Results 1 to 9 of 9

Thread: CPU replacement for home server

  1. #1
    aka .:iGi:. Calcutter DannyM's Avatar
    Join Date
    Feb 2007
    Location
    Location Location!
    Posts
    915
    Thanks
    111
    Thanked
    125 times in 97 posts
    • DannyM's system
      • Motherboard:
      • Gigabyte Z68MA-D2H-B3
      • CPU:
      • Intel Core i5-2400
      • Memory:
      • 8GB Corsair Vengeance DDR3 - PC-12800
      • Storage:
      • 120GB A-Data SSD
      • Graphics card(s):
      • 1GB Nvidia ASUS 560Ti DirectuII
      • PSU:
      • Corsair 620W HX Modular PSU
      • Case:
      • Fractal Design Define Mini
      • Operating System:
      • Windows 7 Pro 64bit
      • Monitor(s):
      • 23" Dell UltraSharp U2311H
      • Internet:
      • 50Mb Virgin Media Cable Broadband

    CPU replacement for home server

    I've currently got a Intel Celeron Processor E3300 in a home server that's serving files and running some web services, it also does some transcoding, but the CPU isn't all that and I'm wanting something with a bit more umph to handle it's duties better.

    I'm considering getting an Xeon prcessor, I've seen a Xeon 5150 on eBay going cheap. It has the same TDP as the celeron so I imagine power consumption would be OK.

    I'm after socket 775.

    Any ideas if it would be a worthy upgrade if not, can anyone advise me? I'd like it to have a low TDP.

    Thanks.

  2. #2
    Moosing about! CAT-THE-FIFTH's Avatar
    Join Date
    Aug 2006
    Location
    Not here
    Posts
    31,619
    Thanks
    3,755
    Thanked
    5,059 times in 3,911 posts
    • CAT-THE-FIFTH's system
      • Motherboard:
      • Less E-PEEN
      • CPU:
      • Massive E-PEEN
      • Memory:
      • RGB E-PEEN
      • Storage:
      • Not in any order
      • Graphics card(s):
      • EVEN BIGGER E-PEEN
      • PSU:
      • OVERSIZED
      • Case:
      • UNDERSIZED
      • Operating System:
      • DOS 6.22
      • Monitor(s):
      • NOT USUALLY ON....WHEN I POST
      • Internet:
      • FUNCTIONAL

    Re: CPU replacement for home server

    Linux= get Nvidia.

    If not I would consider getting an AMD card. An OpenCL version of HandBrake has been demoed,so over the next year there should hopefully be a release.

  3. #3
    aka .:iGi:. Calcutter DannyM's Avatar
    Join Date
    Feb 2007
    Location
    Location Location!
    Posts
    915
    Thanks
    111
    Thanked
    125 times in 97 posts
    • DannyM's system
      • Motherboard:
      • Gigabyte Z68MA-D2H-B3
      • CPU:
      • Intel Core i5-2400
      • Memory:
      • 8GB Corsair Vengeance DDR3 - PC-12800
      • Storage:
      • 120GB A-Data SSD
      • Graphics card(s):
      • 1GB Nvidia ASUS 560Ti DirectuII
      • PSU:
      • Corsair 620W HX Modular PSU
      • Case:
      • Fractal Design Define Mini
      • Operating System:
      • Windows 7 Pro 64bit
      • Monitor(s):
      • 23" Dell UltraSharp U2311H
      • Internet:
      • 50Mb Virgin Media Cable Broadband

    Re: CPU replacement for home server

    Quote Originally Posted by CAT-THE-FIFTH View Post
    Linux= get Nvidia.

    If not I would consider getting an AMD card. An OpenCL version of HandBrake has been demoed,so over the next year there should hopefully be a release.
    Errrr...?

  4. #4
    Moosing about! CAT-THE-FIFTH's Avatar
    Join Date
    Aug 2006
    Location
    Not here
    Posts
    31,619
    Thanks
    3,755
    Thanked
    5,059 times in 3,911 posts
    • CAT-THE-FIFTH's system
      • Motherboard:
      • Less E-PEEN
      • CPU:
      • Massive E-PEEN
      • Memory:
      • RGB E-PEEN
      • Storage:
      • Not in any order
      • Graphics card(s):
      • EVEN BIGGER E-PEEN
      • PSU:
      • OVERSIZED
      • Case:
      • UNDERSIZED
      • Operating System:
      • DOS 6.22
      • Monitor(s):
      • NOT USUALLY ON....WHEN I POST
      • Internet:
      • FUNCTIONAL

    Re: CPU replacement for home server

    Quote Originally Posted by DannyM View Post
    Errrr...?
    I read it as GPU,not CPU!!

    However,I would read up on the OpenCL acceleration of HandBrake:

    http://www.anandtech.com/show/5835/t...ds-trinity-apu

  5. #5
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,334
    Thanks
    714
    Thanked
    1,406 times in 1,188 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 3700X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 1TB Linux, 1TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 33 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 80Mb/20Mb VDSL

    Re: CPU replacement for home server

    What is it struggling with, the transcoding?
    I would have thought that dual core 2.5GHz would be enough for the file & web serving duties.

    What OS are you using? I found under Linux going from 32 to 64 bit made a massive difference to mplayer transcoding speed.

    From a quick google it looks like that xeon gives you a small bump in frequency and bus speed so I can't imagine it would help much

  6. #6
    Not a good person scaryjim's Avatar
    Join Date
    Jan 2009
    Location
    Gateshead
    Posts
    15,196
    Thanks
    1,230
    Thanked
    2,291 times in 1,874 posts
    • scaryjim's system
      • Motherboard:
      • Dell Inspiron
      • CPU:
      • Core i5 8250U
      • Memory:
      • 2x 4GB DDR4 2666
      • Storage:
      • 128GB M.2 SSD + 1TB HDD
      • Graphics card(s):
      • Radeon R5 230
      • PSU:
      • Battery/Dell brick
      • Case:
      • Dell Inspiron 5570
      • Operating System:
      • Windows 10
      • Monitor(s):
      • 15" 1080p laptop panel

    Re: CPU replacement for home server

    It also gives you a much bigger dollop of L2 cache, so it might help more than you would otherwise expect - IIRC from the handbrake chart it took a Pentium Dual core @ 3.5GHz to overtake an E8400, so the extra clocks, bus speed *and* cache might combine to give a reasonable bump.

    BUT

    Whilst the Celly 3300 has a rated TDP of 65W, it's generally reckoned to draw a lot less power than that, whereas the Xeon will likely pull very close to its TDP limit (the extra clocks and cache will be power hungry). So if you did upgrade I'd expect your energy bills to go up too.

    I don't think there's a s775 processor that will be significantly faster than your 3300 without drawing more power, tbh. There are newer processors with lower TDPs that would almost certainly give you better performance with lower power draw, but then you're looking at a replacement, not an upgrade, I'm afraid...

  7. #7
    aka .:iGi:. Calcutter DannyM's Avatar
    Join Date
    Feb 2007
    Location
    Location Location!
    Posts
    915
    Thanks
    111
    Thanked
    125 times in 97 posts
    • DannyM's system
      • Motherboard:
      • Gigabyte Z68MA-D2H-B3
      • CPU:
      • Intel Core i5-2400
      • Memory:
      • 8GB Corsair Vengeance DDR3 - PC-12800
      • Storage:
      • 120GB A-Data SSD
      • Graphics card(s):
      • 1GB Nvidia ASUS 560Ti DirectuII
      • PSU:
      • Corsair 620W HX Modular PSU
      • Case:
      • Fractal Design Define Mini
      • Operating System:
      • Windows 7 Pro 64bit
      • Monitor(s):
      • 23" Dell UltraSharp U2311H
      • Internet:
      • 50Mb Virgin Media Cable Broadband

    Re: CPU replacement for home server

    Interesting, I am currently using Windows Server 2008, partially out of laziness, I set it up a while back for some uni related work and it's been in place ever since.

    I've recently been considering Debian, or Ubuntu purely because of the support behind it. However I'd need a day or two to sort that out properly.

    I think it would seem to be the better option would be to got for a more resource friendly OS. I'm just not up for the terminal work at the mo, it's been a while since I last played with it.

    I've been using PS3 media server for DLNA and it seems to not play well when transcoding files to the PS3/Xbox and I can only pinpoint the CPU.

  8. #8
    HEXUS.timelord. Zak33's Avatar
    Join Date
    Jul 2003
    Location
    I'm a Jessie
    Posts
    35,157
    Thanks
    3,105
    Thanked
    3,138 times in 1,916 posts
    • Zak33's system
      • Storage:
      • Kingston HyperX SSD, Hitachi 1Tb
      • Graphics card(s):
      • Nvidia 1050
      • PSU:
      • Coolermaster 800w
      • Case:
      • Silverstone Fortress FT01
      • Operating System:
      • Win10
      • Internet:
      • Zen FTC uber speedy

    Re: CPU replacement for home server

    Danny .. lo dude.. you sure it's a CPU limit?

    Plenty of ram in it?

    Quote Originally Posted by Advice Trinity by Knoxville
    "The second you aren't paying attention to the tool you're using, it will take your fingers from you. It does not know sympathy." |
    "If you don't gaffer it, it will gaffer you" | "Belt and braces"

  9. #9
    aka .:iGi:. Calcutter DannyM's Avatar
    Join Date
    Feb 2007
    Location
    Location Location!
    Posts
    915
    Thanks
    111
    Thanked
    125 times in 97 posts
    • DannyM's system
      • Motherboard:
      • Gigabyte Z68MA-D2H-B3
      • CPU:
      • Intel Core i5-2400
      • Memory:
      • 8GB Corsair Vengeance DDR3 - PC-12800
      • Storage:
      • 120GB A-Data SSD
      • Graphics card(s):
      • 1GB Nvidia ASUS 560Ti DirectuII
      • PSU:
      • Corsair 620W HX Modular PSU
      • Case:
      • Fractal Design Define Mini
      • Operating System:
      • Windows 7 Pro 64bit
      • Monitor(s):
      • 23" Dell UltraSharp U2311H
      • Internet:
      • 50Mb Virgin Media Cable Broadband

    Re: CPU replacement for home server

    4GB RAM sitting in it at the moment. I may have to do a bit more monitoring to see what is the cause, but as stated, I just believe the CPU hasn't got enough umph.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •