Hi just installed new powercolor HD6850 card but seems the benchmark score on pcmark7 is only 1095! Whereas the majority of these cards with same cpu and mobo (sig below) are in the region of 2500 upto 4222. Any ideas why this could be ps?
Hi just installed new powercolor HD6850 card but seems the benchmark score on pcmark7 is only 1095! Whereas the majority of these cards with same cpu and mobo (sig below) are in the region of 2500 upto 4222. Any ideas why this could be ps?
Last edited by wannabgeek; 08-02-2012 at 03:41 PM.
Windows 7 64 Ultimate
AMD x6 1055T Phenom @3.3ghz
Asus M4A89GTD-Pro-USB3
HD 6850 1GB GDDR5
4GB Corsair XMS3 (2x2GB)
Tx 650w Corsair PSU
250GB Samsung Spinpoint Sata HD
200GB Maxtor Dmax10 IDE
LG Sata2 DVD/RW
Lancool K62 Case
Have a look at the core clock / memory clock on your screen-shot - 100Mhz / 150MHz!! For some reason the card isn't coming out of idle state when you run the program (unless that reading is wrong, of course...). Check your power settings, control centre settings etc. to see why it's remaining in idle clocks for 3D loads... Also download a monitoring programme (not sure what works on Radeon cards, but I've used MSI Afterburner to monitor an ASUS 8800GTX before!) to check the speeds and load put on the card whilst the test is running...
Last edited by wannabgeek; 08-02-2012 at 04:02 PM.
Windows 7 64 Ultimate
AMD x6 1055T Phenom @3.3ghz
Asus M4A89GTD-Pro-USB3
HD 6850 1GB GDDR5
4GB Corsair XMS3 (2x2GB)
Tx 650w Corsair PSU
250GB Samsung Spinpoint Sata HD
200GB Maxtor Dmax10 IDE
LG Sata2 DVD/RW
Lancool K62 Case
Still poor, 3dmark is giving me p3405 where as the lowest results with same system is over 4000. Also the core/memory clock scores are the same as before. Ive also checked power settings and they are on high performance! Could it be something in the bios? I have a asus board. Thanks
[IMG] By wannabgeek at 2012-02-08[/IMG]
[IMG] By wannabgeek at 2012-02-08[/IMG]
Windows 7 64 Ultimate
AMD x6 1055T Phenom @3.3ghz
Asus M4A89GTD-Pro-USB3
HD 6850 1GB GDDR5
4GB Corsair XMS3 (2x2GB)
Tx 650w Corsair PSU
250GB Samsung Spinpoint Sata HD
200GB Maxtor Dmax10 IDE
LG Sata2 DVD/RW
Lancool K62 Case
Are the other systems running at the same speed? Quite often people crank up the mhz.
Drivers?
Virus checker?
Is it your card and do they segment card vs GPU. are these lower.
I assume this is the updaet of 3dmark11?
Thanks for the help. I think you maybe right, looking at other results the core/mem clocks are at 0mhz (mine was 100/150mhz on each tests) I Just had a quick game of deus ex on ultra settings which stutter a bit but ATI tray tools is showing core/memory clocks @750/1000 and FPS at 62 so does this seem ok to you?
ps note: The result page are also saying my newest ATI 12.1 drivers are unsupported which may be the cause of low score/s.
Last edited by wannabgeek; 08-02-2012 at 06:01 PM.
Windows 7 64 Ultimate
AMD x6 1055T Phenom @3.3ghz
Asus M4A89GTD-Pro-USB3
HD 6850 1GB GDDR5
4GB Corsair XMS3 (2x2GB)
Tx 650w Corsair PSU
250GB Samsung Spinpoint Sata HD
200GB Maxtor Dmax10 IDE
LG Sata2 DVD/RW
Lancool K62 Case
There are currently 1 users browsing this thread. (0 members and 1 guests)