Hello,
Decided to jump on the bandwagon after a bit of persuasion from ScoobZ and Tom, and have just ordered some watercooling stuff from Tom, and a new case to put it inIt's not gonna be as good as some of the things on here, but should be ok, as long as it doesn't leak! :001_tt2:
Specifications
Lian Li PC-A70B
Gigabyte GA-P35-DS3
Intel Core 2 Duo E8600
Sapphire 4850 512MB
2x2GB OCZ Reaper X DDR2 800
Corsair HX520w
Samsung Spinpoint SATA 160GB
Sony-NEC-Optiarc SATA DVD-RW
Thermochill PA120.3
Swiftech Apogee GTZ
DDC 18w & Petrastech top
XSPC Clear single drive bay res
XSPC Blue UV 7/16" Tubing
Feser One Clear Coolant
1/2" barbs
Plans
- Get the hardware in, all wires tidied
- Get the watercooling in, get used to it, see what it can do
- Upgrade to i7 and better graphics card
- Get a window cut, but something odd shaped and original
- Fan controller
- Replace the stock fans with yate loons, and braid them
- Replace the switches with vandal switches
- Cut some holes in the motherboard tray for cable mangement if there aren't good enough routes of putting them
- Powdercoat the internals / externals
Before shots: Air cooled, old case and PSU
All of the water cooling stuff
The case stripped out
The bits from the case
The apogee GTZ on the mobo, you can see the washer type things i was talking about earlier on the first picture of the block
Set up ready for leak testing once the pump and tubing is in
Not convinced that I can make the tubing go from the rad to the res easily... any ideas?
Peter.


LinkBack URL
About LinkBacks
It's not gonna be as good as some of the things on here, but should be ok, as long as it doesn't leak! :001_tt2:









Reply With Quote