Results 1 to 3 of 3

Thread: Side panel window

  1. #1
    Senior Member
    Join Date
    May 2008
    Posts
    233
    Thanks
    17
    Thanked
    3 times in 3 posts
    • douglasb's system
      • Motherboard:
      • Asus P5K Premium/wifi-ap
      • CPU:
      • Intel Q6600
      • Memory:
      • 4GB Corsair XMS2 800MHz 4-4-4-12
      • Storage:
      • 2x 500GB Samsung F1
      • Graphics card(s):
      • AMD HD6870
      • PSU:
      • 520W Corsair HX series
      • Case:
      • Cooler Master CM 690
      • Operating System:
      • Vista Premium (64bit)

    Side panel window

    I want to put a window in the side panel of my cooler master CM690, I've not done any modding before so thought I'd ask for help before hacking up the case.

    When you put in a window do you sit the window behind the side panel or in the space where the metal you cut out used to be?
    I know either would be possible but I'm assuming placing it behind the panel would be easier, only thing about that though would be that there would be a step from the side panel to the window, is that just something that everyone deals with?

    Thanks

  2. #2
    Senior Member Pob255's Avatar
    Join Date
    Apr 2007
    Location
    The land of Brum
    Posts
    10,128
    Thanks
    605
    Thanked
    1,220 times in 1,121 posts
    • Pob255's system
      • Motherboard:
      • Asus M5A99X EVO
      • CPU:
      • FX8350 & CM Hyper 212+
      • Memory:
      • 4 x 2gb Corsair Vengence 1600mhz cas9
      • Storage:
      • 512gb samsung SSD +1tb Samsung HDD
      • Graphics card(s):
      • EGVA GTX970
      • PSU:
      • Seasonic GX 650W
      • Case:
      • HAF 912+
      • Operating System:
      • W7 Pro
      • Monitor(s):
      • iiyama XB3270QS-B1 32" IPS 1440p

    Re: Side panel window

    3 ways you can do it, outside the panel, inside the panel or inline with the panel.

    inside the panel is easiest, but it will stick in slightly so you have to be aware of it.
    outside the panel is more tricky to get it looking neat.
    inline with the panel is the most complicated and needs the most accurate cutting.

    Bill own did a great tutorial for case windows http://www.youtube.com/watch?v=WpZoE-zj0-k

    if you want any advice on it just ask

  3. #3
    Drum & Bass Till I Die deejayburnout's Avatar
    Join Date
    Jun 2012
    Location
    Kinglassie, Fife
    Posts
    2,013
    Thanks
    296
    Thanked
    133 times in 114 posts
    • deejayburnout's system
      • Motherboard:
      • Gigabyte x470 Aorus Ultra Gaming
      • CPU:
      • Ryzen 2600 at stock speeds ( for now)
      • Memory:
      • 2 x Corsair 8GB DDR4 Vengeance LPX 3000MHz
      • Storage:
      • Gigabyte 128GB M.2 PCIe x2 NVMe SSD, 120GB Kingston SV200, 2 x 1TB WD Drive, 2 x 2TB WD Drive
      • Graphics card(s):
      • ASUS ROG Strix RX 580 8G Gaming OC Edition
      • PSU:
      • OCZ 750 Watt
      • Case:
      • NZXT Noctis 450
      • Operating System:
      • Windows 10 64bit
      • Monitor(s):
      • LG 34UM65-P Ultrawide
      • Internet:
      • 72mb Down 19mb up - Vodafone

    Re: Side panel window

    If you are cutting with a jigsaw, take your time and make sure the blade is designed for thin metal.

    Also drill the 4 corners to aid cutting as well.
    Better to Burn out than Fade Away
    Check out my Youtube channel - Crispy Crisperson

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •