Xbox 360 Arcade Stick Project
Thought I might share this if anyone's interested. I'd appreciate some feedback!
I'm constructing a couple of wireless arcade sticks for my Xbox 360.
Here's what I've got so far:
The Box - This is made from pine. Not exactly the best place to show it, on a laminated table, but you get the general idea of what's going to happen.
http://s3.tinypic.com/syw5km.jpg
The Pad - A wireless pad butchered from a pink controller. The new pads are all common ground, so no extra circuitry required. I thought I was going to have to convert, but phewft! Soldering the contacts wasn't too difficult, you just have to know where to solder and then scrape the carbon coating off. Hot glue was applied to keep the wires in place. Next pad that I do will definitely have thicker wire, as this stuff is a nightmare!
http://s3.tinypic.com/azc31e.jpg
The Buttons - I'm using a mixture of Sanwa and Seimitsu buttons, but definitely a Sanwa joystick (you can see it in the picture above on the floor on the left!) The Sanwa buttons are OBSN 30mm and the Seimitsu are 30mm PS-14-GN and 24mm PS-14-DN.
http://s3.tinypic.com/2hgral0.jpg
That's all for now, I'll update again when I've done some more work! :)
Re: Xbox 360 Arcade Stick Project
Cool, I'm assuming this will be finished in time for SFIV? :D
Re: Xbox 360 Arcade Stick Project
I need to have three done by then, or I'm for the chop!
Re: Xbox 360 Arcade Stick Project
the corners of the wooden box might be a bit uncomfy on the legs though or are you going to pad them a bit?
Re: Xbox 360 Arcade Stick Project
All the edges will be routed with round over bits so should be nice and smooth.
Re: Xbox 360 Arcade Stick Project
cool, because the hori i have is a bit uncomfortable unless you pop it on a pillow.
look foward to seeing the results :)
Re: Xbox 360 Arcade Stick Project
say hello to my litto' friend!
http://s3.tinypic.com/2m7hm6e.jpg
Fitted with a 30mm spade bit for the button holes.
Re: Xbox 360 Arcade Stick Project
Awesome! Where'd you steel the drill press from?
Re: Xbox 360 Arcade Stick Project
bought it, from Machine Mart haha. It's my birthday present from Jen :D
Re: Xbox 360 Arcade Stick Project
Looks good, although I am looking at getting the purchasing team to get the Madcatz ones stocked at SCAN before SF is released, if I get any confirmation shall let you know just in case you don't get them finished in time :)
Good luck with the project, looks good so far
Re: Xbox 360 Arcade Stick Project
I'm not so keen on the MadCatz ones because they're wired, but if you could let me know anyway, that'd be great :D
Cheers Carl!
Re: Xbox 360 Arcade Stick Project
Quote:
Originally Posted by
Steve B
I'm not so keen on the MadCatz ones because they're wired, but if you could let me know anyway, that'd be great :D
Cheers Carl!
no way you could mod them to be wireless using the wireless controller(s) you've dismantled? :P
Re: Xbox 360 Arcade Stick Project
doubtful :(
Plus, I don\'t want to be paying over a hundred quid for a tournament edition just to tear it apart :P
Re: Xbox 360 Arcade Stick Project
What were you planning to cover the top of the box with or will it just be painted?
Re: Xbox 360 Arcade Stick Project
Quote:
Originally Posted by
Zap
What were you planning to cover the top of the box with or will it just be painted?
The top is split into two layers:
1 - The surface layer, made from 2mm acrylic provides a protective cover for the art inlay.
2 - The support layer, made from 6mm MDF provides a place to anchor the buttons and the joystick.
The first box I make will be like this. The second box I make, I plan on making it out of a single piece of wood, like in an electric guitar.
Re: Xbox 360 Arcade Stick Project
Quote:
Originally Posted by
Carlh
Looks good, although I am looking at getting the purchasing team to get the Madcatz ones stocked at SCAN before SF is released, if I get any confirmation shall let you know just in case you don't get them finished in time :)
Good luck with the project, looks good so far
*furious nod*:crazy::crazy::crazy: