2x2 studs 8 feet long

[jetfire]

do they cut wood in this size in the uk as i cant find any, best i can find is this but its to big.

http://www.diy.com/diy/jsp/bq/nav.js...isSearch=false

i need it to be 38mm x 38mm according to this.

http://en.wikipedia.org/wiki/Lumber

i want to make one of these if i can get the right size wood.

http://www.pmerecords.com/Diffusor.cfm

[Flibb]

Look for a local timber merchant, or my local B&Q cuts to length

[jetfire]

I'm going to go down baq tomorrow with my tape measure and see if they have anything that is the right size.

length is not a problem tho but it needs to be 38mm h x 38mm w 8 feet long and i need seven of them.

[TAKTAK]

Have a look for 1.1/2" instead...

[Tumble]

If it's 2x2" you're after - then you need to either ask for that at the timber merchants (they'll give you the right size) or 50x50mm (1" = 25.4mm). If you get PAR (Planed All Round) it'll be nice and smooth too, not rough cut. The standard length for a bit of timber these days is 4 metres (roughly 13') but you can get them cut to size, or cut them down yourself.