Page 2 of 5 FirstFirst 12345 LastLast
Results 17 to 32 of 70

Thread: It's that time again: LED bulbs - recommendations?

  1. #17
    Treasure Hunter extraordinaire herulach's Avatar
    Join Date
    Apr 2005
    Location
    Bolton
    Posts
    5,618
    Thanks
    18
    Thanked
    172 times in 159 posts
    • herulach's system
      • Motherboard:
      • MSI Z97 MPower
      • CPU:
      • i7 4790K
      • Memory:
      • 8GB Vengeance LP
      • Storage:
      • 1TB WD Blue + 250GB 840 EVo
      • Graphics card(s):
      • 2* Palit GTX 970 Jetstream
      • PSU:
      • EVGA Supernova G2 850W
      • Case:
      • CM HAF Stacker 935, 2*360 Rad WC Loop w/EK blocks.
      • Operating System:
      • Windows 8.1
      • Monitor(s):
      • Crossover 290HD & LG L1980Q
      • Internet:
      • 120mb Virgin Media

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by Phage View Post
    What's your budget ? I normally get these. Not had any blow yet.
    http://www.ledhut.co.uk/spot-lights/...net-price.html
    Do they have a glass on the front? If not those are potentially pretty dangerous. Cheap ones often only have the power circuitry on one leg, so those solder terminals on the face have potential to be at mains voltage (boom boom!)

  2. #18
    DDY
    DDY is offline
    Senior Member DDY's Avatar
    Join Date
    Jun 2006
    Posts
    2,790
    Thanks
    177
    Thanked
    597 times in 412 posts
    • DDY's system
      • Motherboard:
      • ASRock Z390M Pro 4
      • CPU:
      • i5 9600k
      • Memory:
      • 32GB (2x16GB) 3600MHz
      • Storage:
      • Adata SX8200 NVME 1TB
      • Graphics card(s):
      • RX 5700
      • PSU:
      • Seasonic Focus Gold 550W
      • Operating System:
      • Win 7 Pro
      • Monitor(s):
      • Dell U2715H

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by wasabi View Post
    Why would you convert 12v to 12v?
    LEDs themselves don't run at 12V, depending on the LED configuration the voltage can be stepped down or even up. I've not done detailed tear downs, but I've always noticed inductors and various ICs in both the GU10 and MR16 LED bulbs I've trialled and taken apart suggesting some form of switching conversion.

  3. #19
    Account closed at user request
    Join Date
    Aug 2003
    Location
    Elephant watch camp
    Posts
    2,150
    Thanks
    56
    Thanked
    115 times in 103 posts
    • wasabi's system
      • Motherboard:
      • MSI B85M-G43
      • CPU:
      • i3-4130
      • Memory:
      • 8 gig DDR3 Crucial Rendition 1333 - cheap!
      • Storage:
      • 128 gig Agility 3, 240GB Corsair Force 3
      • Graphics card(s):
      • Zotac GTX 750Ti
      • PSU:
      • Silver Power SP-S460FL
      • Case:
      • Lian Li T60 testbanch
      • Operating System:
      • Win7 64bit
      • Monitor(s):
      • First F301GD Live
      • Internet:
      • Virgin cable 100 meg

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by DDY View Post
    LEDs themselves don't run at 12V, depending on the LED configuration the voltage can be stepped down or even up. I've not done detailed tear downs, but I've always noticed inductors and various ICs in both the GU10 and MR16 LED bulbs I've trialled and taken apart suggesting some form of switching conversion.
    Any failed GU10 I've taken apart lights right up at normal brightness when you hook up the simplest last leg of the circuit (cathode and anode) to a 12v battery. Suspect many of them have some kind of polarity checker given the simple 2 pin thing going on in both GU10s and MR16s. And maybe a capacitor to smooth the delivery and a heatsink/fan on the higher wattage units. Or flashy dimmers / colour changers. None of it needed really though in simplest form.

    Never had an MR16 fail, only had 3 GU10s out of dozens last for multiple years (cheapy Lidl ones strangely, suspect due to low 1.8 wattage, and intermittent usage in porch).

    Never personally encountered consumer LED lights that don't natively want to run at 12v. I've dabbled with LEDs in the home / aquarium / electric bike / shed and car for years now.

  4. #20
    Drum & Bass Till I Die deejayburnout's Avatar
    Join Date
    Jun 2012
    Location
    Kinglassie, Fife
    Posts
    2,013
    Thanks
    296
    Thanked
    133 times in 114 posts
    • deejayburnout's system
      • Motherboard:
      • Gigabyte x470 Aorus Ultra Gaming
      • CPU:
      • Ryzen 2600 at stock speeds ( for now)
      • Memory:
      • 2 x Corsair 8GB DDR4 Vengeance LPX 3000MHz
      • Storage:
      • Gigabyte 128GB M.2 PCIe x2 NVMe SSD, 120GB Kingston SV200, 2 x 1TB WD Drive, 2 x 2TB WD Drive
      • Graphics card(s):
      • ASUS ROG Strix RX 580 8G Gaming OC Edition
      • PSU:
      • OCZ 750 Watt
      • Case:
      • NZXT Noctis 450
      • Operating System:
      • Windows 10 64bit
      • Monitor(s):
      • LG 34UM65-P Ultrawide
      • Internet:
      • 72mb Down 19mb up - Vodafone

    Re: It's that time again: LED bulbs - recommendations?

    Rob.

    In hope my electrical work is OK.

    Led hut is great for lamps. In use them all in my house.

    I use these GU10s - http://www.ledhut.co.uk/spot-lights/...eam-angle.html

    The all come with a 5 year warrenty. If the fail, the company will replace.
    Better to Burn out than Fade Away
    Check out my Youtube channel - Crispy Crisperson

  5. Received thanks from:

    Rob_B (25-12-2014)

  6. #21
    ALT0153™ Rob_B's Avatar
    Join Date
    Jul 2006
    Posts
    6,087
    Thanks
    345
    Thanked
    700 times in 484 posts

    Re: It's that time again: LED bulbs - recommendations?

    I reckon the workmanship is up to scratch Chris

    Amazon reviews for the bulbs I have suggest they do go easily, I've seen those ones on Amazon Chris, wasn't sure if the beam would be too focused, guess I didn't read the description! (30% off LEDHUT at the moment too )
    Last edited by Rob_B; 24-12-2014 at 08:57 PM.

  7. #22
    ALT0153™ Rob_B's Avatar
    Join Date
    Jul 2006
    Posts
    6,087
    Thanks
    345
    Thanked
    700 times in 484 posts

    Re: It's that time again: LED bulbs - recommendations?

    Ended up with 5 of these for £27.12
    http://www.ledhut.co.uk/spot-lights/...50-lumens.html

    That's with 30% off + there is 20% quidco (about a fiver) to come

    Fingers crossed these ones last!

  8. #23
    root Member DanceswithUnix's Avatar
    Join Date
    Jan 2006
    Location
    In the middle of a core dump
    Posts
    12,335
    Thanks
    714
    Thanked
    1,406 times in 1,188 posts
    • DanceswithUnix's system
      • Motherboard:
      • Asus X470-PRO
      • CPU:
      • 3700X
      • Memory:
      • 32GB 3200MHz ECC
      • Storage:
      • 1TB Linux, 1TB Games (Win 10)
      • Graphics card(s):
      • Asus Strix RX Vega 56
      • PSU:
      • 650W Corsair TX
      • Case:
      • Antec 300
      • Operating System:
      • Fedora 33 + Win 10 Pro 64 (yuk)
      • Monitor(s):
      • Benq XL2730Z 1440p + Iiyama 27" 1440p
      • Internet:
      • Zen 80Mb/20Mb VDSL

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by wasabi View Post
    I've used individual transformers in the kitchen when I redid it, but in the bathroom I just used a single LED transformer to drive all the downlights. Since MR16s are very simple and don't have quite the risk of badly wired trasformers lurking inside the housing, I mostly just use cheapy LEDs direct from HK or Singapore paired with a European transformer.
    I have 18 lamps in the kitchen (it is an odd L shape) and frankly really didn't want to re-wire a single bulb.

    These seem to work fine with the old constant voltage transformers.

    Will be a while before I find out if the 15 year lifespan is reduced.

  9. #24
    DDY
    DDY is offline
    Senior Member DDY's Avatar
    Join Date
    Jun 2006
    Posts
    2,790
    Thanks
    177
    Thanked
    597 times in 412 posts
    • DDY's system
      • Motherboard:
      • ASRock Z390M Pro 4
      • CPU:
      • i5 9600k
      • Memory:
      • 32GB (2x16GB) 3600MHz
      • Storage:
      • Adata SX8200 NVME 1TB
      • Graphics card(s):
      • RX 5700
      • PSU:
      • Seasonic Focus Gold 550W
      • Operating System:
      • Win 7 Pro
      • Monitor(s):
      • Dell U2715H

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by wasabi View Post
    Any failed GU10 I've taken apart lights right up at normal brightness when you hook up the simplest last leg of the circuit (cathode and anode) to a 12v battery. Suspect many of them have some kind of polarity checker given the simple 2 pin thing going on in both GU10s and MR16s. And maybe a capacitor to smooth the delivery and a heatsink/fan on the higher wattage units. Or flashy dimmers / colour changers. None of it needed really though in simplest form.

    Never had an MR16 fail, only had 3 GU10s out of dozens last for multiple years (cheapy Lidl ones strangely, suspect due to low 1.8 wattage, and intermittent usage in porch).

    Never personally encountered consumer LED lights that don't natively want to run at 12v. I've dabbled with LEDs in the home / aquarium / electric bike / shed and car for years now.
    It's not uncommon for lower wattage LED systems to use resistors for current limiting and can be on die as mentioned by PeterB. Hence, you can stick a good few volts at without worrying about the current across these LEDs.

    However, high power and high efficiency LED systems are unlikely to use resistors for current limiting because they ruin efficiency and dump heat where you don't want it. For these, sticking 12V or any other voltage that's not constant current can be a bad idea.

    Now that I've mentioned high power LEDs, now's a good time for a gratuitous show-off of my current project, a portable 100W lipo powered LED torch. I'll be testing it outdoors soon, will post pics when I do.

    Quoted 7500lm of light with a tested battery life of around 70 minutes. Body crudely designed and 3D printed by myself, any resemblance to an 80s sci-fi prop is coincidental.



    More info once I get the outdoor tests done.
    Last edited by DDY; 24-12-2014 at 11:14 PM.

  10. Received thanks from:

    cptwhite_uk (24-12-2014)

  11. #25
    Senior Member cptwhite_uk's Avatar
    Join Date
    Aug 2004
    Posts
    4,122
    Thanks
    473
    Thanked
    577 times in 393 posts
    • cptwhite_uk's system
      • Motherboard:
      • MSI B450i Gaming plus Wifi
      • CPU:
      • AMD Ryzen 3700X
      • Memory:
      • 16Gb DRR4 Trident Z 3200 C16
      • Storage:
      • Adata XPG SX8200 Pro 1Tb NVME SSD
      • Graphics card(s):
      • RTX 3060 Ti 8Gb
      • PSU:
      • Corsair SF600 Gold
      • Case:
      • Ncase M1 v6
      • Operating System:
      • Windows 10 Pro
      • Monitor(s):
      • Dell S2721DGF (2560x1440 144Hz Nano IPS)
      • Internet:
      • Virgin Media 350Mbps

    Re: It's that time again: LED bulbs - recommendations?

    I'm fairly clued up about LED lights these days so want to dispel a few points:

    All commercially available LED's that I've seen either run at 12V or 24V
    You cannot run LED's off mains (230/240V) without some form of transformer stepping down the voltage to the required level. Typically 12V.
    The step down in voltage is often within the housing of the GU10 bulbs you get so they can be directly fitted into existing systems
    GU10 and GU5.3 (or MR16 as people are referring to them here) refers to the pin connection type on the back, MR16 is the reflector (housing) size...see here: http://en.wikipedia.org/wiki/Multifaceted_reflector

    LEDHut are a good internet supplier, but you can also try V-TAC (london based importer). If you're doing a full re-wiring setup you can see if Sunpower UK (Reading based) will supply you with the Transformers (LED transformer specialists).

    From what I've seen Philips would be the brand to go with for high end.

    Just some notes regarding LED:

    LED are very voltage sensitive. If the wiring in your house isn't providing a highly stable voltage this could be the cause of them burning out. I'd recommend reading these 2 articles if you want to know more:

    http://www.digikey.com/en/articles/t...t-power-supply
    http://www.amperor.com/products/led/...ed_driver.html

    To try and simplify the explanations in the below links LED have an activation voltage (they aren't linear like traditional bulbs where doubling the voltage would double the power and therefore ~ 2x the brightness). What this means is upto 11.9V lets say, you will see no effect at all, then at a certain voltage you will see the LED activate, apply more voltage and it will get brighter, but this will reduce the life expectancy (thus they have an optimal voltage they should be run at).

    As the LED heats up it actually requires LESS voltage to push the same current through the circuit, unfortunately it also becomes less efficient at producing light as it warms up. The second point has a greater overall bearing on performance when both factors are taken into consideration, so LEDs run more efficiently (less power needed) when cool, hence high powered LED have metal heat sinks to dissipate the heat build up.

    The voltage they operate at is VERY sensitive. For example if we look at these two graphs:



    3V produces 1 amp = 400 lumen approx.
    3.2V produces 1.8 amp = 700 lumen approx.

    ...a 0.2V increase nearly doubles the light output! Hence a voltage stable system is required to stop early bulb failure.

    This sensitivity to voltage is also the reason you can only put so many in series before the ones on the fair end of the setup simply stop lighting. This is due to V drop over the length of the circuit. If you imagine you have a 12V circuit. You'd expect 12V LED bulbs to work on it (and they will, but only upto a limited number). If you think of it this way, every light in the circuit reduces the voltage for the next light in the series. So the first bulb receives the full 12V, the second maybe 11.95V, the third 11.9V and so on. This is known as V drop and happens as resistance (LED bulbs in this case) build up. I've already explained that LED are highly voltage dependent, so eventually you reach a situation where the V drop is too great and the voltage the circuit is supplying to the end bulbs doesn't reach the actiation voltage required.

    My final point would be with regards to the transformers. You can get CC (constant current) or CV (constant voltage). The articles above explain the difference. But in a nutshell CV are "dumb" transformers stepping down the mains voltage to the voltage they're designed to do...typically 12V or 24V. They also have a maximum rated wattage (like PC power supplies, no difference there). In fact PC power supplies can be used for 12V LED systems, as they provide 12V outputs

    CC have feedback systems which vary the voltage to maintain a constant current. Now I know we talk about LED in terms of voltage, but technically this is wrong, they should be rated at an optimal current. It's just that voltage is a term people are more familiar with so manufactures use that, confusingly. If we accept LED's should run at a rated current, you can now see why a constant current transformer would be a good thing! CC transformers will vary the voltage to ensure constant current at different operating temperatures, maximising the life span of the LED bulbs and ensuring they are not over powered and "burnt out".

    Having said this, most setups use constant voltage systems as it's "good enough" and cheaper to buy.

  12. Received thanks from:

    Rob_B (25-12-2014),wasabi (03-01-2015)

  13. #26
    Drum & Bass Till I Die deejayburnout's Avatar
    Join Date
    Jun 2012
    Location
    Kinglassie, Fife
    Posts
    2,013
    Thanks
    296
    Thanked
    133 times in 114 posts
    • deejayburnout's system
      • Motherboard:
      • Gigabyte x470 Aorus Ultra Gaming
      • CPU:
      • Ryzen 2600 at stock speeds ( for now)
      • Memory:
      • 2 x Corsair 8GB DDR4 Vengeance LPX 3000MHz
      • Storage:
      • Gigabyte 128GB M.2 PCIe x2 NVMe SSD, 120GB Kingston SV200, 2 x 1TB WD Drive, 2 x 2TB WD Drive
      • Graphics card(s):
      • ASUS ROG Strix RX 580 8G Gaming OC Edition
      • PSU:
      • OCZ 750 Watt
      • Case:
      • NZXT Noctis 450
      • Operating System:
      • Windows 10 64bit
      • Monitor(s):
      • LG 34UM65-P Ultrawide
      • Internet:
      • 72mb Down 19mb up - Vodafone

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by Rob_B View Post
    Ended up with 5 of these for £27.12
    http://www.ledhut.co.uk/spot-lights/...50-lumens.html

    That's with 30% off + there is 20% quidco (about a fiver) to come

    Fingers crossed these ones last!
    Good choice.

    If they fail within the warranty period, the will be replaced gratis.

    The ones I linked to in previous post are these one I have and look like this in my kitchen. Very bright

    https://www.dropbox.com/s/4dt9et211j...24148.jpg?dl=0
    Better to Burn out than Fade Away
    Check out my Youtube channel - Crispy Crisperson

  14. #27
    ALT0153™ Rob_B's Avatar
    Join Date
    Jul 2006
    Posts
    6,087
    Thanks
    345
    Thanked
    700 times in 484 posts

    Re: It's that time again: LED bulbs - recommendations?

    Looks good, I went for the 120 degree ones, as you've seen our bathroom is tiny so not sure why I did that but oh well it's done now!

    Can't get away with cool whites in the kitchen, looks far too bright, maybe when I get around to changing the counter top it might look better but for now I'll stick with the cheapy 'warm' SMDs I've got.

  15. #28
    Drum & Bass Till I Die deejayburnout's Avatar
    Join Date
    Jun 2012
    Location
    Kinglassie, Fife
    Posts
    2,013
    Thanks
    296
    Thanked
    133 times in 114 posts
    • deejayburnout's system
      • Motherboard:
      • Gigabyte x470 Aorus Ultra Gaming
      • CPU:
      • Ryzen 2600 at stock speeds ( for now)
      • Memory:
      • 2 x Corsair 8GB DDR4 Vengeance LPX 3000MHz
      • Storage:
      • Gigabyte 128GB M.2 PCIe x2 NVMe SSD, 120GB Kingston SV200, 2 x 1TB WD Drive, 2 x 2TB WD Drive
      • Graphics card(s):
      • ASUS ROG Strix RX 580 8G Gaming OC Edition
      • PSU:
      • OCZ 750 Watt
      • Case:
      • NZXT Noctis 450
      • Operating System:
      • Windows 10 64bit
      • Monitor(s):
      • LG 34UM65-P Ultrawide
      • Internet:
      • 72mb Down 19mb up - Vodafone

    Re: It's that time again: LED bulbs - recommendations?

    The 120 deg are the ones i have and they are very good. Nice spread of light.

    Merry Christmas to everyone by the way.

  16. #29
    Pork & Beans Powerup Phage's Avatar
    Join Date
    May 2009
    Location
    Kent
    Posts
    6,260
    Thanks
    1,618
    Thanked
    608 times in 518 posts
    • Phage's system
      • Motherboard:
      • Asus Crosshair VIII
      • CPU:
      • 3800x
      • Memory:
      • 16Gb @ 3600Mhz
      • Storage:
      • Samsung 960 512Gb + 2Tb Samsung 860
      • Graphics card(s):
      • EVGA 1080ti
      • PSU:
      • BeQuiet 850w
      • Case:
      • Fractal Define 7
      • Operating System:
      • W10 64
      • Monitor(s):
      • Iiyama GB3461WQSU-B1

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by herulach View Post
    Do they have a glass on the front? If not those are potentially pretty dangerous. Cheap ones often only have the power circuitry on one leg, so those solder terminals on the face have potential to be at mains voltage (boom boom!)
    Yes of course they do
    Society's to blame,
    Or possibly Atari.

  17. #30
    The late but legendary peterb - Onward and Upward peterb's Avatar
    Join Date
    Aug 2005
    Location
    Looking down & checking on swearing
    Posts
    19,378
    Thanks
    2,892
    Thanked
    3,403 times in 2,693 posts

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by cptwhite_uk View Post
    I'm fairly clued up about LED lights these days so want to dispel a few points:

    All commercially available LED's that I've seen either run at 12V or 24V
    You cannot run LED's off mains (230/240V) without some form of transformer stepping down the voltage to the required level. Typically 12V.
    The step down in voltage is often within the housing of the GU10 bulbs you get so they can be directly fitted into existing systems
    GU10 and GU5.3 (or MR16 as people are referring to them here) refers to the pin connection type on the back, MR16 is the reflector (housing) size...see here: http://en.wikipedia.org/wiki/Multifaceted_reflector

    LEDHut are a good internet supplier, but you can also try V-TAC (london based importer). If you're doing a full re-wiring setup you can see if Sunpower UK (Reading based) will supply you with the Transformers (LED transformer specialists).

    From what I've seen Philips would be the brand to go with for high end.

    Just some notes regarding LED:

    LED are very voltage sensitive. If the wiring in your house isn't providing a highly stable voltage this could be the cause of them burning out. I'd recommend reading these 2 articles if you want to know more:

    http://www.digikey.com/en/articles/t...t-power-supply
    http://www.amperor.com/products/led/...ed_driver.html

    To try and simplify the explanations in the below links LED have an activation voltage (they aren't linear like traditional bulbs where doubling the voltage would double the power and therefore ~ 2x the brightness). What this means is upto 11.9V lets say, you will see no effect at all, then at a certain voltage you will see the LED activate, apply more voltage and it will get brighter, but this will reduce the life expectancy (thus they have an optimal voltage they should be run at).

    As the LED heats up it actually requires LESS voltage to push the same current through the circuit, unfortunately it also becomes less efficient at producing light as it warms up. The second point has a greater overall bearing on performance when both factors are taken into consideration, so LEDs run more efficiently (less power needed) when cool, hence high powered LED have metal heat sinks to dissipate the heat build up.

    The voltage they operate at is VERY sensitive. For example if we look at these two graphs:



    3V produces 1 amp = 400 lumen approx.
    3.2V produces 1.8 amp = 700 lumen approx.

    ...a 0.2V increase nearly doubles the light output! Hence a voltage stable system is required to stop early bulb failure.

    This sensitivity to voltage is also the reason you can only put so many in series before the ones on the fair end of the setup simply stop lighting. This is due to V drop over the length of the circuit. If you imagine you have a 12V circuit. You'd expect 12V LED bulbs to work on it (and they will, but only upto a limited number). If you think of it this way, every light in the circuit reduces the voltage for the next light in the series. So the first bulb receives the full 12V, the second maybe 11.95V, the third 11.9V and so on. This is known as V drop and happens as resistance (LED bulbs in this case) build up. I've already explained that LED are highly voltage dependent, so eventually you reach a situation where the V drop is too great and the voltage the circuit is supplying to the end bulbs doesn't reach the actiation voltage required.

    My final point would be with regards to the transformers. You can get CC (constant current) or CV (constant voltage). The articles above explain the difference. But in a nutshell CV are "dumb" transformers stepping down the mains voltage to the voltage they're designed to do...typically 12V or 24V. They also have a maximum rated wattage (like PC power supplies, no difference there). In fact PC power supplies can be used for 12V LED systems, as they provide 12V outputs

    CC have feedback systems which vary the voltage to maintain a constant current. Now I know we talk about LED in terms of voltage, but technically this is wrong, they should be rated at an optimal current. It's just that voltage is a term people are more familiar with so manufactures use that, confusingly. If we accept LED's should run at a rated current, you can now see why a constant current transformer would be a good thing! CC transformers will vary the voltage to ensure constant current at different operating temperatures, maximising the life span of the LED bulbs and ensuring they are not over powered and "burnt out".

    Having said this, most setups use constant voltage systems as it's "good enough" and cheaper to buy.
    While I wouldn't disagree in principle with that, an LED operating voltage is 2.4 volts (as the graphs show) not 12 volts, and so any LED lamp that runs off any voltage above that voltage needs some form of regulation.

    But it is slightly more complicated than that. An LED is no different electrically from any other diode. It has a maximum reverse breakdown voltage, a maximum reverse current, a forward voltage drop and a maximum forward current. An LED forward voltage drop is, as stated, 2.4 volts, and when that is reached, the forward resistance is very low, and so the current has to be limited by other means, hence a constant currant source.

    You can run an LED cut at any voltage above 2.4 volts by running it in series with a resistor, which is what you do for an LED indicator or panel light. The resistor, combined with a steady DC voltage forms the constant current source. If the LED is shorted out, the current drawn through the resistor will not change.

    Most LED lamps for general purpose illumination consist of arrays of LED elements, each one has to be fed with a constant current. The challenges depend on the source supply for the array, 12 or 230, AC or DC, and providing that supply as efficiently as possible.
    (\__/)
    (='.'=)
    (")_(")

    Been helped or just 'Like' a post? Use the Thanks button!
    My broadband speed - 750 Meganibbles/minute

  18. #31
    Senior Member watercooled's Avatar
    Join Date
    Jan 2009
    Posts
    11,459
    Thanks
    1,539
    Thanked
    1,024 times in 868 posts

    Re: It's that time again: LED bulbs - recommendations?

    Quote Originally Posted by cptwhite_uk View Post
    This sensitivity to voltage is also the reason you can only put so many in series before the ones on the fair end of the setup simply stop lighting. This is due to V drop over the length of the circuit. If you imagine you have a 12V circuit. You'd expect 12V LED bulbs to work on it (and they will, but only upto a limited number). If you think of it this way, every light in the circuit reduces the voltage for the next light in the series. So the first bulb receives the full 12V, the second maybe 11.95V, the third 11.9V and so on. This is known as V drop and happens as resistance (LED bulbs in this case) build up. I've already explained that LED are highly voltage dependent, so eventually you reach a situation where the V drop is too great and the voltage the circuit is supplying to the end bulbs doesn't reach the actiation voltage required.
    That's not quite how diode voltage drop works. If you put a load of diodes in series, each diode will need a potential equal to or greater than its Vf in order to pass current and light. If you put a multimeter in volt mode across an LED, you'll measure the voltage drop across it, which provided it's lit will be around its Vf i.e. something like 3.2V. Add up the voltage across each diode and you end up with the supply voltage, minus any resistive drop in the cables, drop resistors, etc. This is why for '12v' chains, you'll generally have three LEDs in series along with a resistor which is chosen based on desired current, any more than that and you'll find there are simply more chains of three added in parallel. If you try adding more diodes so the combined forward voltage is greater than the supply voltage, you'll reach a point where they'll just stop conducting and the whole chain will not light.

    If you start adding larger numbers of diodes to each chain, you can run into problems with the variability of Vdrop resulting in significantly uneven power to the LEDs, which in turn will shorten lifespan.

    This is more of an immediate problem when trying to run LEDs directly in parallel however - unless you select them with closely matched Vf, they can be a nightmare to control. E.g. in order to power one with a higher Vf efficiently, you might be over-driving the other and vice-versa. So you end up with different current, and therefore power, flowing to each LED.

    Voltage then isn't just a throwaway term when it comes to LEDs at all, it's quite an important metric when e.g. designing driver circuits, matching them to run in circuit, etc, just like it's important for any diode. Current and voltage aren't interchangeable so you need to know both when designing drivers. E.g. it's no good designing a CC driver for a chain if its output voltage is lower than the combined Vf of the diodes.

    Quote Originally Posted by cptwhite_uk View Post
    My final point would be with regards to the transformers. You can get CC (constant current) or CV (constant voltage). The articles above explain the difference. But in a nutshell CV are "dumb" transformers stepping down the mains voltage to the voltage they're designed to do...typically 12V or 24V. They also have a maximum rated wattage (like PC power supplies, no difference there). In fact PC power supplies can be used for 12V LED systems, as they provide 12V outputs

    CC have feedback systems which vary the voltage to maintain a constant current. Now I know we talk about LED in terms of voltage, but technically this is wrong, they should be rated at an optimal current. It's just that voltage is a term people are more familiar with so manufactures use that, confusingly. If we accept LED's should run at a rated current, you can now see why a constant current transformer would be a good thing! CC transformers will vary the voltage to ensure constant current at different operating temperatures, maximising the life span of the LED bulbs and ensuring they are not over powered and "burnt out".

    Having said this, most setups use constant voltage systems as it's "good enough" and cheaper to buy.
    For powering a single LED/series chain, a CV/CC supply would be ideal as it would both limit no-load voltage and prevent thermal runaway killing diodes. However, CC isn't without its problems - speaking in terms of a lighting transformer supplying multiple spotlights for instance, it would be near useless unless you had one for every lamp, and even then you'd be very limited to what lamps would be compatible.

    E.g. imagine your bathroom has an LED CC supply for say 3 spots, supplying say 1.5A if each lamp wants 500mA. What happens when a lamp fails or is removed? The other two share that 1.5A between them, 750mA each, and probably go pop, or if its supply voltage is close to the ideal voltage anyway, you essentially just end up back with with a CV supply. You're also pretty much wasting your time using a CC supply for >1 series chain anyway because of the variability mentioned earlier; you can potentially still end up with one chain hitting thermal runaway without the CC regulator reacting.

  19. Received thanks from:

    cptwhite_uk (07-01-2015)

  20. #32
    ALT0153™ Rob_B's Avatar
    Join Date
    Jul 2006
    Posts
    6,087
    Thanks
    345
    Thanked
    700 times in 484 posts

    Re: It's that time again: LED bulbs - recommendations?

    Just received and fitted them, wow they're bright, I know my previous ones were 4W and these are 4.5 but the difference is unreal!

Page 2 of 5 FirstFirst 12345 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •