Page 1 of 5 1234 ... LastLast
Results 1 to 16 of 66

Thread: Bought a house, want to run cat6 cable..

  1. #1
    Sexiest Hexus user? quite possibly Russ's Avatar
    Join Date
    Jul 2003
    Location
    North Norfolk
    Posts
    5,200
    Thanks
    11
    Thanked
    69 times in 44 posts
    • Russ's system
      • Motherboard:
      • Apple Logic Board
      • CPU:
      • Core i5 2.8GHZ 8MB Cache
      • Memory:
      • 2x2GB
      • Storage:
      • 1TB
      • Graphics card(s):
      • ATI 5750
      • Case:
      • iMac
      • Operating System:
      • Mac OS X Snow Leopard
      • Monitor(s):
      • 27" iMac
      • Internet:
      • 2mb(on a good day)

    Bought a house, want to run cat6 cable..

    Hi folks, long time no post..

    I've recently bought a house, it requires what most people would classify as 'some work' (also known as complete refurbishment). Part of what i will be doing is a complete rewire, so i thought, what better time to just run cat6 everywhere i 'think' i will need it. I have some questions though, and i think they've been caused by google rather than answered by it..

    The plan is for Virgin Broadband > 24 port unmanaged switch > faceplates > patch cable to device

    Now the question that google has raised is the wiring standard, do i use 586A or 586B? does it depend on the switch? does it make no difference what i use aslong as its the same at the switch and faceplace end?

    thanks in advance
    Last edited by kalniel; 01-03-2021 at 10:46 AM. Reason: closing old thread
    Gamertag - Russonf (xbox and ps3)

  2. Received thanks from:

    Zak33 (30-05-2018)

  3. #2
    The late but legendary peterb - Onward and Upward peterb's Avatar
    Join Date
    Aug 2005
    Location
    Looking down & checking on swearing
    Posts
    19,378
    Thanks
    2,892
    Thanked
    3,403 times in 2,693 posts

    Re: Bought a house, want to run cat6 cable..

    586B seems to be the most common especially in Europe- but it doesn't really matter as long as you are consistent. IIRC 568A was to retain some compatibility (in the US) with telephone cabling (using 2 of the 8 pairs) but I can't remember the details. Most installations I have come across us the B variant, so I would use that.
    (\__/)
    (='.'=)
    (")_(")

    Been helped or just 'Like' a post? Use the Thanks button!
    My broadband speed - 750 Meganibbles/minute

  4. #3
    Sexiest Hexus user? quite possibly Russ's Avatar
    Join Date
    Jul 2003
    Location
    North Norfolk
    Posts
    5,200
    Thanks
    11
    Thanked
    69 times in 44 posts
    • Russ's system
      • Motherboard:
      • Apple Logic Board
      • CPU:
      • Core i5 2.8GHZ 8MB Cache
      • Memory:
      • 2x2GB
      • Storage:
      • 1TB
      • Graphics card(s):
      • ATI 5750
      • Case:
      • iMac
      • Operating System:
      • Mac OS X Snow Leopard
      • Monitor(s):
      • 27" iMac
      • Internet:
      • 2mb(on a good day)

    Re: Bought a house, want to run cat6 cable..

    Quote Originally Posted by peterb View Post
    586B seems to be the most common especially in Europe- but it doesn't really matter as long as you are consistent. IIRC 568A was to retain some compatibility (in the US) with telephone cabling (using 2 of the 8 pairs) but I cant remember the details. Most installations I have come across us the B variant, so I would use that.
    thanks Peter.
    Gamertag - Russonf (xbox and ps3)

  5. #4
    Senior Member
    Join Date
    Aug 2013
    Location
    North Wales
    Posts
    1,849
    Thanks
    165
    Thanked
    271 times in 202 posts
    • virtuo's system
      • Motherboard:
      • Gigabyte Aorus Master X570
      • CPU:
      • Ryzen 9 5950x
      • Memory:
      • 64Gb G.Skill TridentZ Neo 3600 CL16
      • Storage:
      • Sabrent 2TB PCIE4 NVME + NAS upon NAS upon NAS
      • Graphics card(s):
      • RTX 3090 FE
      • PSU:
      • Corsair HX850 80+ Platinum
      • Case:
      • Fractal Meshify 2 Grey
      • Operating System:
      • RedStar 3, Ubuntu, Win 10
      • Monitor(s):
      • Samsung CRG90 5140x1440 120hz
      • Internet:
      • PlusNet's best, but still poor, attempt

    Re: Bought a house, want to run cat6 cable..

    Second nod to 568B - I recall some router company (Belkin or Linksys or someone like that) a while ago said that some of their models had an issue with 568A causing intermittent dropouts.

    As long as you are consistent though, I have a huge "B" drawn in the top of my toolbox as a reminder.

    If you are doing your electrics at the same time, remember to leave a good gap between the power and data runs, and cross them at right angles if you have to.

  6. #5
    Oh Crumbs.... Biscuit's Avatar
    Join Date
    Feb 2007
    Location
    N. Yorkshire
    Posts
    11,193
    Thanks
    1,394
    Thanked
    1,091 times in 833 posts
    • Biscuit's system
      • Motherboard:
      • MSI B450M Mortar
      • CPU:
      • AMD 2700X (Be Quiet! Dark Rock 3)
      • Memory:
      • 16GB Patriot Viper 2 @ 3466MHz
      • Storage:
      • 500GB WD Black
      • Graphics card(s):
      • Sapphire R9 290X Vapor-X
      • PSU:
      • Seasonic Focus Gold 750W
      • Case:
      • Lian Li PC-V359
      • Operating System:
      • Windows 10 x64
      • Internet:
      • BT Infinity 80/20

    Re: Bought a house, want to run cat6 cable..

    Another nod to 586B. I used to install miles upon miles of this stuff in one of my old jobs as a broadcast systems integrator and we always used 586B.

    Couple of other pointers:
    Get decent quality keystones and a punchdown tool
    When ordering cable, make sure its not CCA (copper clad aluminium)
    Buy as many boxes/reels as runs you want to each location, e.g. if you want to run 2 cables to each location, buy 2 boxes/reels of cable and then pull them straight from the reel/box

  7. #6
    The late but legendary peterb - Onward and Upward peterb's Avatar
    Join Date
    Aug 2005
    Location
    Looking down & checking on swearing
    Posts
    19,378
    Thanks
    2,892
    Thanked
    3,403 times in 2,693 posts

    Re: Bought a house, want to run cat6 cable..

    Quote Originally Posted by Biscuit View Post
    Buy as many boxes/reels as runs you want to each location, e.g. if you want to run 2 cables to each location, buy 2 boxes/reels of cable and then pull them straight from the reel/box
    Within reason! That might hold good for commercial installation where you can:

    a. determine how much cable there is left in the box (using a TDR tool)
    b. be able to use part boxrs on other installations

    and the (costed) time saved is a significant.

    But in a self install domestic installation you don't want two or three part boxes of unknown length left over so the hassles and extra (uncosted) time outweighs the expenditure.

    But as a rule of thumb, I'd run at least two cables to each location. If you have somewhere where you might have several devices needing a network connection, you can either run cable per device (and a couple spare) or have a local switch to distribute one feed to several devices.

    For example my TV, Apple TV, BlueRay and Sat decoder all need an internet connection, but mostly for software updates. Only one device at a time will be doing anything bandwidth intensive so I have a small switch near them - they all go to the switch and one feed goes back to the router.
    (\__/)
    (='.'=)
    (")_(")

    Been helped or just 'Like' a post? Use the Thanks button!
    My broadband speed - 750 Meganibbles/minute

  8. #7
    RIP Peterb ik9000's Avatar
    Join Date
    Nov 2009
    Posts
    7,701
    Thanks
    1,839
    Thanked
    1,434 times in 1,057 posts
    • ik9000's system
      • Motherboard:
      • Asus P7H55-M/USB3
      • CPU:
      • i7-870, Prolimatech Megahalems, 2x Akasa Apache 120mm
      • Memory:
      • 4x4GB Corsair Vengeance 2133 11-11-11-27
      • Storage:
      • 2x256GB Samsung 840-Pro, 1TB Seagate 7200.12, 1TB Seagate ES.2
      • Graphics card(s):
      • Gigabyte GTX 460 1GB SuperOverClocked
      • PSU:
      • NZXT Hale 90 750w
      • Case:
      • BitFenix Survivor + Bitfenix spectre LED fans, LG BluRay R/W optical drive
      • Operating System:
      • Windows 7 Professional
      • Monitor(s):
      • Dell U2414h, U2311h 1920x1080
      • Internet:
      • 200Mb/s Fibre and 4G wifi

    Re: Bought a house, want to run cat6 cable..

    isn't there a min bend radius with cat6 to worry about? (he says finding a way to log-on the thread since he's got a roll of cat6 in the loft he still hasn't installed yet)

  9. #8
    The late but legendary peterb - Onward and Upward peterb's Avatar
    Join Date
    Aug 2005
    Location
    Looking down & checking on swearing
    Posts
    19,378
    Thanks
    2,892
    Thanked
    3,403 times in 2,693 posts

    Re: Bought a house, want to run cat6 cable..

    Yes. Mfrs spec sheet gives details, but typically 50 mm during installation and 25mm when installed. Cat 5e tends to be more forgiving, typically 20mm. So unless you are running very long lengths, in a domestic installation Cat5e will usually be much easier to install and give comparable performance.
    (\__/)
    (='.'=)
    (")_(")

    Been helped or just 'Like' a post? Use the Thanks button!
    My broadband speed - 750 Meganibbles/minute

  10. Received thanks from:

    ik9000 (29-05-2018)

  11. #9
    Oh Crumbs.... Biscuit's Avatar
    Join Date
    Feb 2007
    Location
    N. Yorkshire
    Posts
    11,193
    Thanks
    1,394
    Thanked
    1,091 times in 833 posts
    • Biscuit's system
      • Motherboard:
      • MSI B450M Mortar
      • CPU:
      • AMD 2700X (Be Quiet! Dark Rock 3)
      • Memory:
      • 16GB Patriot Viper 2 @ 3466MHz
      • Storage:
      • 500GB WD Black
      • Graphics card(s):
      • Sapphire R9 290X Vapor-X
      • PSU:
      • Seasonic Focus Gold 750W
      • Case:
      • Lian Li PC-V359
      • Operating System:
      • Windows 10 x64
      • Internet:
      • BT Infinity 80/20

    Re: Bought a house, want to run cat6 cable..

    Quote Originally Posted by peterb View Post
    Within reason! That might hold good for commercial installation where you can:

    a. determine how much cable there is left in the box (using a TDR tool)
    b. be able to use part boxrs on other installations

    and the (costed) time saved is a significant.

    But in a self install domestic installation you don't want two or three part boxes of unknown length left over so the hassles and extra (uncosted) time outweighs the expenditure.

    But as a rule of thumb, I'd run at least two cables to each location. If you have somewhere where you might have several devices needing a network connection, you can either run cable per device (and a couple spare) or have a local switch to distribute one feed to several devices.

    For example my TV, Apple TV, BlueRay and Sat decoder all need an internet connection, but mostly for software updates. Only one device at a time will be doing anything bandwidth intensive so I have a small switch near them - they all go to the switch and one feed goes back to the router.
    You can get different sized boxes/reels

