Hey all,
Started a mod months back which went wrong, so I decided to do it all from scratchit's themed around Assassins Creed and my love for the colour orange
Taken me a couple of months, my first time. Hope you all like itdecided to post the whole log here.
Before I start I want to say thanks to Pob255 for giving me some great suggestions for this mod!So thanks Pob
Original
Plain simple case. I did use vinyl which turned out awful
Things I used
Some simple things I used for the extras, sponge neoprene for vibrations and stopping scratches with some acrylic glue.
Used shelf holders for holding the acrylic in place (orange) and the black ones are for inside for the front fans
Sanding + Cutting
Sanding
Top panel destroyed
First I cut the top to make an opening for free air to move out the top
Rear fan space eliminated
Then I destroyed the rear fan space.
Side panel punched
Next was to punch a great big hole into the motherboard panel for hot air from behind the board to leave freely. I flattened it out later with some blocks of wood.
Acrylic side crafted
The acrylic window was cut to size and kind of stencilled away at the film to leave the logo on
Cover up!
The top fan bay which is removable was covered up and so was the front bezel so I could start spraying it later
Began sanding
I then started sanding everything down.
![]()


LinkBack URL
About LinkBacks
it's themed around Assassins Creed and my love for the colour orange 
decided to post the whole log here.







Reply With Quote











