Removing an Internal Wall

Hey all,

I`m looking at removing an internal wall at home between the kitchen and Dining room.

I dont think its Supporting but will be checking tonight just to be on the safe side.

To save money I`m looking at doing it myself so was just wondering if anyone has any experience in doing this kind of thing?

Even if its not supporting would it be an idea to put an RSJ in?

Thanks in advance ppl

If it is load bearing, you will beed an RSJ, or a lintle if it is short span) and you need to check the load bearing characteristics of the RSJ.

Depending on the load and location, you can prepare the pads at the ends of the RSJ first, then remove the top of the wall to allow you to slide in the RSJ, then jack it up (acro-props) so it takes the load, insert pad pieces under the supports, and then remove the rest of the wall.

If it isn't load bearing, you can use a much lighter beam (wood, concrete or steel) as it is just a finisher.

You may need to take professional advice to determine if it is load bearing, and if it is, particularly a long span, you might be better off getting professional help. Depending on the condition of the structure above, you might have to make additional provision for supporting it wihile fitting the RSJ, although usually the structure will self support for a short while. RSJs are heavy, do you may need help in lifting it.

You need to ensure you confirm to building control regs to that the resulting structure is safe, and to get a certificate of conformity to ensure the ongoing validity of your house insurance, and resale value when youi come to sell the house.