Well i've just finished my latest add on to my car.
blue cold cathodes - 4 in fact, two on the parcel shelf and one in each front foot well.
it looks so sweet!!!!
i'll post some pics when i get home!
I'm over the moon, just want it to be dark all the time now!!
sounds cool
/awaits pics
it'll be around 10ish (time of darkness) before all the pics will be up, but i got the lights from aria (where i work at).
if ur after green there on deal of the day now. just under £8 each. very nice kits
pics!!
plus how easy is it to fit? i want one in my KA!
Hehe, better than that, I removed all the little peanut bulbs from my dashboard lighting and soldered in bl000 LEDs and resistors... All the controls now light up blue rather than manky-green... Now thats a bl00 LED mod!
that also sounds good! again pics!Originally posted by TeePee
Hehe, better than that, I removed all the little peanut bulbs from my dashboard lighting and soldered in bl000 LEDs and resistors... All the controls now light up blue rather than manky-green... Now thats a bl00 LED mod!
This is the worst pic ever....
http://www.sheol.org.uk/car/Dash1.JPG
I'm still waiting for some reverse indiglos to finish off the guages, and the fag lighter loghts up now... plus in reality my dashboard isn't nearly as blurry.... Looks better when its fully dark too....
Even with that quality pic mate it looks sweet.
Living and dying laughing and crying
Once you have seen it you will never be the same
Life in the fast lane is just how it seems
Hard and it is heavy dirty and mean
sweet.... my little KA could do with that... what did you wire to?
That looks sweet, what car do you have?
tom@meangasoline.co.uk | RIP Zoltan
Canon 350d | 50 F/1.8 Mk II | 70-200 F/4 L | 1Gb Sandisk Ultra III
i can see a 'H' on the wheel - if that helps!Originally posted by TomWilko
That looks sweet, what car do you have?
It's a Honda Accord, but it can surely be done to any car...
The bulbs are in little holders in most cars, you take them off, replace them with an LED and solder a SMD resistor on the back... like this:
Of course, it helps to have a guide specifically for your car
right sorry for the delayed reply, but i've been to the JAE car show with my motor.
the lights were standard cold cathodes, i hard wired them into the 12V rail (nicked off the fag lighter) then i got another heated rear window switch, found out witch pins to the switching and got two spade connectors onto them, then run power cable from the front to the back shelf and to the foot wells. once there i cut the molex connectors off the inverter cables so i was left with the connector. the inverter can take two tubes so so i only had to wire up two inverters.
Bobs ur uncle, you have lights in your car!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
