I got 11,000 with an E6600 @ 3GHz and a GTS.... must try harder
I got 11,000 with an E6600 @ 3GHz and a GTS.... must try harder
holy cow, 11000 3d06 marks with a GTS - that must be well overclocked, as i hear that most gtx's barely hit 11500.
Intel q6600 3.6ghz
Asus P5K-Deluxe WiFi
4Gb OCZ ReaperX at 1000Mhz
768Mb BFG 8800GTX
2xWD1001FALS in RAID0
Dtek Fuzion / 2xPA120.2 / DDC01Ultra+PetrasTech top / EK 8800GTX FC Block
Audigy 2ZS
Thermaltake Mozart TX
ahh im not oc btw not yet.
My GFX is a BFG factory overclocked from scan but my e6600 is stock. Will overclock soon but not just yet
So what you think of my score with the information i just gave ya now?
EDIT:Also is it better for me to go 1:1 with FSB and Dram even when not overclocking, or keep it as FSB=266 and Ram=800 (according to manufacturer specs)?
Last edited by xAmritx; 16-07-2007 at 01:36 PM.
xAmritx: 11k 3DMark06 is sure not bad Congrats! But imho 3dmark's score is almost only based on graphics card performance, cpu doesnt have so much influence there. If you want to compare you overclocking success, and general cpu/ram speed, try SuperPI. Do a 1M run, see how long it takes.
http://www.xtremesystems.com/pi/
Mainboard: Asus P5K Deluxe WiFi, Bios 0501 CPU: Intel Core 2 Duo E6850 @ 3.3 GHz 8x415 1.35v C1E/PECI
Heatsink: Noctua NH-U12F, Noctua 120mm Fan, AS5 RAM: 2x1GB OCZ Platinum DDR2 @ 1067 MHz 5-5-5-15
PSU: Seasonic SS12-650HT 4x 18A/12v Graphics: Asus GeForce 7950GT 512MB passive cooled with Accelero S1
Case: Antec P182-SE Chrome Edition OS: XP x86
SuperPI 1M: 13.187 sec (@3.92GHz) 3DMark06: 5.564, CPU 2.646 (@3.0GHz)
3dmark06 is very CPU intensive, there is a CPU score as well A CPU overclock can make a large difference to the 3dmark06 scores.
Yeah i know there is a CPU Score in 3DM06, but he didnt post that
Imho things like SuperPI or Everest/Sandra are much better to compare cpu/ram performance, than 3dmark.
Last edited by gLk*zaP; 17-07-2007 at 02:44 PM.
Mainboard: Asus P5K Deluxe WiFi, Bios 0501 CPU: Intel Core 2 Duo E6850 @ 3.3 GHz 8x415 1.35v C1E/PECI
Heatsink: Noctua NH-U12F, Noctua 120mm Fan, AS5 RAM: 2x1GB OCZ Platinum DDR2 @ 1067 MHz 5-5-5-15
PSU: Seasonic SS12-650HT 4x 18A/12v Graphics: Asus GeForce 7950GT 512MB passive cooled with Accelero S1
Case: Antec P182-SE Chrome Edition OS: XP x86
SuperPI 1M: 13.187 sec (@3.92GHz) 3DMark06: 5.564, CPU 2.646 (@3.0GHz)
Can I ask a (possibly) daft question - can this motherboard act as a switch for LAN for another PC?
I've currently got:
I was wondering if it's possible to:Code:PK5 PC --------->100mbit switch<--------second pc (gb lan card) | | \/ 100mbit Router (Internet)
So as to get gb lan between the two PCs, whilst retaining 100mbit LAN down to the router (internet). If it's possible, does the P5K have to be switched on in order for the second PC to get to the internet?Code:second pc -------gblan----->PK5 PC ----->100mbit switch | | \/ 100mbit Router (Internet)
Just a weird thought
dangel (18-07-2007)
0501 looks to be the latest on the FTP site. There may be some beta versions around, but I'm not sure.
Mad-Max (21-07-2007)
Thanks Clunk
OI your orangutan looks weird now
Try http://www.african-safari-journals.c...n-pictures.jpg
Hi all, I've been lurking for a while now. I firstly wanted to thank clunk and you others fora very informative thread(s).
I used to have P5B deluxe, not overclocked as i never got chance, because it was rather problematic. I had 4 of those 'boards die on me, which seemed to be related to the onboard sound. 1st board had the onboard sound and HD bus disappeard after a update. the second board died after a couple of days when l changed the sound drivers, it would no longer post and would sit there with power to fans and hdds but would give no video or start to boot and so it contiued. The 3rd and 4th (after 2months) board crashed during normal use and upon reseting it failed like the 2nd board.
Finally i swapped to this 'board i hope things go a little better, so far all is well though
I've never really overclocked before and i shall with this i was just wondering how well i would do with the tuniq tower for a cpu cooler and if anyone here has any experiance with it?
There are currently 1 users browsing this thread. (0 members and 1 guests)