Results 1 to 5 of 5

Thread: 533MHz DDR2 RAM 4-4-4-11 required

  1. #1
    Senior Member
    Join Date
    Nov 2006
    Posts
    569
    Thanks
    33
    Thanked
    16 times in 13 posts
    • Gibbo's system
      • Motherboard:
      • Asus P5QL-E
      • CPU:
      • Q9550 4x2.833GHz with Noctua NHU12 cooler
      • Memory:
      • Corsair 2x2Gb TwinX DDR2 XMS2, PC2-8500 (1066)
      • Storage:
      • 2 x 250GB SATA 1 x 120GB PATA 1 x 80GB PATA
      • Graphics card(s):
      • Palit 9800GT 512Mb - - Soundcard: RME HDSP9632
      • PSU:
      • Tagan BZ700
      • Case:
      • Antec TX1050
      • Operating System:
      • XP Pro Sp3
      • Monitor(s):
      • Iiyama PLE2200WSB
      • Internet:
      • Orange [:eek:] 8meg running @ 5288kbps last time I tested it http://www.speedtest.net

    533MHz DDR2 RAM 4-4-4-11 required

    As I failed to find a UK source of Samsung RAM (ideally 2 x 512Mb 240pin DDR2) I am wondering if anyone knows where I can get some 533MHz DDR2 4-4-4-11 RAM to match what I already have?
    Asus P5QL-E : Intel Q9550 : Noctua NH-U12P : DDR2 2 x 2048MB 1066 Corsair : Palit 9800GT 512Mb : Iiyama PLE2200WS-B : RME HDSP9632[a proper musician's card] : 2 x SATA 7200rpm 250GB : 1 x 7200rpm IDE 120GB : 1 x 7200rpm IDE 80GB : Iomega 34290 1TB eSATA storage : Pioneer DVR-216DBK : Antec TX1050 case : TAGAN TG700BZ PSU : MOTU MTPAV MIDI interface/time clock : Behringer BCR2000 : SONAR 7PE : Reason3 : ReFX Nexus : ReFX Vanguard : NI Battery3 : JP-8080 : D-50 : D-10

  2. #2
    Senior Member kalniel's Avatar
    Join Date
    Aug 2005
    Posts
    29,173
    Thanks
    1,515
    Thanked
    2,930 times in 2,374 posts
    • kalniel's system
      • Motherboard:
      • Gigabyte X58A UD3R rev 2
      • CPU:
      • Intel Xeon X5680
      • Memory:
      • 12gb DDR3 2000
      • Graphics card(s):
      • nVidia GTX 1060 6GB
      • PSU:
      • Seasonic 600W
      • Case:
      • Cooler Master HAF 912
      • Operating System:
      • Win 10 Pro x64
      • Monitor(s):
      • Dell U2311H
      • Internet:
      • O2 8mbps
    PC world routinely stock 553 4-4-4-12, so just set the timing on both sets to 12 and you're sorted.

    eg: http://www.pcworld.co.uk/martprd/product/seo/790236

    (it doesn't say 4-4-4-12 on the website, but it is).

    Scan's stuff is even cheaper at the moment:
    http://www.scan.co.uk/Products/Produ...oductID=121624
    Last edited by kalniel; 13-03-2007 at 04:39 PM.

  3. #3
    Senior Member
    Join Date
    Nov 2006
    Posts
    569
    Thanks
    33
    Thanked
    16 times in 13 posts
    • Gibbo's system
      • Motherboard:
      • Asus P5QL-E
      • CPU:
      • Q9550 4x2.833GHz with Noctua NHU12 cooler
      • Memory:
      • Corsair 2x2Gb TwinX DDR2 XMS2, PC2-8500 (1066)
      • Storage:
      • 2 x 250GB SATA 1 x 120GB PATA 1 x 80GB PATA
      • Graphics card(s):
      • Palit 9800GT 512Mb - - Soundcard: RME HDSP9632
      • PSU:
      • Tagan BZ700
      • Case:
      • Antec TX1050
      • Operating System:
      • XP Pro Sp3
      • Monitor(s):
      • Iiyama PLE2200WSB
      • Internet:
      • Orange [:eek:] 8meg running @ 5288kbps last time I tested it http://www.speedtest.net
    Ta

    How does one 'reset the timing' ?
    Asus P5QL-E : Intel Q9550 : Noctua NH-U12P : DDR2 2 x 2048MB 1066 Corsair : Palit 9800GT 512Mb : Iiyama PLE2200WS-B : RME HDSP9632[a proper musician's card] : 2 x SATA 7200rpm 250GB : 1 x 7200rpm IDE 120GB : 1 x 7200rpm IDE 80GB : Iomega 34290 1TB eSATA storage : Pioneer DVR-216DBK : Antec TX1050 case : TAGAN TG700BZ PSU : MOTU MTPAV MIDI interface/time clock : Behringer BCR2000 : SONAR 7PE : Reason3 : ReFX Nexus : ReFX Vanguard : NI Battery3 : JP-8080 : D-50 : D-10

  4. #4
    Senior Member kalniel's Avatar
    Join Date
    Aug 2005
    Posts
    29,173
    Thanks
    1,515
    Thanked
    2,930 times in 2,374 posts
    • kalniel's system
      • Motherboard:
      • Gigabyte X58A UD3R rev 2
      • CPU:
      • Intel Xeon X5680
      • Memory:
      • 12gb DDR3 2000
      • Graphics card(s):
      • nVidia GTX 1060 6GB
      • PSU:
      • Seasonic 600W
      • Case:
      • Cooler Master HAF 912
      • Operating System:
      • Win 10 Pro x64
      • Monitor(s):
      • Dell U2311H
      • Internet:
      • O2 8mbps
    It should be in your BIOS manual, usually there is an advanced CPU/chipset section which allows you to select timings and you'd change the tRAS from AUTO to 12. Perhaps someone with the same board can help you with specifics.

  5. #5
    Senior Member
    Join Date
    Nov 2006
    Posts
    569
    Thanks
    33
    Thanked
    16 times in 13 posts
    • Gibbo's system
      • Motherboard:
      • Asus P5QL-E
      • CPU:
      • Q9550 4x2.833GHz with Noctua NHU12 cooler
      • Memory:
      • Corsair 2x2Gb TwinX DDR2 XMS2, PC2-8500 (1066)
      • Storage:
      • 2 x 250GB SATA 1 x 120GB PATA 1 x 80GB PATA
      • Graphics card(s):
      • Palit 9800GT 512Mb - - Soundcard: RME HDSP9632
      • PSU:
      • Tagan BZ700
      • Case:
      • Antec TX1050
      • Operating System:
      • XP Pro Sp3
      • Monitor(s):
      • Iiyama PLE2200WSB
      • Internet:
      • Orange [:eek:] 8meg running @ 5288kbps last time I tested it http://www.speedtest.net
    Quote Originally Posted by kalniel View Post
    It should be in your BIOS manual, usually there is an advanced CPU/chipset section which allows you to select timings and you'd change the tRAS from AUTO to 12. Perhaps someone with the same board can help you with specifics.
    Found it page 4-26 BIOS/Advanced/Chipset/Confirure DRAM Timing by SPD



    Asus P5QL-E : Intel Q9550 : Noctua NH-U12P : DDR2 2 x 2048MB 1066 Corsair : Palit 9800GT 512Mb : Iiyama PLE2200WS-B : RME HDSP9632[a proper musician's card] : 2 x SATA 7200rpm 250GB : 1 x 7200rpm IDE 120GB : 1 x 7200rpm IDE 80GB : Iomega 34290 1TB eSATA storage : Pioneer DVR-216DBK : Antec TX1050 case : TAGAN TG700BZ PSU : MOTU MTPAV MIDI interface/time clock : Behringer BCR2000 : SONAR 7PE : Reason3 : ReFX Nexus : ReFX Vanguard : NI Battery3 : JP-8080 : D-50 : D-10

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Safe overclock voltage for DDR2 ram?
    By arthurleung in forum PC Hardware and Components
    Replies: 0
    Last Post: 22-05-2006, 11:06 PM
  2. Removing RAM to install in another PC
    By MEW71 in forum Software
    Replies: 2
    Last Post: 02-04-2006, 01:42 PM
  3. What should I do about my RAM?
    By spindle in forum PC Hardware and Components
    Replies: 2
    Last Post: 20-03-2004, 02:44 PM
  4. Best Corsair RAM for Asus P4C800-E ?
    By solrak in forum PC Hardware and Components
    Replies: 28
    Last Post: 19-08-2003, 12:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •