Results 1 to 5 of 5

Thread: Intel Core i9-9900K and i7-9700K turbo clocks impress

  1. #1
    HEXUS.admin
    Join Date
    Apr 2005
    Posts
    31,709
    Thanks
    0
    Thanked
    2,073 times in 719 posts

    Intel Core i9-9900K and i7-9700K turbo clocks impress

    Intel Core i9-9900K will boost up to 4.7GHz on all eight cores according to leaked 'Intel slides'.
    Read more.

  2. #2
    Senior Member
    Join Date
    May 2014
    Posts
    2,385
    Thanks
    181
    Thanked
    304 times in 221 posts

    Re: Intel Core i9-9900K and i7-9700K turbo clocks impress

    I am curious if the TDP is aligned with that 8 core boost. I would be incredibly surprised if it could boost that high for a decent length of time and stay within that TDP.

  3. #3
    Member
    Join Date
    Aug 2017
    Posts
    100
    Thanks
    0
    Thanked
    10 times in 8 posts

    Re: Intel Core i9-9900K and i7-9700K turbo clocks impress

    ...and all you need is a enterprise-sized AC to cool it off, or a steady flow of liquid N.

  4. #4
    Registered+
    Join Date
    Aug 2017
    Posts
    76
    Thanks
    0
    Thanked
    2 times in 2 posts
    • Fury559's system
      • Motherboard:
      • GA-Z77-D3H
      • CPU:
      • 3570k 4.5ghz
      • Memory:
      • 4x4GB 1866mhz
      • Graphics card(s):
      • EVGA GTX 1070 FTW
      • PSU:
      • EVGA P2 1000w
      • Case:
      • Fractal Design Define R4
      • Operating System:
      • W10 64 Bit
      • Monitor(s):
      • XF270HU

    Re: Intel Core i9-9900K and i7-9700K turbo clocks impress

    What kind of cooling is going to be needed for this? They might be the best chips to get for the next 5 years but I don't want a nuke cooking me, lets see what AMD bring with Zen2.

  5. #5
    Registered User
    Join Date
    May 2014
    Posts
    10
    Thanks
    0
    Thanked
    0 times in 0 posts
    @Tabbykatze: The Intel TDP is always for a heavy multi-threaded workload at base-clock. So the answer is no.
    If you compare the i7 8700K and i7 8700 they have just about the same turbo clocks but the TDP value differ by 30 watt. That doesn't mean the i7 8700 use less power at those turbo frequencies. It have a lower base-clock to match that lower TDP. It's at that clock it do use 65 watt. So if you want to make a machine where you'll only let it use 65 watt then you can use that one and for heavy multi-threaded loads it will still reach the base clock and for less heavy multi-threaded loads or single-core loads it will boost higher. If you only allowed the 8700K to use 65 watt though then it wouldn't be able to reach its listed base clock with a heavy multi-threaded load. Usually motherboards allow them to pull 140 watt though and then they can reach their higher boost clocks even with heavy multi-threaded loads. But the TDP value is for base clock when the load is heavy.

    AMD TDP isn't grounded in electrical power design whatsoever and is pretty arbitrary. For the Ryzen 7 1700 for instance it's kinda "With the very rubbishrubbishrubbishrubbishty heat-sink we can imagine and assuming this case temperature and accepting the chip to heat up to this temperature the power/heat it would generate is .." which of course relates back to the power draw but the TDP value for the 1700 for instance come from assuming the heat-sink is much worse for that one. (I guess it could be the other way around as in designing the chip to draw that much and then explaining that it will do such and such with a heat-sink this and that crappy / that is enough. But AFAIK that's not the case and the processor can draw more power. It do have PB and XFR and adjust to the conditions. Give it better cooling and it should go above that for all I know.)

    @Glyce: The 9700K and 9900K chips are rumored to have a soldered heat-spreader rather than using TIM meaning heat transfers better from the die to the heat-spreader making them easier to cool.
    Actually I guess the TDP in Intels case may also not be electrical power draw but rather what kind of cooler you need. Though they should still be strongly correlated. Why I mentioned that is because the i7 8700K also have 95 watt TDP with 6 cores at 3.7 GHz base vs 9900K with 95 watt with 8 cores at 3.6 GHz base. Intel may have rounded those numbers off to the 15/35/65/95/(140?) values but if not and manufacturing process haven't changed much what I meant is that maybe the solder there is enough to put the same cooler requirements for the 9900K as for the 8700K even though it do have two more cores running at 100 MHz less in this case.
    The 8700K stock without AVX load isn't too hard to cool. It's overclocked and with AVX it become very hot. Ryzen require much higher voltage very fast if you try to overclock it too with similar result. The Ryzen chips do use solder.

    @Fury559: Zen2 CCXes are rumored to have 6 or 8 cores. If AMD just go with one per Ryzen processor that of course wont increase the amount of cores we have vs now though the manufacturing process also promise higher performance or much lower power draw but I guess that's highly unlikely and more likely we're looking at up to 12 or 16 core Ryzen 3000 series processors. Given a claimed ~60% power draw drop or ~35% higher performance from the manufacturing node (and 2.8x the density) those chips would either still have higher performance than the 9900K but draw quite a bit less power or have quite massively higher performance and much higher in the 16 core case. So for multi-threaded loads it will unlikely be much of a competition. The design of the CCX may also improve somewhat. I wouldn't necessarily put much money onto AMD changing infinity fabric to something else completely removing the added latency it have in some conditions, on the other hand with "higher performance" come higher clock and that higher clock likely includes both the infinity fabric and memory controller which mean that with the same design of those latency will drop some anyway.
    Also Intel is unlikely to make a 12 or 16 core ring-bus design CPU and more cores there add more latency too I assume. Intel invented their mesh bus for more cores. Ring-bus is likely slower with very many cores.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •