Re: H60 I7 2600K Overheating
Is there any software for the H60? What do you have the fan headers plugged into?
Re: H60 I7 2600K Overheating
No there is no software installed for the H60, there is the corsair link software but that just shows me the speeds etc.
I have replaced the mother board since this issue , since then i have had the same problem which indicates to me the pump on the h60 is not working as it should be.
I have moved the pump to the chassis Fan 3 Header as it was over heating on cpu fan 2, and on case fan 1 and 2. It seems to work on 3 for some bizarre reason and is holding about 60c under stress.
I did go into the bios and check that cpu fan 2 and case fan 1 and 2 were all set on max output and 100%, but it didnt seem to work.
strange! works now on case fan 3
Re: H60 I7 2600K Overheating
Sounds like it could be a power issue. On my H80i there's a Sata connector for power - make sure it's connected if you have one too and try another connector as well.