Results 1 to 10 of 10

Thread: Memory Compatibilty with Intel Board DP35DP

  1. #1
    Registered+
    Join Date
    Aug 2007
    Posts
    17
    Thanks
    0
    Thanked
    0 times in 0 posts

    Memory Compatibilty with Intel Board DP35DP

    Hi there,


    I have a query about memory compatibility.

    The corsair site doesn't list the motherboard for the memory I was going for. Could I check if the memory modules listed below will run well in the following Intel borad??

    Also is there a noticeable differnce in performance between the two?

    Motherboard - DP35DP
    Spec:
    1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts
    Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported.
    8 GB maximum total system memory using DDR2 667 or DDR2 533 DIMMs; 4 GB maximum total system memory using DDR2 800 DIMMs
    Minimum total system memory: 512 MB
    Non-ECC DIMMs
    Serial Presence Detect
    DDR2 800 or DDR2 667 MHz SDRAM DIMMs
    DDR2 667 SIMMs with SPD timings of only 5-5-5 (tCL-tRCD-tRP)
    DDR2 800 SIMMs with SPD timings of only 5-5-5 or 6-6-6 (tCL-tRCD-tRP)


    Modules (option 1)
    LN14277
    2GB (2x1GB) CorsairTwinX XMS2, DDR2 PC2-6400 (800), 240 Pins, Non-ECC Unbuffered, CAS 4-4-4-12, EPP

    (option 2)
    LN11596
    2GB (2x1GB) CorsairTwinX XMS2, DDR2 PC2-6400 (800), 240 Pins, Non-ECC Unbuffered, CAS 5-5-5-12

    Many Thanks
    Joe

  2. #2
    Registered User Yellowbeard's Avatar
    Join Date
    Oct 2006
    Location
    Atlanta,GA, USA.
    Posts
    1,366
    Thanks
    18
    Thanked
    74 times in 67 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    Since you cannot adjust the memory voltage on that MOBO:

    Motherboard - DP35DP
    Spec:
    1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts
    You will need to use our Value Select memory which runs at 1.8v and at JEDEC timings.

    I would recommend a PC5300 that suits your needs for the amount: http://www.corsairmemory.com/products/value_select.aspx

  3. #3
    Registered+
    Join Date
    Aug 2007
    Posts
    17
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Memory Compatibilty

    OK thanks

  4. #4
    Registered User
    Join Date
    Nov 2007
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    I have a related question, I found this thread while googling...
    I have a DP35DP board as well, and I'm using 2 DIMMs of Corsair VS DDR2-533. Now, Intel doesn't list the board as supporting DDR2-533 memory, even though it's working fine for me. I want to add an additional 2 DIMMs that are the same kind as my current ones, and I want to be sure that the board will support 4GB (4x1GB DIMMs) of DDR2-533 before I order the memory. Does anyone know if it will work?

  5. #5
    Registered User Yellowbeard's Avatar
    Join Date
    Oct 2006
    Location
    Atlanta,GA, USA.
    Posts
    1,366
    Thanks
    18
    Thanked
    74 times in 67 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    It should but, you should check with Intel to be sure.

  6. #6
    Registered User
    Join Date
    Nov 2007
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    Quote Originally Posted by Yellowbeard View Post
    It should but, you should check with Intel to be sure.
    well, the problem is that intel claims the board won't work with my current 2gb of ddr2-533, but it does

  7. #7
    Registered User Yellowbeard's Avatar
    Join Date
    Oct 2006
    Location
    Atlanta,GA, USA.
    Posts
    1,366
    Thanks
    18
    Thanked
    74 times in 67 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    My guess is that it will work if you have a 1066CPU but it won't with a 1333 as there will be no downclock option for the memory in the bios. You are welcome to try it but if there is any doubt, I would go with Intel's recommendation.

  8. #8
    Registered User
    Join Date
    Nov 2007
    Posts
    3
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    Quote Originally Posted by Yellowbeard View Post
    My guess is that it will work if you have a 1066CPU but it won't with a 1333 as there will be no downclock option for the memory in the bios. You are welcome to try it but if there is any doubt, I would go with Intel's recommendation.
    i DO have a 1066 cpu, and i bet you're right

  9. #9
    Registered User
    Join Date
    Apr 2009
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    Hi,
    I have a computer with the DP35DP and my (2x2gb) OCZ (OCZ Technology OCZ2V6672G 2GB 667MHz DDR2 PC2-5400) memory.
    When I put them on the motherboard, it reads ...
    But when I call, the slow the graphics in cumputador and teh computer too ... But when I put only 2gb of memory, is not that slow ...
    Do you know why this problem?

  10. #10
    Registered User Yellowbeard's Avatar
    Join Date
    Oct 2006
    Location
    Atlanta,GA, USA.
    Posts
    1,366
    Thanks
    18
    Thanked
    74 times in 67 posts

    Re: Memory Compatibilty with Intel Board DP35DP

    Quote Originally Posted by koltipelto View Post
    Hi,
    I have a computer with the DP35DP and my (2x2gb) OCZ (OCZ Technology OCZ2V6672G 2GB 667MHz DDR2 PC2-5400) memory.
    When I put them on the motherboard, it reads ...
    But when I call, the slow the graphics in cumputador and teh computer too ... But when I put only 2gb of memory, is not that slow ...
    Do you know why this problem?
    This section if for support of Corsair memory and not OCZ. Please contact OCZ for assistance with their products.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. ABIT IP35 PRO Bearlake REVIEW
    By gilgamesh in forum abit.care@HEXUS
    Replies: 18
    Last Post: 08-07-2009, 01:45 AM
  2. Dual Channel Memory on S939 Board
    By phoenix198 in forum Help! Quick Relief From Tech Headaches
    Replies: 8
    Last Post: 21-05-2007, 08:07 PM
  3. Intel ICH6RW manufacturing issue
    By Steve in forum HEXUS Reviews
    Replies: 0
    Last Post: 25-06-2004, 04:37 PM
  4. SFF FAQ And Drivers - Updated 13th June 2004
    By XTR in forum PC Hardware and Components
    Replies: 10
    Last Post: 11-08-2003, 02:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •