I've just got a block of routed IP's as follows:
I've got the Linksys WAG54G router, but I don't know how to set it up to use routed IP's.Code:inetnum: 194.247.33.80 - 194.247.33.95 netname: ZET-ADSL-C2F72150 descr: Static routed account allocation descr: Zetnet Services Ltd customer country: GB admin-c: PM133-RIPE tech-c: PM133-RIPE status: ASSIGNED PA mnt-by: ZETNET-MNT changed: pm@zetnet.net 20040224 source: RIPE route: 194.247.32.0/19 descr: ZETNET origin: AS8250 mnt-by: ZETNET-MNT changed: pm@zetnet.net 19970409 source: RIPE
My ADSL connection is as follows:
I've set each PC with the IP's 194.247.33.81->83, and the routers IP to 194.247.33.80 (which was my attempt at getting the ip's to work, I've put it back to the standard 192.168.1.1). The routers internet IP (as it's combined router/adsl modem) is set automatically to a different address, not part of the block.Code:Technical configuration: Authentication: CHAP Modulation: G.dmt (ITU G922.1 Annex A) Encapsulation: PPPoA VC-MUX (PPP over ATM) VPI/VCI: 0/38 Username: xxxxxxxx Password: xxxxxxxx
I've been googling and fiddling with it for hours, and I'll be quite honest - I don't have a clue how to set this up. If anyone knows how to do this it'd make my day!
Thanks,
Bruno


LinkBack URL
About LinkBacks
Reply With Quote

