Results 1 to 5 of 5

Thread: News - Low-cost, open-source 3D metal printer in development

  1. #1
    HEXUS.admin
    Join Date
    Apr 2005
    Posts
    31,709
    Thanks
    0
    Thanked
    2,073 times in 719 posts

    News - Low-cost, open-source 3D metal printer in development

    Michigan Tech boffins used less than $1,500 worth of materials to construct the device.
    Read more.

  2. #2
    Cog
    Cog is offline
    Registered+
    Join Date
    Jul 2008
    Posts
    81
    Thanks
    0
    Thanked
    3 times in 3 posts

    Re: News - Low-cost, open-source 3D metal printer in development

    Interesting idea, basically FDM but with the plastic extrusion nozzle replaced by a welder.

    I seriously doubt this is ever going to amount to anything useful, the fact that molten metal isn't capable of supporting itself combined with the huge amount of energy involved here, means that no real dimensional control will ever be possible. Small improvements on the sprocket may be possible, but even the best efforts will still be lumpy and unusable.

    The best method of making an affordable metal printer would be to use the same concept of a metal wire as the feedstock instead of a powder, then replacing the welder heatsource with a stationary laser. It'd eliminate the two biggest obstacles to cheap metal printing: The need to use a powder, and the need for a system to direct a laser beam.

  3. #3
    Senior Member
    Join Date
    Jan 2009
    Posts
    342
    Thanks
    0
    Thanked
    27 times in 23 posts

    Re: News - Low-cost, open-source 3D metal printer in development

    Quote Originally Posted by Cog View Post
    the fact that molten metal isn't capable of supporting itself
    I wonder if this is totally insurmountable. With sufficient point-cooling you could use free-form-fabrication style continuous contact to form self-supporting structures (no built-in moving parts though). Or if a support material were used. A quick-drying ceramic output by a linked head might work (maybe use the welder to supply heat for quick curing?), or if the moving bed setup were replaced with a moving-head setup, sand could be used to fill out each layer by brushing to a level after each weld pass (may have some issues with cavities, unless you dusted the sand over the top then wiped down to level, but this may have sand inclusion issues in the metal).

  4. #4
    Cog
    Cog is offline
    Registered+
    Join Date
    Jul 2008
    Posts
    81
    Thanks
    0
    Thanked
    3 times in 3 posts

    Re: News - Low-cost, open-source 3D metal printer in development

    Cooling isn't the issue, it's controlling the heat input. Mig welders use an electric arc which is difficult to control with any precision, and the welding process involves a large amount of heat input which melts more of the material you're welding onto than the metal rod you're applying. On top of this the electric current has to travel through the model you're making which will add a lot of extra latent heat which will be difficult to predict and control.
    Using a laser solves all this as you simply control the energy output to melt just as much metal as you're feeding in.

    A ceramic support material is feasible, but problematic. It takes a lot of heat to harden a ceramic, and in the process you're driving off a lot of steam which can damage the metal you're printing as well as the machine itself. Sand bound with fast setting resins may work as well, but it's going to be burning away as you're applying the metal, and take it from someone who's worked in a foundry, that's not something you want to be happening in a confined space.
    But of course, if you're designed a printer that will be producing ceramic or resin-bound sand as a support structure, you can print a ceramic mould then cast metal into it afterwards.

    Loose sand may help a little but is unlikely to provide much support.

    The problem with laser sintering machines that use a powder is that the current set-ups need the laser to move, which means expensive and intricate lenses to direct the beam. When you get rid of the powder a moving bed becomes much simpler meaning a stationary laser can be used instead.

  5. #5
    Member
    Join Date
    Jun 2012
    Posts
    189
    Thanks
    1
    Thanked
    3 times in 2 posts
    • Jingee's system
      • Motherboard:
      • Gigabyte GA-Z77
      • CPU:
      • Intel i5 3570K @ 3.4Ghz
      • Memory:
      • 8GB DDR3 @ 1600Mhz
      • Storage:
      • 128Gb Sandisk Extreme + 64Gb Crucial C300 + 2.25tb HDD storage
      • Graphics card(s):
      • KFA2 nVidia GTX 670 EX OC
      • PSU:
      • 650W Corsair
      • Case:
      • Some cheap one, works well, surprisingly.
      • Operating System:
      • Windows 7 Home 64 bit
      • Monitor(s):
      • 2x Hanns-G HS233H3B @ 120hz

    Re: News - Low-cost, open-source 3D metal printer in development

    I think I'll wait 'til they create a graphite printer and print myself a Space Elevator.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •