-
Lian Li G70
All,
Thought you might want to have a nose at my latest project. A watercooled E6600, 680i, 8800GTX based beast....all housed in a case which has been modded by Phil Stanbridge at Extreme Prometia...:woowoo:
I think you'll agree...top drawer job!!
http://upload.overclock3d.net/get.php?id=1691
http://upload.overclock3d.net/get.php?id=1692
http://upload.overclock3d.net/get.php?id=1695
-
Looking smart that mate, I can recommend a box of O-rings off ebay, youll see why when you get the fans and hard drives in, especially if you have a raptor :)
-
Thanks mate.
Do I need any particular size o-rings??
Also, on your build....did u use a thermochill performance shroud??
-
I made my own shroud/cowelling thing out of a v1000 side panel :D but you dont need one, mine was only so you cant see the rad, but your window is much lower cut than mine, so you wouldnt see it anyway....but, if you get some cheapo fans and cut the fan out, the body of them makes a great spacer for the top of the case, that way, you dont puncture the rad when you put the screws in :)
edit: orings, just a selection of small ones, or if you can get specific ones, m3 are always a winner. I used them for the fans, between the case and the hard drive cage screws and any other screws really, also, a couple of thin strips of foam under the hard drive cage runners works great as well. I used laminate flooring underlay.