Results 1 to 8 of 8

Thread: Cooling parts and fan selection. [urgent]

  1. #1
    Registered+
    Join Date
    Jun 2008
    Posts
    44
    Thanks
    0
    Thanked
    0 times in 0 posts

    Cooling parts and fan selection. [urgent]

    Friends, i am going to order following items from India. bcoz its cheap there and 1 of my indian friend will be bringing for me from India, so its free of shipping charges.

    i need your final and explained comments for following items:
    http://www.primeabgb.com/index.php?p...mart&Itemid=28


    http://www.primeabgb.com/index.php?p...mart&Itemid=28


    (want to know if CPU & GPU cooler (packing) comes with all required items for installation and i don't need to get anything additional.... please help me here bcoz its very important... incase i brought these and something is missing for installation then these coolers might be useless untill i get the rest)


    http://www.primeabgb.com/index.php?p...mart&Itemid=28


    and here i need your help to select proper fan for CPU GPU and for additional air flow. (Note: only these are the 120mm fan available from this site and no other source to get any other fan from others)

    http://www.primeabgb.com/index.php?p...mart&Itemid=28


    http://www.primeabgb.com/index.php?p...mart&Itemid=28


    http://www.primeabgb.com/index.php?p...mart&Itemid=28


    whatever fan you suggest, please give full name of that fan...


    all your help/support and comments will really help me alot and will satisfy to buy these items without any risk.

    my cpu is Q6600 G0 Intel
    and my GPU is XFX 8800GT 512MB
    power supply is toughtpower 750Watt
    casing is ThermalTake Armor
    and mother board is ASUS P5Q

    note at this moment everything is running with stocked items and no changes were made anywhere ... i mean OC etc

    thanks and waiting for all your quick response... all members pls share your experience here.

    thanks again.

  2. #2
    Folding Flunkie Webby's Avatar
    Join Date
    Sep 2007
    Location
    Wiltshire
    Posts
    2,323
    Thanks
    12
    Thanked
    245 times in 229 posts
    • Webby's system
      • Motherboard:
      • Gigabyte G33M-DS2R, Swiftech MCW30 Northbridge Cooler
      • CPU:
      • Intel Core 2 Duo E6550 @ 3.5GHz, Cooling D-Tek Fuzion V2
      • Memory:
      • 2GB OCZ Flex DDR2 PC2-9200 5-5-5-15 @ 1000MHz 4-4-4-12
      • Storage:
      • 2x 250GB WD SataII
      • Graphics card(s):
      • Sapphire HD4870 512MB, Cooling Swiftech MCW60
      • PSU:
      • Corsair HX520w
      • Case:
      • Silverstone Tremjin TJ06 - Modded for Water Cooling Goodness
      • Operating System:
      • Windows XP Pro SP3
      • Monitor(s):
      • 22" Widescreen Cibox C2201 (with DVI input)
      • Internet:
      • 8Mb/s ADSL

    Re: Cooling parts and fan selection. [urgent]

    As to the first set of questions the coolers come with all the required parts for installation and AS5 is a reasonable thermal paste, you can probably get better but then again every test I have seen for thermal pastes has them all in different orders the differences are that small.

    And Fan wise I would go with these instead you may need a fan controller if you want to turn them down a bit but they really are quite quiet.

    http://www.primeabgb.com/index.php?p...mart&Itemid=28

  3. #3
    Registered+
    Join Date
    Jun 2008
    Posts
    44
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Cooling parts and fan selection. [urgent]

    ok... and what about installation parts for the coolers... is all required parts are coming along with cooler's packing and do i need to get some additionals...

  4. #4
    Registered+
    Join Date
    Jun 2008
    Posts
    44
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Cooling parts and fan selection. [urgent]

    Quote Originally Posted by Webby View Post
    As to the first set of questions the coolers come with all the required parts for installation and AS5 is a reasonable thermal paste, you can probably get better but then again every test I have seen for thermal pastes has them all in different orders the differences are that small.

    And Fan wise I would go with these instead you may need a fan controller if you want to turn them down a bit but they really are quite quiet.

    http://www.primeabgb.com/index.php?p...mart&Itemid=28


    and BTW fan u have mentioned to get,,, is this fan ok for cpu heat sink (ultra 120 extreme)

    and do you think i can use 120mm fan for gpu cooler (hr-03 gt)

  5. #5
    NOT Banned
    Join Date
    Jan 2007
    Posts
    5,905
    Thanks
    412
    Thanked
    278 times in 253 posts

    Re: Cooling parts and fan selection. [urgent]

    Quote Originally Posted by mwvirk View Post
    ok... and what about installation parts for the coolers... is all required parts are coming along with cooler's packing and do i need to get some additionals...
    everything usually comes with the thermalrights except for the fans.

    Quote Originally Posted by mwvirk View Post
    and BTW fan u have mentioned to get,,, is this fan ok for cpu heat sink (ultra 120 extreme)

    and do you think i can use 120mm fan for gpu cooler (hr-03 gt)
    The 120mm Scythe Fan will go on the Thermalright Ultra just fine but for the HR-03 GT you will need a 92mm or smaller instead as the 120mm is too big. (So the page says)

  6. #6
    Registered+
    Join Date
    Jun 2008
    Posts
    44
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Cooling parts and fan selection. [urgent]

    friends, let me explain 1 more thing here:
    my current computer temp. on Q6600 is 42C 41C 42C 44C with average 44C on idle and with full load its around 58C average. where gpu is 60C idle and while playing crysis it goes around 82

    i am dead sure with little proper air flow will help me to reduce some temp but i still thinking of buying these cooler as well as find out some way to get proper air flow, even by installing 2 or 3 extra fan.

    what you will suggest. is it ok and i should go for these coolers. because i am getting it very cheap. ultra 120 around 60US$ or hr-03 gt around 55US$

    but good thing is no shipping charges.

    need you comments on it. thanks.

  7. #7
    NOT Banned
    Join Date
    Jan 2007
    Posts
    5,905
    Thanks
    412
    Thanked
    278 times in 253 posts

    Re: Cooling parts and fan selection. [urgent]

    the ultra will definately lower your temps and for the gfx card cooler that will help reduce it too. I haven't read reviews on the hr-03 gt but I know the Ultra is a good cooler.

  8. #8
    Registered+
    Join Date
    Jun 2008
    Posts
    44
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Cooling parts and fan selection. [urgent]

    thanks for your valueable comments.

    i am really not in a mood for overclocking at all..

    now tell me what should i do...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Antec300 - Fan based cooling advice
    By richieuk in forum PC Hardware and Components
    Replies: 10
    Last Post: 04-08-2008, 06:52 PM
  2. Fan Directions & Optimisation
    By shkm in forum PC Hardware and Components
    Replies: 20
    Last Post: 12-01-2008, 02:16 PM
  3. Laptop fan problems continue, homemade moving parts lubricant?
    By Marcos in forum PC Hardware and Components
    Replies: 13
    Last Post: 17-04-2005, 04:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •