Results 1 to 5 of 5

Thread: Disabling "Error! CPU Fan not connected"

  1. #1
    Hardcore Til I Die htid's Avatar
    Join Date
    Mar 2006
    Location
    London
    Posts
    1,802
    Thanks
    81
    Thanked
    32 times in 22 posts
    • htid's system
      • Motherboard:
      • Asus P5B
      • CPU:
      • C2D E6600 @ 3ghz
      • Memory:
      • 2gb Corsair XMS2
      • Storage:
      • 180gb Spinpoint
      • Graphics card(s):
      • XFX 7900GTX
      • PSU:
      • 500W Seasonic S12
      • Case:
      • Akasa Mirage
      • Monitor(s):
      • 18" Dell

    Disabling "Error! CPU Fan not connected"

    Have connected my cpu fan to my fan controller and now every time i turn on the comp it does that message and i have to press F1. Is their a way around this? Checked in the bios but i can't see anything.

    Cheers.

  2. #2
    Banned
    Join Date
    Aug 2006
    Posts
    1,022
    Thanks
    0
    Thanked
    0 times in 0 posts
    is the fan spinning?

    if so then g into the bios and put

    "halt on no errors"

    or the setting that fits the bill, as they differ somewhat
    Last edited by harry1; 20-10-2006 at 12:44 PM. Reason: why not

  3. #3
    YUKIKAZE arthurleung's Avatar
    Join Date
    Feb 2005
    Location
    Aberdeen
    Posts
    3,280
    Thanks
    8
    Thanked
    88 times in 83 posts
    • arthurleung's system
      • Motherboard:
      • Asus P5E (Rampage Formula 0902)
      • CPU:
      • Intel Core2Quad Q9550 3.6Ghz 1.2V
      • Memory:
      • A-Data DDR2-800 2x2GB CL4
      • Storage:
      • 4x1TB WD1000FYPS @ RAID5 3Ware 9500S-8 / 3x 1TB Samsung Ecogreen F2
      • Graphics card(s):
      • GeCube HD4870 512MB
      • PSU:
      • Corsair VX450
      • Case:
      • Antec P180
      • Operating System:
      • Windows Server 2008 Standard
      • Monitor(s):
      • Dell Ultrasharp 2709W + 2001FP
      • Internet:
      • Be*Unlimited 20Mbps
    Go into BIOS -> Health (usually, or hardware monitoring)
    For CPU fan, set it to disable. That should solve it.
    Workstation 1: Intel i7 950 @ 3.8Ghz / X58 / 12GB DDR3-1600 / HD4870 512MB / Antec P180
    Workstation 2: Intel C2Q Q9550 @ 3.6Ghz / X38 / 4GB DDR2-800 / 8400GS 512MB / Open Air
    Workstation 3: Intel Xeon X3350 @ 3.2Ghz / P35 / 4GB DDR2-800 / HD4770 512MB / Shuttle SP35P2
    HTPC: AMD Athlon X4 620 @ 2.6Ghz / 780G / 4GB DDR2-1000 / Antec Mini P180 White
    Mobile Workstation: Intel C2D T8300 @ 2.4Ghz / GM965 / 3GB DDR2-667 / DELL Inspiron 1525 / 6+6+9 Cell Battery

    Display (Monitor): DELL Ultrasharp 2709W + DELL Ultrasharp 2001FP
    Display (Projector): Epson TW-3500 1080p
    Speakers: Creative Megaworks THX550 5.1
    Headphones: Etymotic hf2 / Ultimate Ears Triple.fi 10 Pro

    Storage: 8x2TB Hitachi @ DELL PERC 6/i RAID6 / 13TB Non-RAID Across 12 HDDs
    Consoles: PS3 Slim 120GB / Xbox 360 Arcade 20GB / PS2

  4. #4
    Hardcore Til I Die htid's Avatar
    Join Date
    Mar 2006
    Location
    London
    Posts
    1,802
    Thanks
    81
    Thanked
    32 times in 22 posts
    • htid's system
      • Motherboard:
      • Asus P5B
      • CPU:
      • C2D E6600 @ 3ghz
      • Memory:
      • 2gb Corsair XMS2
      • Storage:
      • 180gb Spinpoint
      • Graphics card(s):
      • XFX 7900GTX
      • PSU:
      • 500W Seasonic S12
      • Case:
      • Akasa Mirage
      • Monitor(s):
      • 18" Dell
    Ah thanks mate, it was under hardware monitoring after all. Fixed now, cheers

  5. #5
    Member
    Join Date
    Sep 2005
    Location
    Minehead, Somerset.
    Posts
    197
    Thanks
    0
    Thanked
    0 times in 0 posts
    hmmm that or make sure the fan is plugged into the right connector on the motherboard.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Opinions needed on alternate fan placement ideas
    By leon in forum Chassis and Mods
    Replies: 3
    Last Post: 19-02-2004, 02:32 PM
  2. 7v modding a coolermaster LED fan?
    By dgr in forum Chassis and Mods
    Replies: 11
    Last Post: 19-09-2003, 11:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •