Page 1 of 3 123 LastLast
Results 1 to 16 of 33

Thread: Best Spray Paint? How To?

  1. #1
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Best Spray Paint? How To?

    So I have a Silverstone SG03 case, and I want to spray paint the front and side mesh on the case, but I am not sure what type of spray paint, or the best way of doing this.

    I have used spray paint before, but it wasn’t as easy as I initially thought, any advice would be greatly appreciated.

    Oh, I haven’t decided what colour I will use, but it will be a variant of blue.

  2. #2
    I'm ITX
    Join Date
    Jun 2008
    Location
    Liverpool
    Posts
    2,415
    Thanks
    82
    Thanked
    159 times in 148 posts

    Re: Best Spray Paint? How To?

    It's all in the preperation, sand it all down and get a nice surface to the paint and it's alot easier. Depending on the finish you want, depends on what you use.

  3. Received thanks from:

    DeludedGuy (27-07-2009)

  4. #3
    Overclocking Since 1988 nightkhaos's Avatar
    Join Date
    Apr 2009
    Location
    Sydney, AU
    Posts
    1,415
    Thanks
    93
    Thanked
    127 times in 106 posts

    Re: Best Spray Paint? How To?

    Spary painting is realtively simple once you know the basics. First, make sure you have some form of catchment area.

    Second, make sure you invert the can, and discharge the remainer of the paint in the pipe to prevent a "clog" when you do another spray.

    Third, spary onto another surface before the intend surface to ensure that the paint is discharging normally.

    Fourth, spary in strikes close together hozintionally, then vertically, for the best finish.

    I have found very little varitation, apart from quality of colour when you follow these simple steps.
    Desktop (Cy): Intel Core i7 920 D0 @ 3.6GHz, Prolimatech Megahalems, Gigabyte X58-UD5, Patriot Viper DDR3 6GiB @ 1440MHz 7-7-7-20 2T, EVGA NVIDIA GTX 295 Co-Op, Asus Xonar D2X, Hauppauge WinTV Nova TD-500, 2x WD Caviar Black 1TB in RAID 0, 4x Samsung EcoDrive 1.5TB F2s in RAID 5, Corsair HX 750W PSU, Coolermaster RC-1100 Cosmos Sport (Custom), 4x Noctua P12s, 6x Noctua S12Bs, Sony Optiarc DVD+/-RW, Windows 7 Professional Edition, Dell 2408WFP, Mirai 22" HDTV

    MacBook Pro (Voyager): Intel Core 2 Duo @ 2.6GHz, 4GiB DDR2 RAM, 200GB 7200RPM HDD, NVIDIA 8600GTM 512MB, SuperDrive, Mac OS X Snow Leopard, 15.4" Matte Display

    HTPC (Delta-Flyer): Intel Core 2 Q8200 @ 2.33GHz, Zotec GeForce 9300-ITX, 2GiB of DDR2 Corsair XMS2 RAM, KWorld PE355-2T, Samsung EcoDrive F2 1.5TB, In-Win BP655, Noctua NF-R8, LiteOn BluRay ROM Drive, Windows 7 Home Premium, 42" Sony 1080p Television

    i7 (Bloomfield) Overclocking Guide

    Quote Originally Posted by Spock
    I am not our father.

  5. Received thanks from:

    DeludedGuy (27-07-2009)

  6. #4
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Re: Best Spray Paint? How To?

    So will I need to sand it down before I spray paint it? Its all very nice and smooth at the moment, lol.

  7. #5
    Overclocking Since 1988 nightkhaos's Avatar
    Join Date
    Apr 2009
    Location
    Sydney, AU
    Posts
    1,415
    Thanks
    93
    Thanked
    127 times in 106 posts

    Re: Best Spray Paint? How To?

    Quote Originally Posted by DeludedGuy View Post
    So will I need to sand it down before I spray paint it? Its all very nice and smooth at the moment, lol.
    Mainly just make sure the surface is clean. You only need to sand it if it is a bit rough. Usually after the first coat you can determine if you should have sanded it.
    Desktop (Cy): Intel Core i7 920 D0 @ 3.6GHz, Prolimatech Megahalems, Gigabyte X58-UD5, Patriot Viper DDR3 6GiB @ 1440MHz 7-7-7-20 2T, EVGA NVIDIA GTX 295 Co-Op, Asus Xonar D2X, Hauppauge WinTV Nova TD-500, 2x WD Caviar Black 1TB in RAID 0, 4x Samsung EcoDrive 1.5TB F2s in RAID 5, Corsair HX 750W PSU, Coolermaster RC-1100 Cosmos Sport (Custom), 4x Noctua P12s, 6x Noctua S12Bs, Sony Optiarc DVD+/-RW, Windows 7 Professional Edition, Dell 2408WFP, Mirai 22" HDTV

    MacBook Pro (Voyager): Intel Core 2 Duo @ 2.6GHz, 4GiB DDR2 RAM, 200GB 7200RPM HDD, NVIDIA 8600GTM 512MB, SuperDrive, Mac OS X Snow Leopard, 15.4" Matte Display

    HTPC (Delta-Flyer): Intel Core 2 Q8200 @ 2.33GHz, Zotec GeForce 9300-ITX, 2GiB of DDR2 Corsair XMS2 RAM, KWorld PE355-2T, Samsung EcoDrive F2 1.5TB, In-Win BP655, Noctua NF-R8, LiteOn BluRay ROM Drive, Windows 7 Home Premium, 42" Sony 1080p Television

    i7 (Bloomfield) Overclocking Guide

    Quote Originally Posted by Spock
    I am not our father.

  8. Received thanks from:

    DeludedGuy (27-07-2009)

  9. #6
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Re: Best Spray Paint? How To?

    Also, what the distance I should be spraying it from? Any good brands of spray paint out there? Should I get a glossy finish? Matt finish?

    Cheers for the good advice so far, I will summarise all of it at the end.

  10. #7
    Overclocking Since 1988 nightkhaos's Avatar
    Join Date
    Apr 2009
    Location
    Sydney, AU
    Posts
    1,415
    Thanks
    93
    Thanked
    127 times in 106 posts

    Re: Best Spray Paint? How To?

    About 20 to 30 centimeters is a good distance. As for glossy or matte, do you want it shinny or not?
    Desktop (Cy): Intel Core i7 920 D0 @ 3.6GHz, Prolimatech Megahalems, Gigabyte X58-UD5, Patriot Viper DDR3 6GiB @ 1440MHz 7-7-7-20 2T, EVGA NVIDIA GTX 295 Co-Op, Asus Xonar D2X, Hauppauge WinTV Nova TD-500, 2x WD Caviar Black 1TB in RAID 0, 4x Samsung EcoDrive 1.5TB F2s in RAID 5, Corsair HX 750W PSU, Coolermaster RC-1100 Cosmos Sport (Custom), 4x Noctua P12s, 6x Noctua S12Bs, Sony Optiarc DVD+/-RW, Windows 7 Professional Edition, Dell 2408WFP, Mirai 22" HDTV

    MacBook Pro (Voyager): Intel Core 2 Duo @ 2.6GHz, 4GiB DDR2 RAM, 200GB 7200RPM HDD, NVIDIA 8600GTM 512MB, SuperDrive, Mac OS X Snow Leopard, 15.4" Matte Display

    HTPC (Delta-Flyer): Intel Core 2 Q8200 @ 2.33GHz, Zotec GeForce 9300-ITX, 2GiB of DDR2 Corsair XMS2 RAM, KWorld PE355-2T, Samsung EcoDrive F2 1.5TB, In-Win BP655, Noctua NF-R8, LiteOn BluRay ROM Drive, Windows 7 Home Premium, 42" Sony 1080p Television

    i7 (Bloomfield) Overclocking Guide

    Quote Originally Posted by Spock
    I am not our father.

  11. Received thanks from:

    DeludedGuy (27-07-2009)

  12. #8
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Re: Best Spray Paint? How To?

    Quote Originally Posted by nightkhaos View Post
    About 20 to 30 centimeters is a good distance. As for glossy or matte, do you want it shinny or not?
    Im not sure tbh, I will have to compare somewhere.

  13. #9
    Overclocking Since 1988 nightkhaos's Avatar
    Join Date
    Apr 2009
    Location
    Sydney, AU
    Posts
    1,415
    Thanks
    93
    Thanked
    127 times in 106 posts

    Re: Best Spray Paint? How To?

    Well is the finished project going to be in a very brightly lit place? If yes, then consider going Matte to reduce reflections.
    Desktop (Cy): Intel Core i7 920 D0 @ 3.6GHz, Prolimatech Megahalems, Gigabyte X58-UD5, Patriot Viper DDR3 6GiB @ 1440MHz 7-7-7-20 2T, EVGA NVIDIA GTX 295 Co-Op, Asus Xonar D2X, Hauppauge WinTV Nova TD-500, 2x WD Caviar Black 1TB in RAID 0, 4x Samsung EcoDrive 1.5TB F2s in RAID 5, Corsair HX 750W PSU, Coolermaster RC-1100 Cosmos Sport (Custom), 4x Noctua P12s, 6x Noctua S12Bs, Sony Optiarc DVD+/-RW, Windows 7 Professional Edition, Dell 2408WFP, Mirai 22" HDTV

    MacBook Pro (Voyager): Intel Core 2 Duo @ 2.6GHz, 4GiB DDR2 RAM, 200GB 7200RPM HDD, NVIDIA 8600GTM 512MB, SuperDrive, Mac OS X Snow Leopard, 15.4" Matte Display

    HTPC (Delta-Flyer): Intel Core 2 Q8200 @ 2.33GHz, Zotec GeForce 9300-ITX, 2GiB of DDR2 Corsair XMS2 RAM, KWorld PE355-2T, Samsung EcoDrive F2 1.5TB, In-Win BP655, Noctua NF-R8, LiteOn BluRay ROM Drive, Windows 7 Home Premium, 42" Sony 1080p Television

    i7 (Bloomfield) Overclocking Guide

    Quote Originally Posted by Spock
    I am not our father.

  14. #10
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Re: Best Spray Paint? How To?

    Quote Originally Posted by nightkhaos View Post
    Well is the finished project going to be in a very brightly lit place? If yes, then consider going Matte to reduce reflections.
    It will be in my bedroom, which is not very bright.

  15. #11
    Overclocking Since 1988 nightkhaos's Avatar
    Join Date
    Apr 2009
    Location
    Sydney, AU
    Posts
    1,415
    Thanks
    93
    Thanked
    127 times in 106 posts

    Re: Best Spray Paint? How To?

    Quote Originally Posted by DeludedGuy View Post
    It will be in my bedroom, which is not very bright.
    Do you want the paint to reflect the light of the room, or just absorb it? (i.e. compare a shinny new copper surface with one that is slightly oxidsed, one refects almost like a mirror, and the other is just copper coloured.)
    Desktop (Cy): Intel Core i7 920 D0 @ 3.6GHz, Prolimatech Megahalems, Gigabyte X58-UD5, Patriot Viper DDR3 6GiB @ 1440MHz 7-7-7-20 2T, EVGA NVIDIA GTX 295 Co-Op, Asus Xonar D2X, Hauppauge WinTV Nova TD-500, 2x WD Caviar Black 1TB in RAID 0, 4x Samsung EcoDrive 1.5TB F2s in RAID 5, Corsair HX 750W PSU, Coolermaster RC-1100 Cosmos Sport (Custom), 4x Noctua P12s, 6x Noctua S12Bs, Sony Optiarc DVD+/-RW, Windows 7 Professional Edition, Dell 2408WFP, Mirai 22" HDTV

    MacBook Pro (Voyager): Intel Core 2 Duo @ 2.6GHz, 4GiB DDR2 RAM, 200GB 7200RPM HDD, NVIDIA 8600GTM 512MB, SuperDrive, Mac OS X Snow Leopard, 15.4" Matte Display

    HTPC (Delta-Flyer): Intel Core 2 Q8200 @ 2.33GHz, Zotec GeForce 9300-ITX, 2GiB of DDR2 Corsair XMS2 RAM, KWorld PE355-2T, Samsung EcoDrive F2 1.5TB, In-Win BP655, Noctua NF-R8, LiteOn BluRay ROM Drive, Windows 7 Home Premium, 42" Sony 1080p Television

    i7 (Bloomfield) Overclocking Guide

    Quote Originally Posted by Spock
    I am not our father.

  16. #12
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Re: Best Spray Paint? How To?

    Quote Originally Posted by nightkhaos View Post
    Do you want the paint to reflect the light of the room, or just absorb it? (i.e. compare a shinny new copper surface with one that is slightly oxidsed, one refects almost like a mirror, and the other is just copper coloured.)
    Hmmmmm....I may just buy two types and experiment.

  17. #13
    Senior Member Pob255's Avatar
    Join Date
    Apr 2007
    Location
    The land of Brum
    Posts
    10,128
    Thanks
    605
    Thanked
    1,220 times in 1,121 posts
    • Pob255's system
      • Motherboard:
      • Asus M5A99X EVO
      • CPU:
      • FX8350 & CM Hyper 212+
      • Memory:
      • 4 x 2gb Corsair Vengence 1600mhz cas9
      • Storage:
      • 512gb samsung SSD +1tb Samsung HDD
      • Graphics card(s):
      • EGVA GTX970
      • PSU:
      • Seasonic GX 650W
      • Case:
      • HAF 912+
      • Operating System:
      • W7 Pro
      • Monitor(s):
      • iiyama XB3270QS-B1 32" IPS 1440p

    Re: Best Spray Paint? How To?

    If you buy from a shop they should be able to show you samples to give you an idea of what the final finish will look like.

    Glossy is shiney (good eg go and have a look at a car that just been cleaned)
    Matte is dull and non-shiney
    Which to use? I'm not sure it's up to you how you want the final finish

    The issue you can have here is there's Matte and Matte, a true Matte finish is very dull and looks almost powerdy, many things called Matte are actually closer to a satine finish, which is very smooth and slightly shiney but still more shiney than ture Matte.
    However this 2nd satine matte is probably what you want if you do want a matte finish.

    Sanding depends on the current surface and how well the paint will stick to it.
    However as this is mesh you're planning to paint sanding it could pose real problems.
    You will want to give it a real good clean, my advice is to remove it from the panels, wash it well with hot water and basic cheap washing up liquid to fully remove and dust and degrease it.
    (You don't want expensive stuff because you don't want any moisterisers in it)
    rinse it well, a shower is useful here and let it fully dry out before painting.

    For spray painting hanging up the object your painting is good as is working outdoors (unless you have a properly ventilated space.)
    A washing line and cotten thread to hang the object works well as long as it's not too heavy.
    When spray painting outside don't do it if it's raining or spitting or it's windy

    I take it you have the silver version of this case not the black version?

  18. Received thanks from:

    DeludedGuy (27-07-2009)

  19. #14
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Re: Best Spray Paint? How To?

    Quote Originally Posted by Pob255 View Post
    I take it you have the silver version of this case not the black version?
    Thanks for that, I have the black version actually, its still in its box never used before, so I imagine a quick rinse under the shower should do it.

  20. #15
    Senior Member Pob255's Avatar
    Join Date
    Apr 2007
    Location
    The land of Brum
    Posts
    10,128
    Thanks
    605
    Thanked
    1,220 times in 1,121 posts
    • Pob255's system
      • Motherboard:
      • Asus M5A99X EVO
      • CPU:
      • FX8350 & CM Hyper 212+
      • Memory:
      • 4 x 2gb Corsair Vengence 1600mhz cas9
      • Storage:
      • 512gb samsung SSD +1tb Samsung HDD
      • Graphics card(s):
      • EGVA GTX970
      • PSU:
      • Seasonic GX 650W
      • Case:
      • HAF 912+
      • Operating System:
      • W7 Pro
      • Monitor(s):
      • iiyama XB3270QS-B1 32" IPS 1440p

    Re: Best Spray Paint? How To?

    No you will want to degrease it as that may cause the paint not to stick correctly, basic washing up liquid works very well and is dirt cheap

    I thought you wanted to paint it balck which is why I asked about the colour, I missed the word blue

    One thing you may well need to do is get a primer as well as a paint, painting over black will often leave the colour you're painting dull and darker than it should be.
    For a lighter/brighter final colour you ideally want to paint over a white under/base coat.

    An etching primer will be best (I think, not 100% sure here)
    and very important, esp as this is mesh, thin layers.
    never paint a thick layer 3 or more thin layers is much better, let it dry between each layer (touch dry, time depending on paint and environment conditions)
    And leave it to full dry overnight or for 24 hours after the final coat.

  21. Received thanks from:

    DeludedGuy (27-07-2009)

  22. #16
    Raging Bull DeludedGuy's Avatar
    Join Date
    Dec 2003
    Location
    London
    Posts
    2,594
    Thanks
    112
    Thanked
    76 times in 55 posts
    • DeludedGuy's system
      • Motherboard:
      • Gigabyte H87M-HD3
      • CPU:
      • Core i5 4440
      • Memory:
      • 8GB DDR3 1800mhz
      • Storage:
      • 250GB Samsung 840 SSD
      • Graphics card(s):
      • Gigabyte R9 270 OC 2GB
      • PSU:
      • BeQuiet Pure Power L8 600w
      • Case:
      • Silverstone TJ08-E
      • Operating System:
      • Windows 7
      • Monitor(s):
      • 24" Dell U2414H
      • Internet:
      • 75Mb BT Infinity

    Re: Best Spray Paint? How To?

    I found these two pics, any idea what type of paint they used?




Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Touch-Up Paint or Someone to Spray It?
    By UseItNow in forum Automotive
    Replies: 5
    Last Post: 28-08-2008, 07:17 PM
  2. Spray Paint, Red and White ATI project..
    By sawyen in forum Chassis and Mods
    Replies: 1
    Last Post: 29-04-2006, 10:14 PM
  3. Knight Rider CWC
    By Marquee in forum Chassis and Mods
    Replies: 23
    Last Post: 13-12-2005, 03:43 PM
  4. Replies: 3
    Last Post: 10-12-2004, 06:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •