
-replace cpu
-replace video card
-replace memory

thanks in advance

[redlight]

8.2 is enable ATX power supply. Are you sure you have all connections plugged in properly 4 pin and 24 pin(not a 20 pin) is your psu large enough?

[Goadzilla]

yes im sure and i try another psu and it dosent work my psu isdefenetly large anough
enermax liberty 430w

[redlight]

Ok try it with the bare minimum 1 stick of ram gpu and cpu. Is the cpu fan plugged in to the correct header?

[Goadzilla]

i try it allready and the cpu fan is plugged corectlly
and even if i dont put any memory at all the mb dont respond

[redlight]

You will have to wait for Sean from Abit to give you a more help in the morning as I have only had this board for a week. I have seen comments on a couple of forums about this board being picky about PSUs.

[ABIT Sean]

The problem is power related. If you have tried changing the CPU and PSU then there can only be a fault with the motherboard.

Have you tried powering on the system outside of the case? There might be a short.