The Blood Of 1000 Angels

[Bitemarks666]

Since I have finished Andy's 300 Lost Souls I have decided to get started on my Cosmos 1000
Cable management holes cut and interanls paint in Fiat Flame Red

Plastic side covers painted in black enamel paint

Handles painted in Fiat Flame Red

Back together again

[Bitemarks666]

The LC gear

Rad, res and pump installed

Close up of the GTZ with the black mount

Another shot of the GTZ installed

PCI slot covers, HDD bay handles and slot cover screws painted in black enamel paint

LC bled and leak tested and the rest of the hardware installed

[Bitemarks666]

Top panel cut out for more airflow this will be covered with mesh later

A shot of the top on

inside of the side panel after 12 hours in acetone

and i got some overclocking done today
suicide
4GHZ with the 4th core unlocked
Stable

[Bitemarks666]

Xilence Pro red LED fans, red 5mm LEDs, metal grill and velcro

XFX XXX 5850

5850 unboxing

Close up

Inside of side panel painted

[Bitemarks666]

A shot of the inside with LED fans, LEDs in the pump and 5850

A shot with no flash

[Bitemarks666]

grill painted and fitted

Top fitted

And without flash

[Bitemarks666]

I have recieved a XSPC RS240 rad, EK 5850 Block, IandH Killcoil, 4x Dangerden fatboy barbs and 2 metres of primochill gloss red coil springs yesterday Il get some pics of them up in a bit Im still waiting for my IandH Stealthres to arrive before I tear down the case, The bottom set of HDD bay will be going to make room for the rad and Il be cutting another fan hole in the bottom, Im also thinking of cutting an access hole for the socket back plate

[Bitemarks666]

XSPC RS240 rad for the bottom of the case before the GPU

EK FC-5850 box

EK FC-5850 GPU block

2 metres of Primochill gloss red coils, 4 DD fatboy barbs and an IandH killcoil

[Bitemarks666]

IandH Stealthres has arrived. Some pics
Nice sturdy tube

all the hardware

the stealth anti-cyclone plate

the res holders

the word deluxe on the packaging is correct, the quality of the res is second to none, thanks goes to IandH for making this absolutely monumental res and Gary from sidewinders for gettng the res here so quickly

[Pob255]

Looks nice, but for the love of all that's holy, make the photo's smaller, or some form of thumb nail.
I first tried to look at this thread on my netbook, trying to look at a 1600x1200 image on a 1024x600 screen is just not possible, heck even on this 1680x1050 I still have to side scroll on a forum post.

[DavyBoy]

I like the red mate, I've just had my TJ07 powder coated in a similar shade of red as this.

[Bitemarks666]

cheers lads, sorry about the pics I sometimes I forget there are smaller monitors than mine

[Pob255]

Not just monitor size but also file size to consider.
a 800x600 image while being half the size is a quarter of the area and (roughly) file size as well.
Although you seem to have a handle on that with some very aggressive compression.

If you base photo's are 1600x1200 then consider reducing them to half size, 800x600 that will actually help sharpen them up slightly and smaller image sizes means smaller base file size so you don't have to go so aggressive on the compression.
Most of my photo's have gone through a weak unsharp mask, a level/high-low filter and sometimes a smart blur before getting rescaled and compressed.

Must admit I was considering a red and black build, but I would of had to get a foxconn Inferno Katana to go in it.

[Bitemarks666]

naughty naked card

thats better, some clothes on

The bottom HDD bay removed, the IandH res holders installed and a shroud installed for the rad

[Bitemarks666]

Res and rad fitted

Res, rad and pump fitted with hoses

Loop finished

close up of the GPU block

another shot

Dont worry I have I put cable ties on the barbs aswell now. Its filled and is bleeding

[Bitemarks666]

im just waiting on some funds to get a window and the project title CNCed into the side panel and I should be done