any1 know were i can get some brading so i can do my wires up? i'm currently using that maplin spiral stuff and hate it.
cheers
{edited} for swearing . Gordy :)
Printable View
any1 know were i can get some brading so i can do my wires up? i'm currently using that maplin spiral stuff and hate it.
cheers
{edited} for swearing . Gordy :)
kustom.co.uk
The Mod House
Over-Clock.com
...or a Google search??
cheers, the ones on the modhouse look sweet!!!
thanks again
no problem m8
Am I right in thinking that you have to remove the molex connectors to be able to fit this stuff?
yes, just use a nail to do it:)
Braiding looks class!
http://photos.truenspirit.com/albums...braiding_1.jpg
Anyone used any of that shower hosing type stuff before? The same stuff as Gnome.. looks really cool but i'm curious about the safty of the metal tubing and the mobo etc..?
That could be a problem...but i guess you could insulate the ends with plastic caps or something...and make sure it's well away from the mobo!!
But if you accidently move your case and they slip.... *BANG*... dead PC :(.
the one from Kustom looks like metal tubing but its actually plastic & is split lengthways so its a doddle to use & causes no mobo shorting type worriesQuote:
Originally posted by Arien
Anyone used any of that shower hosing type stuff before? The same stuff as Gnome.. looks really cool but i'm curious about the safty of the metal tubing and the mobo etc..?
i actually have (approx) 1.5 ft of this stuff still lying around in my spare room - built a pc for a mate with a window & he wanted some used on his - if u are gonna use this pm me & i'll dig it out
just get some heatshrink for the ends
With braiding yes.Quote:
originally posted by Auron
Am I right in thinking that you have to remove the molex connectors to be able to fit this stuff?
If you look inside one of the ends of the molex, you'll see little barbs holding each pin into the plastic cover. You carefully bend each barb so that it's flush with the rest of the pin, and slide them out.
Then slip the braiding on, seal the ends with some heat shrink if you want to, and open up those barbs again.
Just be sure that you know which way they go back into the plug, after you've put the braiding on cos many modders have accidentally swapped the 12v and 5v lines around (which can be detrimental to the well being of your HDD and optical drives ;)