Page 1 of 2 12 LastLast
Results 1 to 16 of 25

Thread: DFI LanParty NFII Ultra B

  1. #1
    DR
    DR is offline
    on ye old ship HEXUS DR's Avatar
    Join Date
    Jul 2003
    Location
    HEXUS HQ, Elstree
    Posts
    13,412
    Thanks
    1,060
    Thanked
    841 times in 373 posts

    DFI LanParty NFII Ultra B

    4 port SATA, lots of USB2.0 and FireWire, Gigabit Ethernet, the FrontX and Transpo hardware, class topping Socket A performance, excellent audio, attractive looks. I'm struggling to think what else the board could do right. The layout has a couple of quirks, I ran into a BIOS issue or two, but on the whole I'm supremely impressed.

    http://www.hexus.net/content/reviews...lld19JRD02NjA=

  2. #2
    Senior Member Russ's Avatar
    Join Date
    Jul 2003
    Posts
    5,201
    Thanks
    11
    Thanked
    69 times in 44 posts
    slightly dodgy layout in my opinion. however the 4 sata raid option is a vast improvement, not too sure about the bright colours however, bit too lairy for my liking. however i do like the blue/black colour of the board. and no fan on the heat nb is another bonus.

  3. #3
    Registered User
    Join Date
    Nov 2003
    Location
    Newcastle upon Tyne
    Posts
    84
    Thanks
    0
    Thanked
    3 times in 3 posts
    • undergroove's system
      • CPU:
      • iMac 27" 2011, Macbook Air 11" 2011
      • Operating System:
      • OS X
      • Internet:
      • Sky Broadband
    The loss of a second rounded IDE cable would be no great loss to me from the Rev A version I've got.

    Personally, I've found that if I use a second rounded IDE cable to connect my DVD-ROM & DVD-RW, the way they're installed in the case (Coolermaster ATCS-201) restricts airflow to the tope exhaust fan.

    Instead I've just used a normal 80 pin cable, which I'm able to route between the offside of the case and then to the motherboard - completely avoiding any airflow snarl-ups!!

  4. #4
    Senior Member
    Join Date
    Jul 2003
    Location
    Manchester
    Posts
    515
    Thanks
    4
    Thanked
    3 times in 3 posts
    • wilsonian's system
      • Motherboard:
      • Asus X570 TUF
      • CPU:
      • Ryzen R7 3700X
      • Memory:
      • Corsair Vengeance LPX Black 32GB 3600MHz
      • Storage:
      • Samsung1TB 970 EVO M.2
      • Graphics card(s):
      • Radeon RX570 Nitro+
      • PSU:
      • EVGA 850W Gold
      • Case:
      • Lian Li PC-B25F
    the problem i'm fancing is shall i continue to purchase 32bit CPU's or wait for the 64 bit CPU's & M/B to drop in price. i've been looking at the DFI range alot as my AT7 MAX 2 is starting to show it's age. arghhh what to do! lol

    we had a DFI p4 mobo at a local lan party - very nice, u get loads of extras but the question is do u go out and buy a NF7 (£60) some UV paint and go crazy or do buy every thing in one - the DFI range.......

  5. #5
    Senior Member Russ's Avatar
    Join Date
    Jul 2003
    Posts
    5,201
    Thanks
    11
    Thanked
    69 times in 44 posts
    nf-7 or the extra pence for the an(i think)-7 with the guru chip(just to be different) and a bit of uv paint.

  6. #6
    Registered User
    Join Date
    Nov 2003
    Location
    Newcastle upon Tyne
    Posts
    84
    Thanks
    0
    Thanked
    3 times in 3 posts
    • undergroove's system
      • CPU:
      • iMac 27" 2011, Macbook Air 11" 2011
      • Operating System:
      • OS X
      • Internet:
      • Sky Broadband
    Had thought about that.... but after the "dead caps" fiasco with my KA7 and a few other ABit boards I decided on the Lanparty.

    Pity though, as the AN7 looks like it's hit the sweet spot.... or rather it would if it had a co-ax digital output instead of optical.
    Last edited by undergroove; 24-11-2003 at 12:20 AM.

  7. #7
    Registered User
    Join Date
    Nov 2003
    Location
    Mt Everest
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Memories & DFI LanParty NFII Ultra B

    After trodding through all the MSI, Gigabyte, Asus, Abit, Epox, etc., etc., blah blah blah I stumbled upon this little baby & loved the review along with the Hexus site....finally the Holy Grail....err maybe - the mobo that is I mean, Hexus is great...

    This mobo is cool and has all the bits & more than the competition from what I can see (brain dead from spec'ing & comparing - many thanks to Hexus for bringing my search to an end)....I kinda like the looks of it too, but won't be seen much as I'll be admiring my new WaveMaster 'firey red' (another great Hexus review choice instead knowing it has the kit under the hood ....I know about the 64-thingy but lets face it, alot of £ for driving a Ferrari @ 55mph @ the moment...

    Enough blah & praise for now, though merited. What I'm trying to clarify on this mobo after d'loading their I/OM & using Kingston's MemCheck (non version-B I might add), is if this board can make use of a PC3200(DDR400) 1Mb Kit (x2 512) for the Duel Channel mode of course in slots 1 & 3 (DDR1/2 = channel-one & DDR3 = channel 2)?

    I ask this because it appears that a 512 Kit (x2 256) is the max for DDR400 on this mobo though not clear in DFI's I/OM (if yes is this normal in comparison to others?), see Kingston for reference: -



    I noticed the x2 256 DDR400 was the same config used in the review...

    It will primarily be used for Gaming/Office so suggestions on the best config with the Duel Channel appreciated. I'm looking at the Kingston HyperX as the Corsair XMS seems to have alot of compatibilty issues also mentioned in their forums & in another Hexus review...

    Thanks Hexus for your help...

  8. #8
    Registered User
    Join Date
    Aug 2003
    Posts
    10
    Thanks
    0
    Thanked
    0 times in 0 posts
    Was the 'no USB KB in bios issue' resolved? or can someone confirm you *can* use a usb kb in the bios.

    Thanks, nice review Ryszard.

  9. #9
    Rys
    Rys is offline
    Tiled
    Join Date
    Jul 2003
    Location
    Abbots Langley
    Posts
    1,479
    Thanks
    0
    Thanked
    2 times in 1 post
    I'm pretty sure it was just sample specific. All shipping LanParty 'B' boards should have USB controller init a lot earlier in the boot process.

    I'll try and confirm.

    Rys
    MOLLY AND POPPY!

  10. #10
    Registered User
    Join Date
    Aug 2003
    Posts
    10
    Thanks
    0
    Thanked
    0 times in 0 posts
    Any joy?

  11. #11
    Registered User
    Join Date
    Dec 2003
    Posts
    1
    Thanks
    0
    Thanked
    0 times in 0 posts

    Any chance of Asetek block?

    I was planning on using this board with my Asetek kit, until I read this review and saw that there was a problem mounting the block. Is there any possible way you mount the Asetek block on this board, perhaps if you didn't use a washer/nut on the top of that hole, but only used one on the backside instead? It's going to break my heart if I have to go with another board...

  12. #12
    Rys
    Rys is offline
    Tiled
    Join Date
    Jul 2003
    Location
    Abbots Langley
    Posts
    1,479
    Thanks
    0
    Thanked
    2 times in 1 post
    The USB keyboard issue is sample specific, I just had a funny BIOS.

    As for using the motherboard with an Asetek Waterchill, the issue is with the surface mount component near the top left hole being completely on the edge of hole. There's no space around it for the bolt to rest on. Some rubber washers around the hole MIGHT help, but I'd be wary of crushing it with the bolt eventually. Plus you'd need to do the same on all four corners, to balance it out.

    I wouldn't like to use WaterChill and the DFI to be honest.

    Rys
    MOLLY AND POPPY!

  13. #13
    Rys
    Rys is offline
    Tiled
    Join Date
    Jul 2003
    Location
    Abbots Langley
    Posts
    1,479
    Thanks
    0
    Thanked
    2 times in 1 post
    Here's what I mean. The red line is the gap between the hole edge and the SMT component. It's just too close, the bolt rests on top of it. The other side of the hole has just enough room.



    Rys
    MOLLY AND POPPY!

  14. #14
    Registered User
    Join Date
    Aug 2003
    Posts
    10
    Thanks
    0
    Thanked
    0 times in 0 posts
    Cheers Rys, thanks for taking the time to find out.

  15. #15
    Registered+
    Join Date
    Jan 2004
    Posts
    18
    Thanks
    0
    Thanked
    0 times in 0 posts
    Suppose the newish SLK-900u heatsink is out of the question then?......do you reckon any of the SLK's would fit on as there don't look to be much space around the socket?

    Really like this board and will probably get it anyway, just concerned with the lack of space around the socket restricting my choice of heatsink
    Last edited by frenzy; 08-01-2004 at 11:31 AM.

  16. #16
    Registered User
    Join Date
    Jan 2004
    Posts
    4
    Thanks
    0
    Thanked
    0 times in 0 posts
    Damn, I was hoping to get this board to plonk my new Thermalright SP-97 onto .

    Anyone have any chance to see if this would work,.. is is the problem that the bolts are going to be too big and hit that thing?

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •