I think the new Firmware has done it!

**Zak33** · 03-08-2006, 09:36 PM

Still online

at 3.5 SNR Margin.

I think that Draytek UK2 firmware might have nailed it for me

Oh I hope so.....I do hope so....

Wont hold out too much hope yet......just a bit.....

**Zak33** · 03-08-2006, 09:38 PM

just occured to me to add:

Wahts also worth noting is the connection speed that I got this morning at about 9am is quite fast...and it's holding stable on that connection speed.

oh I pray this is the kiddy....

**Zak33** · 03-08-2006, 09:48 PM

What IF the issue has been solved by Draytek with a stronger UPSTREAM signal?

Reason I ask is this:

Previous telnet command I used was adsl status and I got back

adsl status
--------------------------- ATU-R Info (annex A) ---------------------------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 6368000 bps US Actual Rate : 448000 bp
DS maximum Rate : 7456000 bps US maximum Rate : 768000 bp
DS Path Mode : Interleave US Path Mode : Interleave
NE Current Attenuation : 42.5 dB Cur SNR Margin : 6.5 dB
DS actual PSDM(C) : 00000007 US actual PSDM(R) : 00003e77
ADSL Firmware Version : 41e2be2c
-------------------------------- ATU-C Info --------------------------------
Far Current Attenuation : 30.0 dB Far SNR Margin : 15.0 dB
CO ITU Version[0] : 000f414c CO ITU Version[1] : 43420000
DSLAM CHIPSET VENDOR : < Alcatel >
----------------------------------------------------------------------------
INTL, DSTREAM bytes/depth= 16, symbols/codewords = 0, latency= 0*0.25ms
, USTREAM bytes/depth= 2, symbols/codewords = 0, latency= 0*0.25ms
CODE, DSTREAM fast parity bytes= 0, fast codeword= 0.
DSTREAM intl parity bytes= 14, intl codeword= 214.
CODE, USTREAM fast parity bytes= 0, fast codeword= 0.
USTREAM intl parity bytes= 16, intl codeword= 136.
Setting>>
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.
Running>>
FDQ : In Use, TCM : Off, EC : Off.
DS : Framing Mode 3, US : Framing Mode 3.
ADI ADSL Firmware Version: 41e2be2c
adsl status

but NOW I get

> adsl status
--------------------------- ATU-R Info (annex A) ----------------------------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 4768000 bps US Actual Rate : 448000 bps
DS maximum Rate : 5216000 bps US maximum Rate : 1024000 bps
DS Path Mode : Interleave US Path Mode : Interleave
NE Current Attenuation : 41.5 dB Cur SNR Margin : 3.0 dB
DS actual PSDM(C) : 00000007 US actual PSDM(R) : 00003e77
ADSL Firmware Version : 43e2eaa1
-------------------------------- ATU-C Info ---------------------------------
Far Current Attenuation : 30.0 dB Far SNR Margin : 23.0 dB
CO ITU Version[0] : 000f414c CO ITU Version[1] : 43420000
DSLAM CHIPSET VENDOR : < Alcatel >
-----------------------------------------------------------------------------
INTL, DSTREAM bytes/depth= 16, symbols/codewords = 0, latency= 0*0.25ms.
, USTREAM bytes/depth= 2, symbols/codewords = 0, latency= 0*0.25ms.
CODE, DSTREAM fast parity bytes= 0, fast codeword= 0.
DSTREAM intl parity bytes= 14, intl codeword= 164.
CODE, USTREAM fast parity bytes= 0, fast codeword= 0.
USTREAM intl parity bytes= 16, intl codeword= 136.
Setting>>
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.
Running>>
FDQ : In Use, TCM : Off, EC : Off.
DS : Framing Mode 3, US : Framing Mode 3.
ADI ADSL Firmware Version: 43e2eaa1
>

Now....to me that seems like my Router is pushing out a much stronger signal........

what you think?

Have I uncovered a secret?

**ExceededGoku** · 03-08-2006, 09:52 PM

er.. since no one else has posted I will just say "I don't know" just so you aren't the only guy talking

. To be honest I have no idea what was wrong in the first case

**Zak33** · 03-08-2006, 10:01 PM

lol...well dont fret...it didn't solve it...

still disconnected and reconnected 5 minutes ago.....

**Zak33** · 03-08-2006, 10:01 PM

though it was very kind of you to join in.....

thanks!

**Zak33** · 03-08-2006, 10:04 PM

result....

adsl status
--------------------------- ATU-R Info (annex A) ---------------------------
Running Mode : G.DMT State : SHOWTIME
DS Actual Rate : 6368000 bps US Actual Rate : 448000 bp
DS maximum Rate : 7456000 bps US maximum Rate : 768000 bp
DS Path Mode : Interleave US Path Mode : Interleave
NE Current Attenuation : 42.5 dB Cur SNR Margin : 6.5 dB
DS actual PSDM(C) : 00000007 US actual PSDM(R) : 00003e77
ADSL Firmware Version : 41e2be2c
-------------------------------- ATU-C Info --------------------------------
Far Current Attenuation : 30.0 dB Far SNR Margin : 15.0 dB
CO ITU Version[0] : 000f414c CO ITU Version[1] : 43420000
DSLAM CHIPSET VENDOR : < Alcatel >
----------------------------------------------------------------------------
INTL, DSTREAM bytes/depth= 16, symbols/codewords = 0, latency= 0*0.25ms
, USTREAM bytes/depth= 2, symbols/codewords = 0, latency= 0*0.25ms
CODE, DSTREAM fast parity bytes= 0, fast codeword= 0.
DSTREAM intl parity bytes= 14, intl codeword= 214.
CODE, USTREAM fast parity bytes= 0, fast codeword= 0.
USTREAM intl parity bytes= 16, intl codeword= 136.
Setting>>
FDQ : Enable, TCM : Enable, EC : Disable, Framing Mode : 3.
Running>>
FDQ : In Use, TCM : Off, EC : Off.
DS : Framing Mode 3, US : Framing Mode 3.
ADI ADSL Firmware Version: 41e2be2c
adsl status

lower downstream and upstream and a better SNR ratio to suit this noise level...

which is what I want EVERYTIME I log on...not just at the critical moment at night.

**Zak33** · 04-08-2006, 12:06 AM

dropped further still and lost connection again at midnight....

pants

**jamin** · 04-08-2006, 12:18 AM

Ah man! I was gonna post "Yay, nice one mate!"

But I guess its back to the drawing board.

The increase in far end SNR is good news.

As this is only happening at night am wondering if this is a contention issue on the DSLAM in the exchange. Could it be dropping out under excessive load???

**Agent** · 04-08-2006, 12:23 AM

Originally Posted by jamin

As this is only happening at night am wondering if this is a contention issue on the DSLAM in the exchange. Could it be dropping out under excessive load???

Could well be.
Even if this firmware had fixed it - you have an issue that needs sorting anyway

http://usertools.plus.net/exchanges/
Put your postcode / exchange place in there - see what colour it gives you

**Zak33** · 04-08-2006, 08:34 AM

Well I left it on last night, over night, as it had synced at a lower speed just after midnight, and having done that, this morning the SNR margin is 11.5

So from where I'm say, my area just gets busy late at night on the telephones.

Least I have the screenies to show the BT dude when he/she arrives.

Cheers guys, I'll leave it one now 24/7 and see what occurs. Got people coming round tonight for IL-2 so i NEED stable!

**Tumble** · 04-08-2006, 10:47 AM

Originally Posted by Zak33

Got people coming round tonight for IL-2 so i NEED stable!

Goodee

I have filed a flight plan and have clearance for unlimited Ruhbarbs from 20:30

**badass** · 04-08-2006, 05:20 PM

Originally Posted by Zak33

3.5 SNR Margin.

If you ever see a margin like that you are running too fast for your line

Less than 10 usually spells trouble.

**Zak33** · 05-08-2006, 12:39 AM

agreed

**jamin** · 05-08-2006, 12:42 AM

Whats the latest mate? You still online?

**LWA** · 05-08-2006, 03:54 PM

Zak, been reading your threads about the connection dropouts and I was very pleased for you when I saw this one! That was until I got a few posts down and saw that the issue was still there.

Sorry I can't offer any useful suggestions, just wanted to wish you the best of luck.

Thread: I think the new Firmware has done it!

LinkBack

Thread Tools

I think the new Firmware has done it!

Thread Information

Users Browsing this Thread

Similar Threads

Creative Zen Vision:M firmware problem

Daytek Vigor 2800 Series firmware version 2.7 released

Draytek Vigor 2800G - new firmware 2.6.3.1 released

Xbox360: Hacked!

DG814 Important Firmware ISSUE (4.8 - DONT)

Posting Permissions