Results 1 to 5 of 5

Thread: Opening samsung q70 case for RAM upgrade

  1. #1
    Member
    Join Date
    Feb 2007
    Location
    London
    Posts
    132
    Thanks
    0
    Thanked
    0 times in 0 posts

    Opening samsung q70 case for RAM upgrade

    Hi all,

    I have a Samsung q70 laptop and want to upgrade the RAM to 4GBs.

    Of course I have been able to put 2GBs in the easy to access slot on the base however I need to replace the other RAM slot's RAM.

    Does any body know how I can take the case apart to access it?

    I can find no help for this on the Samsung Q70 support site. Grrrrr

    Thanks in advance.

    Brent
    PC Spec: Asus P5N-E SLI NF650i SLi | Intel Core 2 E6600 | 2GB (2x1GB) Corsair Twinx XMS2, DDR2 PC-6400 (800) 240 Pinn, Non-ECC Unbuffered CAS 5-5-5-18 EPP DHX | 1.22TB (2 Internal, 1 External) | 256MB MSI 8600GT, PCI-E (x16), Mem 1400 MHz, GDDR2, GPU 540 MHz, 2x Dual Link DVI-I/HDTV | 520W Corsair HX Series Modular PSU, ATX, EPS12V | Coolermaster Praetorian 730 Silver | Philips 17" and Samsung 32" LCD 720 HD

  2. #2
    Senior Member
    Join Date
    Mar 2008
    Posts
    799
    Thanks
    66
    Thanked
    71 times in 70 posts
    • kmac's system
      • Motherboard:
      • Gigabyte GA-P55-US3L
      • CPU:
      • Intel Core i5 750
      • Memory:
      • 2GB Corsair DDR3
      • Storage:
      • 2 Samsung F3 500GB each
      • Graphics card(s):
      • ATI HD4770
      • PSU:
      • Enermax Modu 82+ 525W
      • Case:
      • Lain -Li PC-7FN Black
      • Operating System:
      • Windows 7 Prof 64 Bit
      • Monitor(s):
      • Dell U2412M

    Re: Opening samsung q70 case for RAM upgrade

    This review
    http://www.notebookreview.com/default.asp?newsID=3806

    Says that it is "under the keyboard but not considered to be user accessible"

    Is there an obvious way to lift the keybaord?

  3. #3
    Member
    Join Date
    Feb 2007
    Location
    London
    Posts
    132
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Opening samsung q70 case for RAM upgrade

    Not really. That's what I figured. There are some screws on the base labelled KBD so I unscrewed them all but then couldn't figure out what to do next!

    The keyboard doesn't have any obvious clips that I can see.
    PC Spec: Asus P5N-E SLI NF650i SLi | Intel Core 2 E6600 | 2GB (2x1GB) Corsair Twinx XMS2, DDR2 PC-6400 (800) 240 Pinn, Non-ECC Unbuffered CAS 5-5-5-18 EPP DHX | 1.22TB (2 Internal, 1 External) | 256MB MSI 8600GT, PCI-E (x16), Mem 1400 MHz, GDDR2, GPU 540 MHz, 2x Dual Link DVI-I/HDTV | 520W Corsair HX Series Modular PSU, ATX, EPS12V | Coolermaster Praetorian 730 Silver | Philips 17" and Samsung 32" LCD 720 HD

  4. #4
    Member
    Join Date
    Feb 2007
    Location
    London
    Posts
    132
    Thanks
    0
    Thanked
    0 times in 0 posts

    Re: Opening samsung q70 case for RAM upgrade

    If it's not possible for me to do it, that's fine 3gb is enough. Just a bit annoying that it could be 4gb if I could just get in there!!
    PC Spec: Asus P5N-E SLI NF650i SLi | Intel Core 2 E6600 | 2GB (2x1GB) Corsair Twinx XMS2, DDR2 PC-6400 (800) 240 Pinn, Non-ECC Unbuffered CAS 5-5-5-18 EPP DHX | 1.22TB (2 Internal, 1 External) | 256MB MSI 8600GT, PCI-E (x16), Mem 1400 MHz, GDDR2, GPU 540 MHz, 2x Dual Link DVI-I/HDTV | 520W Corsair HX Series Modular PSU, ATX, EPS12V | Coolermaster Praetorian 730 Silver | Philips 17" and Samsung 32" LCD 720 HD

  5. #5
    Senior Member
    Join Date
    Mar 2008
    Posts
    799
    Thanks
    66
    Thanked
    71 times in 70 posts
    • kmac's system
      • Motherboard:
      • Gigabyte GA-P55-US3L
      • CPU:
      • Intel Core i5 750
      • Memory:
      • 2GB Corsair DDR3
      • Storage:
      • 2 Samsung F3 500GB each
      • Graphics card(s):
      • ATI HD4770
      • PSU:
      • Enermax Modu 82+ 525W
      • Case:
      • Lain -Li PC-7FN Black
      • Operating System:
      • Windows 7 Prof 64 Bit
      • Monitor(s):
      • Dell U2412M

    Re: Opening samsung q70 case for RAM upgrade

    Found this which is a step by step guide to taking it apart

    http://blog.screenaid.com/2010/01/14...mble-tutorial/

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Building A Gaming Rig - A Living Document. (A HEXUS Project)
    By Stewart in forum PC Hardware and Components
    Replies: 188
    Last Post: 06-09-2008, 04:19 PM
  2. Give muggers a shock with a cellphone stun-gun
    By Bob Crabtree in forum HEXUS News
    Replies: 13
    Last Post: 05-07-2006, 11:02 PM
  3. TomTom 5 on PDA?
    By Mike Fishcake in forum Smartphones and Tablets
    Replies: 25
    Last Post: 05-07-2006, 11:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •