"Ç" error during BIOS POST?
Hi,
I can't quite remember at what point the following started occurring, it may have been when I added another 1TB drive to my rig, but this is what is happening:
From a cold boot, as the BIOS starts up to post, it comes to my 150GB Velociraptor drive, and pauses before displaying a Ç sign next to the drive as shown in the photo here:
Ahh ok so I can't post a photo yet, can I post a broken url?
ht t p://img.photobucket.com/albums/v335/emjayhaych/booterror.jpg
For the life of me I can't find any information about what this could mean on google, and I'm usually happy to muddle through forums for hours looking for answers before I ask for help myself.
What makes it stranger is that if I then hit the reset button, it'll go through POST without a hitch as if nothing was ever wrong, and boot into Windows (7 Ultimate RTM) just fine. I can restart as often as I want and I never get it again, it only happens after the pc's been switched off.
Anybody familiar with this? I can give any details of my setup needed, basics are:
Gigabyte GA-E7AUM-DS2H motherboard
Core 2 Duo E6750
WD Velociraptor 150GB
WD GreenPower 2TB x 2
DVD-RW
600W PSU (yeah probably overkill)
(Until very recently I had more drives in my system - 4x 1TB plus the Velociraptor, and because two of the mobo's sata ports are AHCI only and wouldn't play nice with my hdd's, I installed a PCIe SATA Raid card to handle one of the drives. I figured the above error was maybe to do with that, but now I've replaced them with the 2TB's so I've removed that PCIe RAID card and they're all connected to the onboard SATA's, and still the strangeness continues)
Thanks for any help anyone can give!
It's not urgent as the reboot solves it, but it's bugging me :mad:
Re: "Ç" error during BIOS POST?
Re: "Ç" error during BIOS POST?
http://img.photobucket.com/albums/v3.../booterror.jpg
(img for lazy peeps)
Hmm, i was going to suggest trying different SATA ports, but you already have...
Do you have a case speaker hooked up, if so are you getting any beep codes? or does the board have an on-board LED readout?
Re: "Ç" error during BIOS POST?
Yeah I have a case speaker hooked up, but no ominous beeps happen, I just get the usual one short POST beep a few seconds after powering up, and then it scans for hard drives and just silently stops on the above screen. My board has an LED readout too, and nothing shows up there.
And yep I have tried different SATA ports to no avail. It almost seems as if the system/OS hard drive isn't receiving enough power soon enough upon powering up...Given that the system always boots fine upon pressing the reboot button...:O_o1: but that theory seems a bit silly.
I've run a health check on my Velociraptor too, and it seems to be in fine working order.
I'm just puzzled as to the meaning of the "cedilla" sign appearing...It's impossible to google it, nothing relevant comes up no matter what terms I try
Re: "Ç" error during BIOS POST?
Quote:
Originally Posted by
tranquillian
Yeah I have a case speaker hooked up, but no ominous beeps happen, I just get the usual one short POST beep a few seconds after powering up, and then it scans for hard drives and just silently stops on the above screen. My board has an LED readout too, and nothing shows up there.
And yep I have tried different SATA ports to no avail. It almost seems as if the system/OS hard drive isn't receiving enough power soon enough upon powering up...Given that the system always boots fine upon pressing the reboot button...:O_o1: but that theory seems a bit silly.
I've run a health check on my Velociraptor too, and it seems to be in fine working order.
I'm just puzzled as to the meaning of the "cedilla" sign appearing...It's impossible to google it, nothing relevant comes up no matter what terms I try
that theory is spot on mate not silly the psu will do just
that try unplugging all hard drives other than the os disc and unplug dvd drive power plus all case fans and see if the problem gos away
Re: "Ç" error during BIOS POST?
I had a similar(ish) problem a long time ago when I installed a second hard drive on a PC. The second drive would never be located on a cold boot but was OK on a reboot. In my case it was definitely a power issue so you could well be on the right track.
Re: "Ç" error during BIOS POST?
Ok, I'll try that next time my PC's off and see what happens, but say if it does, what's the solution for this? It's not like it's a cheap nasty basic PSU I've got, it's a XILENCE 600w Smart Fanless PSU, and seems in perfect health, surely with my system consisting of:
S775 mobo with onboard 9400 graphics
Velociraptor HDD on SATA 1 port
2x 2TB WD GreenPower HDD's on SATA 2 and 3
Asus Xonar D2 PCI soundcard
2 case fans
Surely a 600w quality PSU should have no trouble catering for that...What would my other option be?
Anyway, cheers, I'll see what happens
Re: "Ç" error during BIOS POST?
it depends on if the 12v and 5v rails have enough power it sounds to me like the 12v rail hasn't enough amps to spin up the discs ,when rebooting it takes less juice for things to work correctly
you might well need a new psu with higher amps on the rails
if your psu has more than one 12v rail you can try spreading the load between them its possible you have all/most on one rail