  12. #10
    RIP Peterb ik9000's Avatar
    Join Date
    Nov 2009
    Posts
    7,701
    Thanks
    1,839
    Thanked
    1,434 times in 1,057 posts
    • ik9000's system
      • Motherboard:
      • Asus P7H55-M/USB3
      • CPU:
      • i7-870, Prolimatech Megahalems, 2x Akasa Apache 120mm
      • Memory:
      • 4x4GB Corsair Vengeance 2133 11-11-11-27
      • Storage:
      • 2x256GB Samsung 840-Pro, 1TB Seagate 7200.12, 1TB Seagate ES.2
      • Graphics card(s):
      • Gigabyte GTX 460 1GB SuperOverClocked
      • PSU:
      • NZXT Hale 90 750w
      • Case:
      • BitFenix Survivor + Bitfenix spectre LED fans, LG BluRay R/W optical drive
      • Operating System:
      • Windows 7 Professional
      • Monitor(s):
      • Dell U2414h, U2311h 1920x1080
      • Internet:
      • 200Mb/s Fibre and 4G wifi

    Re: Bought a house, want to run cat6 cable..

    Quote Originally Posted by virtuo View Post
    If you are doing your electrics at the same time, remember to leave a good gap between the power and data runs, and cross them at right angles if you have to.
    How important is this - I mean if you're space limited...

    Is there anything special you should do if it's going beneath a suspended timber ground floor? (rodent guard linings etc?)

  13. #11
    HEXUS.timelord. Zak33's Avatar
    Join Date
    Jul 2003
    Location
    I'm a Jessie
    Posts
    35,176
    Thanks
    3,121
    Thanked
    3,173 times in 1,922 posts
    • Zak33's system
      • Storage:
      • Kingston HyperX SSD, Hitachi 1Tb
      • Graphics card(s):
      • Nvidia 1050
      • PSU:
      • Coolermaster 800w
      • Case:
      • Silverstone Fortress FT01
      • Operating System:
      • Win10
      • Internet:
      • Zen FTC uber speedy

    Re: Bought a house, want to run cat6 cable..

    Russ

    Welcome back my friend

    Quote Originally Posted by Advice Trinity by Knoxville
    "The second you aren't paying attention to the tool you're using, it will take your fingers from you. It does not know sympathy." |
    "If you don't gaffer it, it will gaffer you" | "Belt and braces"

  14. #12
    HEXUS.timelord. Zak33's Avatar
    Join Date
    Jul 2003
    Location
    I'm a Jessie
    Posts
    35,176
    Thanks
    3,121
    Thanked
    3,173 times in 1,922 posts
    • Zak33's system
      • Storage:
      • Kingston HyperX SSD, Hitachi 1Tb
      • Graphics card(s):
      • Nvidia 1050
      • PSU:
      • Coolermaster 800w
      • Case:
      • Silverstone Fortress FT01
      • Operating System:
      • Win10
      • Internet:
      • Zen FTC uber speedy

    Re: Bought a house, want to run cat6 cable..

    Quote Originally Posted by peterb View Post
    Yes. Mfrs spec sheet gives details, but typically 50 mm during installation and 25mm when installed. Cat 5e tends to be more forgiving, typically 20mm. So unless you are running very long lengths, in a domestic installation Cat5e will usually be much easier to install and give comparable performance.
    I've been working on this and the long bend radius is a royal pain in the ....bottom

    Stick with CAT5E if it's going round skirting, under tight spots etc. A long turn radius is impossible!

    Quote Originally Posted by Advice Trinity by Knoxville
    "The second you aren't paying attention to the tool you're using, it will take your fingers from you. It does not know sympathy." |
    "If you don't gaffer it, it will gaffer you" | "Belt and braces"

  15. Received thanks from:

    ik9000 (30-05-2018)

  16. #13
    The late but legendary peterb - Onward and Upward peterb's Avatar
    Join Date
    Aug 2005
    Location
    Looking down & checking on swearing
    Posts
    19,378
    Thanks
    2,892
    Thanked
    3,403 times in 2,693 posts

    Re: Bought a house, want to run cat6 cable..

    Quote Originally Posted by ik9000 View Post
    How important is this - I mean if you're space limited...

    Is there anything special you should do if it's going beneath a suspended timber ground floor? (rodent guard linings etc?)
    Depending on the age of the building, but there should be rodent guards over ventilation bricks etc. If its really a problem, you could put the cable in plastic conduit, if its a significany problem use steel conduit or SWA cable - or better still, get a pest control company in and eliminate the problem completely!

    Crossing at right angles is good practice, but unless the mains cable is carrying a large current >100A, and/or powering heavy duty electric motors, the risk of interference is minimal. You should not run data cables in the same duct space as mains cable though - you can get multi part ducting, one section for power cables, one for data. This is as much to avoid confusion rather than for interference reduction and isn't likely to be necessary domestically. There is an example here:

    https://www.tlc-direct.co.uk/Product...waAlFkEALw_wcB

    This is an example of three part ducting - mains goes in the centre section, data goes in the top and/or bottom. This sort of installation is quite common in industrial/office situations (I'm not suggesting you use it at home!) but the separation distance is only a few inches, and so I don't think interference is a significant problem in domestic environments.
    (\__/)
    (='.'=)
    (")_(")

    Been helped or just 'Like' a post? Use the Thanks button!
    My broadband speed - 750 Meganibbles/minute

  17. Received thanks from:

    ik9000 (31-05-2018),Zak33 (30-05-2018)

  18. #14
    HEXUS.timelord. Zak33's Avatar
    Join Date
    Jul 2003
    Location
    I'm a Jessie
    Posts
    35,176
    Thanks
    3,121
    Thanked
    3,173 times in 1,922 posts
    • Zak33's system
      • Storage:
      • Kingston HyperX SSD, Hitachi 1Tb
      • Graphics card(s):
      • Nvidia 1050
      • PSU:
      • Coolermaster 800w
      • Case:
      • Silverstone Fortress FT01
      • Operating System:
      • Win10
      • Internet:
      • Zen FTC uber speedy

    Re: Bought a house, want to run cat6 cable..

    peterb comes up with the good again

    Quote Originally Posted by Advice Trinity by Knoxville
    "The second you aren't paying attention to the tool you're using, it will take your fingers from you. It does not know sympathy." |
    "If you don't gaffer it, it will gaffer you" | "Belt and braces"

  19. Received thanks from:

    peterb (30-05-2018)

  20. #15
    Technojunkie
    Join Date
    May 2004
    Location
    Up North
    Posts
    2,580
    Thanks
    239
    Thanked
    213 times in 138 posts

    Re: Bought a house, want to run cat6 cable..

    I did my house with cat5 a decade ago, but if I was doing it today I would put some fiber in as well (at least alongside long runs )
    Chrome & Firefox addons for BBC News
    Follow me @twitter

  21. #16
    The late but legendary peterb - Onward and Upward peterb's Avatar
    Join Date
    Aug 2005
    Location
    Looking down & checking on swearing
    Posts
    19,378
    Thanks
    2,892
    Thanked
    3,403 times in 2,693 posts

    Re: Bought a house, want to run cat6 cable..

    Quote Originally Posted by mikerr View Post
    I did my house with cat5 a decade ago, but if I was doing it today I would put some fiber in as well (at least alongside long runs )
    Fibre has its place, but unless you are looking at very long runs, it probably isn't worth it domestically - cat 6 will do 10 Gb/s over (IIRC) 44 metres or so (provided it is installed and terminated correctly) so can be used for aggregated feeds. Fibre might be a bit easier to install than cat 6a (still sensitive to bend radius) but terminating can be difficult, as can fault finding if it isn't performing as expected. Fibre is good at lower data rates over long runs (> 250m).

    The other advantage is that a fibre cable may have multiple pairs so with suitable (expensive) terminating equipment, you could have a 10,20, or 30 GB/s link - or split the traffic between two or more pairs (or ove a single fibre using multiplexing) but that is overkill for 99.99% of domestic environment.

    If you need that sort of bandwidth, you will have fibre already!

    (But if you want fibre - PM me )
    Last edited by peterb; 08-06-2018 at 10:32 AM. Reason: Correction
    (\__/)
    (='.'=)
    (")_(")

    Been helped or just 'Like' a post? Use the Thanks button!
    My broadband speed - 750 Meganibbles/minute

Page 1 of 5 1234 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •