I have,
4GB 2x2G CMX4GX3M2A1600C9 XMP
Motherboard: ASUS M4A79XTD EVO MOBO
Cpu: AMD PHENOM2 X4 965 AM3 BLK 125
http://i54.tinypic.com/ioi3bk.jpg
http://i51.tinypic.com/wvbseq.jpg
I have,
4GB 2x2G CMX4GX3M2A1600C9 XMP
Motherboard: ASUS M4A79XTD EVO MOBO
Cpu: AMD PHENOM2 X4 965 AM3 BLK 125
http://i54.tinypic.com/ioi3bk.jpg
http://i51.tinypic.com/wvbseq.jpg
anyone please ? i just need to know what to set the timmings to if there wrong. please help
I would say you could tighten your timings as they are set to auto. Your ram is running a little more slowly than it could but should be fine as long as the voltage is not too high.
Read this from this page. Should provide your specs which you can enter in your bios. The anacronyms will tally over into your bios. if unsure leave to auto. (I could not open the pdf so it may not be helpful).
There could be more info on the corsair page.
CPU-z is very useful to check your timings and PC stuff in general in windows. Wikipedia with all the links for details on how memory works for further readings.
If your running at spec you can up the voltage for the next step up in speed, however Ram speed does not give a noticeable increase, and running the ram out of spec may mean you'll need more if they burn out.
I'll would check the timings on the sticks and match them in the bios
The timings and the rated voltage are printed on the side of the module. Set the voltage manually and set the rated timings as shown in the 2nd picture you posted above. 11-11-11-29 should be 9-9-9-24. Leave everrything else as is.
Also, you aren't going to "burn" anything at the rated voltage. Don't go above this voltage and you have no worries.
thanks for the replys,
ok i see that its 9-9-9-24 and voltage 1.65
but my motherboard go's in 2's so i can either get 1.64 or 1.66 not 1.65 .. so go with 1.64 ?
also what ones do i change to make it 9-9-9-24 not changed them before.
sorry not really made myself clear
i know what settings to change it to but in that picture it shows a list of TWR - TWT etc , which ones do i change from auto to 9 etc
thanks for the help
bump
What are you bumping?
http://forums.hexus.net/2042352-post5.html
lol i am also confused ?
ok my settings are currently 11-11-11-29 ok ?
you are saying i am wanting 9-9-9-24 ?
i am asking what i need to change in the timings page to get this to 9-9-9-24
TCL - AUTO
TRCD - AUTO
TRP - AUTO
TRAS - AUTO
TRTP - AUTO
TRC - AUTO
TWR - AUTO
TRRD - AUTO
is it these i need to change from Auto to something to get 9-9-9-24 ? if so could you tell me what i am changing please ?
this is what i am stuck at.
TCL - 9
TCRD - 9
TRP - 9
TRAS - 24
Is that correct ?
then change voltage to 1.66
Have you read your manual where it explains the settings shown in the picture above? All of this is covered in the manual and details how to make these changes on your motherboard.
Again, in your picture, 11-11-11-29-6-41-12-6 corresponds to that list of memory timing properties shown just below it.
TCL - AUTO
TRCD - AUTO
TRP - AUTO
TRAS - AUTO
TRTP - AUTO
TRC - AUTO
TWR - AUTO
TRRD - AUTO
got it now thanks
There are currently 1 users browsing this thread. (0 members and 1 guests)