LinkBack URL
About LinkBacksWhat sort of footings did you use for the lean-to uprights?
What sort of footings did you use for the lean-to uprights?
(\__/)
(='.'=)
(")_(")
Been helped or just 'Like' a post? Use the Thanks button!
My broadband speed - 750 Meganibbles/minute
They are attached to the deck frame with metal stand offs sitting on slabs
Someone left a note on a piece of cake in the fridge that said, "Do not eat!". I ate the cake and left a note saying, "Yuck, who the hell eats paper ?
Excellent work btw.....I was thinking of building something similar at the back door of my house.....whats the noise level like when it rains on the plastic roof?....just my bedroom is at the back and im a light sleeper.
Originally Posted by Barry
Booo
Cheers, David
Loud if you are standing over it Mother, but couldn't really hear much inside, it's only 100 mile away g8ina!
Someone left a note on a piece of cake in the fridge that said, "Do not eat!". I ate the cake and left a note saying, "Yuck, who the hell eats paper ?
OK, so the load is spread over the decking frame. I guess that is one of the reasons for going polycarbonate rather than glass, to keep the weight down?
(\__/)
(='.'=)
(")_(")
Been helped or just 'Like' a post? Use the Thanks button!
My broadband speed - 750 Meganibbles/minute
Barry (11-05-2013)
No, the deck is not supporting any weight at all, the posts are sitting on standoffs, the whole deck is supported by 2" slabs with a base of 2" concrete under that)
The reason behind the polycarbonate was cost, strength, weight and ease of use.
The cost was £106 for the 3 sheets (1250x2 and 1045x1) glass would be a expensive option, around £300 for 8mm toughened
Its very light weigh at only 16KG for all 3 sheets and it's very easy to work with and you can use a table saw to cut it
Just got small things to do now
LED flood light up
The reflection off the roof from the lights in the deck
Last edited by Barry; 04-05-2013 at 02:00 AM.
Someone left a note on a piece of cake in the fridge that said, "Do not eat!". I ate the cake and left a note saying, "Yuck, who the hell eats paper ?
peterb (04-05-2013)
Really professional looking jobbie, great pictures also. Good to see a project like this- 'i'm feelin inspired'.
If you want Toughened Glass you can try these companies in the North:
Impact Safety Glass (Liverpool way)
Kwiktuf (Hull)
CT Glass (Bradford)
We pay a business rate of about £12/m2 for 6mm toughened, 8mm I think is around £18/m2
However I would have thought 6.4 / 8.8 laminated would have been better for a roof above your head! Toughened glass will just crack and propagate if something hits it, or is experiences stress through heat expansion and no tolerance around it's edges.
OK - thanks! Just wondered!No, the deck is not supporting any weight at all, the posts are sitting on standoffs, the whole deck is supported by 2" slabs with a base of 2" concrete under that)
The reason behind the polycarbonate was cost, strength, weight and ease of use.
The cost was £106 for the 3 sheets (1250x2 and 1045x1) glass would be a expensive option, around £300 for 8mm toughened
Its very light weigh at only 16KG for all 3 sheets and it's very easy to work with and you can use a table saw to cut it
(\__/)
(='.'=)
(")_(")
Been helped or just 'Like' a post? Use the Thanks button!
My broadband speed - 750 Meganibbles/minute
Only a tool would not make sure the foundations were solid
Did some work on the step up, replaced a few of the boards with new bits and completely rebuilt the small box part that's hiding the water meter.
Someone left a note on a piece of cake in the fridge that said, "Do not eat!". I ate the cake and left a note saying, "Yuck, who the hell eats paper ?
Indeed, just wasn't obvious from the earlier photos!Only a tool would not make sure the foundations were solid
Great job though!
(\__/)
(='.'=)
(")_(")
Been helped or just 'Like' a post? Use the Thanks button!
My broadband speed - 750 Meganibbles/minute
Now all the fun is over it's time for the bit no one likes - clean up
Because the deck have been down a while loads of crap has collected underneath it so I'm going to lift the boards and give it a good clean tighten everything up replace broke or damage screws
3 boards lifed and you can see the state of it underneath, already found 2 pens, a pencil, a router bit and 20p!
Someone left a note on a piece of cake in the fridge that said, "Do not eat!". I ate the cake and left a note saying, "Yuck, who the hell eats paper ?
Nice work, great thread!
I'm always a bit worried about the crap underneath the decking, there must be a huge amount of dead plant-life under mine... and sooner or later someone will dump a cigarette or something through the gaps and then I presume the whole damn lot will go up.
Does the cleaner actually work well? I've just used the water-blast approach so far, and if nothing else it's amusing.
Been out all day and have just started cleaning, just put the cleaner on and need to give it 15 minutes to work before I can fire up the pressure washer.
I found that all the crap that was built up under deck was wet so not much chance of that catching fire.
Someone left a note on a piece of cake in the fridge that said, "Do not eat!". I ate the cake and left a note saying, "Yuck, who the hell eats paper ?
So cleaning has started
Proper deck cleaning kit is always a good option
30 minutes or so later...
Not perfect but you wouldn't expect it to be, I'll do a second wash tomorrow and leaver the cleaner on for abit longer to see if I can get it any better but all in I am very happy with the result.
Last edited by Barry; 07-05-2013 at 02:52 PM.
Someone left a note on a piece of cake in the fridge that said, "Do not eat!". I ate the cake and left a note saying, "Yuck, who the hell eats paper ?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
