Hedge Trimming - a dangerous occupation
So, getting back from holiday and being in a 'can-do' frame of mind, I decided to set about our front hedge. It's been a while since I cut it back (possibly 2 years!) so there was a lot to come off. It took me about an hour and a half to get about half-way, with a crappy old Challenge 40cm wired hedge-trimmer, and at this point, Mrs Smudger brought me out a drink and informed me she was going to pick up the progeny from nursery. By this time the recycling bin was pretty full up and my 'can-do' attitude was waining. So I had a drink, then resumed. I was cutting one bit thinking 'that cable's a bit close to the blade'. And the next thing I know, there's a bit of a flash and a pop, and I've gone through the cable. No shock felt, just mild alarm. So that puts an end to that day's trimming. Oh, shame.
Anyway, I get myself to Bunnings and get a new Ryobi battery-operated one, as the missus won't allow me a wired one any more - something about my life insurance not being enough to make her rich once the mortgage is paid off. Something which cost me a fair bit over the price of another bog-standard, no-name device.
And I have to say, these things are a wonder. I finished off the rest of the hedge in about 20 minutes, and the longer reach and it's got a ridge up the middle of the blades so all the debris gets guided off, instead of going in your face/hair/back. I'm now considering going and trimming all the hedges around my way, just to get to use it some more.
The downside is, no matter how good your trimmer, you still have to pick up all the tiny bits that fall to the floor.
Re: Hedge Trimming - a dangerous occupation
Interesting.
What voltage are the batteries?
I'd been contemplating a new strimmer, but it needs to be relatively heavy duty. Currently, I'm using a friend's 2-stroke petrol jobbie, but I had wondered about modern battery variants.
Re: Hedge Trimming - a dangerous occupation
It's 18v, and you can get different Ah ratings according to your needs. They even have Lawnmowers that run off the batteries! You can get them with or without the batteries, so that if you've got nothing, you get a kit with 1 or two batteries plus a charger, that's cheaper that buying them separately.
Good point - batteries run across all devices from that manufacturer
Bad point - batteries only run across devices from that manufacturer
The guy in Bunnings recommended that if you're going in, you get your battery with your garden set, as these tend to have higher Ah ratings, then any additional tools you get will have use of the higher Ah batteries. The DIY tools tend to come with 1.3 or 1.5 Ah batteries.
Re: Hedge Trimming - a dangerous occupation
Top advice - I'm in the market myself.
I didn't know Bunnings was in the UK though. Do you get a sausage sandwich ?
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Smudger
Bad point - batteries only run across devices from that manufacturer
I'd take corporate and government concern for the environment a lot more seriously if they were to agree to let someone like the ISO design a universal battery mount. And similarly a lot of other 'things' could use international standards but for interchangability and maintainability.
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Phage
Top advice - I'm in the market myself.
I didn't know Bunnings was in the UK though. Do you get a sausage sandwich ?
They've only got 2 at the moment, both in St Albans for some reason, but they are converting Homebase stores to the new brand, so stock/prices should be the same across both. The Sausage 'Sizzle' was available, but I didn't partake as I'd not long had breakfast
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
kompukare
I'd take corporate and government concern for the environment a lot more seriously if they were to agree to let someone like the ISO design a universal battery mount. And similarly a lot of other 'things' could use international standards but for interchangability and maintainability.
This is a good point, some go with the 'pointy bit sticking up' approach, and others go for the 'slidey' kind. My Makita drill set only has Ni-cD batteries, and also has a sticky-up bit, but I checked and they're both different sizes.
And strangely, Makita's new Li-ion batteries are the slidey sort, so you can't just upgrade your Ni-cD battery with a Li-ion one, cos they're different fittings. Which is what got me looking at the Ryobi sets in the first place.
Re: Hedge Trimming - a dangerous occupation
Easiest way to pickup all the trimmings is to use a tarpaulin, run it along the bottom of the hedge so that all the bits fall in, then just roll it up and empty into the bin. Ideally use a tarp long enough for your hedge.
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Smudger
This is a good point, some go with the 'pointy bit sticking up' approach, and others go for the 'slidey' kind. My Makita drill set only has Ni-cD batteries, and also has a sticky-up bit, but I checked and they're both different sizes.
And strangely, Makita's new Li-ion batteries are the slidey sort, so you can't just upgrade your Ni-cD battery with a Li-ion one, cos they're different fittings. Which is what got me looking at the Ryobi sets in the first place.
Check for adapters to use the different battery types with Makita, I did find some to allow an upgrade for my drill from NiCad to Li-Ion.
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Flibb
Easiest way to pickup all the trimmings is to use a tarpaulin, run it along the bottom of the hedge so that all the bits fall in, then just roll it up and empty into the bin. Ideally use a tarp long enough for your hedge.
I used an old pair of curtains. Our hedge is about 30ft long though, so never going to find anything long enough to go under the whole hedge. Then had to get into the bin and jump up and down so I could fit more in...
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Flibb
Check for adapters to use the different battery types with Makita, I did find some to allow an upgrade for my drill from NiCad to Li-Ion.
Thanks, I'll take a look. Only thing is, the battery alone for Makita was about £80. Could get a new drill for that. Seems a waste, as there's nothing wrong with the drill itself, just the battery's gotten old and lost its oomph.
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Smudger
Thanks, I'll take a look. Only thing is, the battery alone for Makita was about £80. Could get a new drill for that. Seems a waste, as there's nothing wrong with the drill itself, just the battery's gotten old and lost its oomph.
Have used the NiCad OEM ones from amazon, think they are around £20 . Couple of years of weekly use and still going strong.
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Smudger
I used an old pair of curtains. Our hedge is about 30ft long though, so never going to find anything long enough to go under the whole hedge. Then had to get into the bin and jump up and down so I could fit more in...
http://www.screwfix.com/p/harris-tas...50m-x-2m/19574 Or if you want something a bit more robust they go up to 24 foot - http://www.screwfix.com/c/decorating...uctlength=24__
Re: Hedge Trimming - a dangerous occupation
Quote:
Originally Posted by
Flibb
Have used the NiCad OEM ones from amazon, think they are around £20 . Couple of years of weekly use and still going strong.
I was hoping they did a Li-ion battery that fits where the ni-cd one used to, my use of the drill is so infrequent that whenever I go to use it, the batteries have both died. Basically, I'm trying to find an excuse to buy some shiny new man-tools, but my use case prevents that. I don't use it enough for the battery to still be charged, therefore I don't really need a new shiny tool where the battery doesn't die (anywhere near as quickly) when not in use. And it only takes about 10 minutes to charge the batteries I've got...
Re: Hedge Trimming - a dangerous occupation
That's not a bad price for something that will save hours of time.
Re: Hedge Trimming - a dangerous occupation
?
Quote:
Originally Posted by
Smudger
I was hoping they did a Li-ion battery that fits where the ni-cd one used to, my use of the drill is so infrequent that whenever I go to use it, the batteries have both died. Basically, I'm trying to find an excuse to buy some shiny new man-tools, but my use case prevents that. I don't use it enough for the battery to still be charged, therefore I don't really need a new shiny tool where the battery doesn't die (anywhere near as quickly) when not in use. And it only takes about 10 minutes to charge the batteries I've got...
Li-ion chargers are different to NiCd so it's no doubt in part due to safety considerations. Incorrectly charged or worse, damaged LiIons can result in some VERY impressive fires. And on e those fires start, they're all but impossible to put out until "fuel" runs out.