Which is better for i7 2700k on a z68 board?
Printable View
Which is better for i7 2700k on a z68 board?
Both will perform equally well. Typically the Dominators will have better overhead for OCing but of course, that is not guaranteed. The Dominator also allows for more customizations of fins, cooling, add ons like the LED readout, etc.
I personally have the Dominators in, mainly for the overheads but either would be good!
Dominators carry quite a price premium here in the UK. Very few applications record SIGNIFICANT performance gains in real world applications to warrant using the higher speed, and cost, dominators. I'd personally recommend the Vengence series on that price/performance basis.Quote:
Originally Posted by Macphisto
The most performance gain you will achieve from a 2700k is by overclocking the multiplier on the CPU.
I'd say go with the vengeance LP variants, get 1600 MHz and then stick them in and load up the XMP settings.
This way your not having the issue with larger CPU coolers fouling on the memory and in all honesty looking at the charts on anandtech, going for memory faster than 1600 MHz doesn't give enough of a performance gain to warrant the extra costs involved with the faster RAM.
+1Quote:
Originally Posted by Lee @ SCAN
Also the Vengeance Arctic White stuff is good as it has a lower 1.35v XMP voltage.
This means the memory can be quite versatile should you wish to dabble in overclocking the memory.
I was looking at getting the vengeance 1600Mhz at 1.5v, this is better than the 1.35v isn't it? Would overclocking the 1.35v be any better for me than just getting the 1.5v. Or is it just overclocking for fun?
Me too. Personally, I reckon the extra stuff offered by the Dominators is just frippery.Quote:
Originally Posted by Tattysnuc
I opted for the Vengeance myself, because of price difference and not much difference in performance in real world.
vengeance with tall sinks might clash with your cpu cooler. what happend in my case, had to saw top of it off.. :D
correct me if i am wrong but on dominator you can just slide top bit out
I have a x79 board sitting here but I'm still confuse which quad channel kit should I buy?any suggestion?
op im in the same situation as you. Im leaning towards vengance LP purely as they are 1.5v vs 1.65v on the dominators.
Im looking at the LP varient as i have heard tell of the full profile heatsink on the vengance being more cosmetic than usefull and as has been mentioned getting in the way of cpu coolers.
Vengeance due to the price.
Vengeance have a much better 'bang-for-buck' than the Dominators so it really depends on why you are building your PC and what you plan to use it for!
Personally I have had both and prefer the Dominator GT as with black extender fins they look pretty badass through the side window, however my PC build is more a question of what looks good than economy.
The vengeance kits are very good value and still of some deal of over-clockability...so, I would say, if budget is not a factor, go with the Dominators, otherwise Vengeance are going to do the job perfectly well. Also, if you are building a gaming PC, there's little point in having anything over 1600 MHz memory speed as it will do very little to improve your FPS!
Cheers, krs
The Dominators too look far nice though :P
Dominators are probably better for overclocking but I would recommend going for Vengeance as it is better value for money.
I've got Vengeance in two different PCs and both have been pretty good with my overclocks, and way cheaper too :p
+ 1 Vengence RAM is good bang for buck and excellent ram kits!
Dominators really arent worth it
For me Vengeance due to the price :D
About the OC, Hexus has got a review of these memory modules but they didn't had much luck with successful overclocking - http://hexus.net/tech/reviews/ram/31...memory/?page=2Quote:
Originally Posted by Mark@SCAN
Never the less I would still buy them for a right price, they look COOL (and white=cold and cool as stylish) ... :)
Vengeance due to initial cost and the low profile, least you don't have to choose your cooler to accommodate your modules.
Will vengeance down clock it's speed to suit the motherboard?
Assuming that you're asking DDR3, yes, all the way down to 1333MhzQuote:
Originally Posted by Bone9
Post your MB's make and model so we can provide a more accurate answer :)
Hi, no sorry i'm talking about ddr4 ram. This is my board...Quote:
Originally Posted by Greybeard
http://www.gigabyte.com/products/pro...px?pid=5639#ov
For some reason, that link is not showing anything.
Hi ended up going for this in the end...Quote:
Originally Posted by Greybeard
https://www.asus.com/uk/Motherboards...ING-WIFI-AURA/
That's a sleek looking board... especially the LED effect. That feature will go well with our RGB peripherals ;)
Thanks, this is for a htpc so just a wireless keyboard/mouse (logitech k400 plus) for the lounge.
My gaming rig has a Strafe rgb and a m65 rgb ;)
Just got some of the new Vengeance Red LED memory for my new build. Looks amazing! Highly recommended.
I got the Vengeance Red LED, and they are great, i think that dominator are overprice.
Vengeance always...
Sounds like the Vengeance LED kits are becoming to be the favorite. I'm glad to that you guys are happy with it :)