When I boot my recently built PC (A8V/3200+/2x512MB/7600GS) it fails to recognise the SATA HD and DVD drives - after a reset, it finds them
Is this a common problem, ie. easily rectifyable?
Cheers
Printable View
When I boot my recently built PC (A8V/3200+/2x512MB/7600GS) it fails to recognise the SATA HD and DVD drives - after a reset, it finds them
Is this a common problem, ie. easily rectifyable?
Cheers
I've had this a few times - I just put the sata drives higher up the boot order and it fixed it for me. Try playing about with your various BIOS options.
The HD is 1st, I'll check what the DVD drive is set to
cheers
I was having this problem with my DVD burner for a while, turns out it failed shortly after so I put it down to that. Could also be a PSU struggling to supply everything thats connected, you get any other odd problems, random reboots, artifacts in games etc?
no other problems - the drives are new and seem to work fine after a reboot - ran HL2 and all seems very well
PSU is a new Tagan 380W
Hmm, doesnt sound like a powerful PSU, I know the tagan stuff is good but you *could* be cutting it awful fine if you have multiple sata drives and dvd drives along with the 7600. Maybe see if you can borrow a more powerful PSU from someone the check.
I'm not certain on the power draws from those components, its just I wouldnt be comfortable using a 380w for those components.
I have:
Asus A8V
AMD64 S939 3200+
320GB SATA HDD
SATA DVD Writer
7600GS AGP
2x512MB PC3200
1x120mm Fan
...all with no overclocking
380W is enough by a long shot
Yeh the PSU should be fine though it would be a question of whether it is faulty or not if you where to question the PSU. I wouldn't suspect the PSU to be honest.
You don't have anything in your BIOS set to have RAID enabled do you?
Also are you running the latest BIOS version?
ah - latest BIOS... never done that before :)
/me goes to Asus website
I had that with a similar sort of board. In the BIOS I set the HD to SCSSI and it worked!Quote:
Originally Posted by k0nigen
Peter.
Its worth checking your sata cables, they're a bit grumpy sometimes !! The lockable ones are good !! :undecided
I'll try Giraffe's suggestion, although I don't think I saw anywhere to select the SATA drive types...
The cables are the lockable type, and they do work - just not on the first boot
I've updated the BIOS - no change
Also: there's no option to select type of device on SATA ports
I'm puzzled...
I'll join you in puzzlement, unless its just a general problem with those boards I cant think of any other reasonable explanation for it to do that.
If there is a "HDD Spin up delay" option in your BIOS, try setting it to something like 5 secs.
Have you checked the drive to see if it's healthy? Sounds like the drives not spinning up on time. On SCSI drives there used to be jumper to delay startup so might be worth checking the drive for this, also is the drive SATA2 and what is the mobo capable of, if only SATA1 and there's a jumper to bring it down to SATA1 it might be worth trying that.