Results 1 to 10 of 10

Thread: AC Freezer 7 Pro

  1. #1
    Senior Member
    Join Date
    Feb 2007
    Location
    Reading
    Posts
    323
    Thanks
    10
    Thanked
    11 times in 11 posts
    • derchris's system
      • Motherboard:
      • Asus Rampage II Extreme
      • CPU:
      • Intel Core i7 920@3.4 GHz
      • Memory:
      • Corsair Dominator 6x2GB DDR3
      • Storage:
      • 2x Crucial 80GB SDD Raid0 + 2TB data HDD, 12TB NAS
      • Graphics card(s):
      • 2x HD5970
      • PSU:
      • Corsair HX750W
      • Case:
      • Antec P182
      • Operating System:
      • Windows 7 Ultimate SP1 x64
      • Monitor(s):
      • 2x 28" HansG, 1x 27" Dell
      • Internet:
      • Be.Unlimited 24MBit

    AC Freezer 7 Pro

    I got mine today,
    and I read the instructions.

    It says "CPU surface must be cleaned. Paste residue is to be removed".
    Thats is ok, but they didn't say anything about applying new Paste on the CPU.

    Should this cooler run without ?

  2. #2
    A. Nother
    Join Date
    Jul 2006
    Location
    home
    Posts
    300
    Thanks
    9
    Thanked
    7 times in 5 posts
    • mallett's system
      • Motherboard:
      • Gigabyte GA-965P-DS3
      • CPU:
      • Intel E6300
      • Memory:
      • 4GB Corsair 800 DHX
      • Storage:
      • 1TB Samy & 2x 250GB Hitatichi RAID 0
      • Graphics card(s):
      • XFX 7600GT XXX
      • PSU:
      • Seasonic S12 - 430W
      • Case:
      • Antec SOLO
      • Operating System:
      • Vista 64bit
      • Monitor(s):
      • Iiyama 19" LCD
    there should be a big lump of paste on the bottom of the cooler (there was on mine) and its ready to put straight onto the cpu.
    you can though remove that on the cooler and add some other paste of your choice

    but all coolers need to have a thermal paste on them to help conduct the heat away from the chip

    hope this helps

  3. #3
    Senior Member
    Join Date
    Feb 2007
    Location
    Reading
    Posts
    323
    Thanks
    10
    Thanked
    11 times in 11 posts
    • derchris's system
      • Motherboard:
      • Asus Rampage II Extreme
      • CPU:
      • Intel Core i7 920@3.4 GHz
      • Memory:
      • Corsair Dominator 6x2GB DDR3
      • Storage:
      • 2x Crucial 80GB SDD Raid0 + 2TB data HDD, 12TB NAS
      • Graphics card(s):
      • 2x HD5970
      • PSU:
      • Corsair HX750W
      • Case:
      • Antec P182
      • Operating System:
      • Windows 7 Ultimate SP1 x64
      • Monitor(s):
      • 2x 28" HansG, 1x 27" Dell
      • Internet:
      • Be.Unlimited 24MBit
    Si, if I clean my CPU, and just use the paste which is on the cooler, then I'm good ?

  4. #4
    A. Nother
    Join Date
    Jul 2006
    Location
    home
    Posts
    300
    Thanks
    9
    Thanked
    7 times in 5 posts
    • mallett's system
      • Motherboard:
      • Gigabyte GA-965P-DS3
      • CPU:
      • Intel E6300
      • Memory:
      • 4GB Corsair 800 DHX
      • Storage:
      • 1TB Samy & 2x 250GB Hitatichi RAID 0
      • Graphics card(s):
      • XFX 7600GT XXX
      • PSU:
      • Seasonic S12 - 430W
      • Case:
      • Antec SOLO
      • Operating System:
      • Vista 64bit
      • Monitor(s):
      • Iiyama 19" LCD
    yeah that should be all you need, it seems to be pretty good stuff as its done me fine all this time

  5. #5
    Senior Member
    Join Date
    Feb 2007
    Location
    Reading
    Posts
    323
    Thanks
    10
    Thanked
    11 times in 11 posts
    • derchris's system
      • Motherboard:
      • Asus Rampage II Extreme
      • CPU:
      • Intel Core i7 920@3.4 GHz
      • Memory:
      • Corsair Dominator 6x2GB DDR3
      • Storage:
      • 2x Crucial 80GB SDD Raid0 + 2TB data HDD, 12TB NAS
      • Graphics card(s):
      • 2x HD5970
      • PSU:
      • Corsair HX750W
      • Case:
      • Antec P182
      • Operating System:
      • Windows 7 Ultimate SP1 x64
      • Monitor(s):
      • 2x 28" HansG, 1x 27" Dell
      • Internet:
      • Be.Unlimited 24MBit
    Hehe,

    the cooler doesn't fit on the Mobo.

    I have the Asus Striker Extreme, with the passive cooled chipset.
    The cooler alone fit, but if I want to add the fan, no space avail.

    ATM I'm cutting away some of the fans borders.
    Hopefully then it will fit.

  6. #6
    Senior Member
    Join Date
    Feb 2007
    Location
    Reading
    Posts
    323
    Thanks
    10
    Thanked
    11 times in 11 posts
    • derchris's system
      • Motherboard:
      • Asus Rampage II Extreme
      • CPU:
      • Intel Core i7 920@3.4 GHz
      • Memory:
      • Corsair Dominator 6x2GB DDR3
      • Storage:
      • 2x Crucial 80GB SDD Raid0 + 2TB data HDD, 12TB NAS
      • Graphics card(s):
      • 2x HD5970
      • PSU:
      • Corsair HX750W
      • Case:
      • Antec P182
      • Operating System:
      • Windows 7 Ultimate SP1 x64
      • Monitor(s):
      • 2x 28" HansG, 1x 27" Dell
      • Internet:
      • Be.Unlimited 24MBit
    Mission successful.

    Lets see how good it can cool down my CPU

  7. #7
    Late Night Ninja! CrazyMonkey's Avatar
    Join Date
    Oct 2006
    Location
    Bristol
    Posts
    1,510
    Thanks
    29
    Thanked
    44 times in 43 posts
    • CrazyMonkey's system
      • Motherboard:
      • Asus M4N98TD Evo
      • CPU:
      • Phenom II X6 1055T @ 4.1ghz
      • Memory:
      • 8GB DDR3 Dominator @ 1700mhz
      • Storage:
      • 120GB OCZ Vertex 2E - 1TB Hitatchi
      • Graphics card(s):
      • 2x 460 1GB
      • PSU:
      • 850W
      • Case:
      • Silverstone Fortress FT02R-WRI Ltd.Edition
      • Operating System:
      • Win 7, XP, Server2008 RC1, Gentoo
      • Monitor(s):
      • 24" Acer LED - 22" Belinea - 19" Samsung - 19" IIyama
      • Internet:
      • 50 MB Virgin Media Cable
    Wack it on the board, the paste on it is good and apparently works better than AS5 on it although with AS5 on mine is dropped it a further 3 degrees.

  8. #8
    Ask me stuff
    Join Date
    Feb 2007
    Posts
    768
    Thanks
    8
    Thanked
    1 time in 1 post
    • DecomposingStar's system
      • Motherboard:
      • Asus P5K Premium Wifi
      • CPU:
      • E6400 C2D Intel @ OC'd to 2.91ghz
      • Memory:
      • 4x 1GB OCZ Platinum Edition (800mhz - 4/4/12) (32bit Vista runs it at 3.3gb)
      • Storage:
      • 1 Maxtor DiamondMax 80gb HDD, 1x Western Caviar 250gb HDD
      • Graphics card(s):
      • ATI 2900XT HIS Oc'd 810/899
      • PSU:
      • 670W HiperPower
      • Case:
      • Antec 900 - Customised.
      • Monitor(s):
      • Hanns.G 19" HW191D
      • Internet:
      • 2mb NTL/Virgin
    Yeah as long as its got paste on the cooler you'll be fine. Its good paste too!

  9. #9
    Senior Member
    Join Date
    Feb 2007
    Location
    Reading
    Posts
    323
    Thanks
    10
    Thanked
    11 times in 11 posts
    • derchris's system
      • Motherboard:
      • Asus Rampage II Extreme
      • CPU:
      • Intel Core i7 920@3.4 GHz
      • Memory:
      • Corsair Dominator 6x2GB DDR3
      • Storage:
      • 2x Crucial 80GB SDD Raid0 + 2TB data HDD, 12TB NAS
      • Graphics card(s):
      • 2x HD5970
      • PSU:
      • Corsair HX750W
      • Case:
      • Antec P182
      • Operating System:
      • Windows 7 Ultimate SP1 x64
      • Monitor(s):
      • 2x 28" HansG, 1x 27" Dell
      • Internet:
      • Be.Unlimited 24MBit
    With the boxed one, my CPU was at 60, now it is at 45.
    So good deal, but I had to do some minor changes to the fan.
    It was not possible to mount it onto the cooler, as the heatpipes of my mobo are to near to the CPU socket.
    So I had to cut a little away from the corners of the fan to fit it in.
    But now its good, and so quite

  10. #10
    Ask me stuff
    Join Date
    Feb 2007
    Posts
    768
    Thanks
    8
    Thanked
    1 time in 1 post
    • DecomposingStar's system
      • Motherboard:
      • Asus P5K Premium Wifi
      • CPU:
      • E6400 C2D Intel @ OC'd to 2.91ghz
      • Memory:
      • 4x 1GB OCZ Platinum Edition (800mhz - 4/4/12) (32bit Vista runs it at 3.3gb)
      • Storage:
      • 1 Maxtor DiamondMax 80gb HDD, 1x Western Caviar 250gb HDD
      • Graphics card(s):
      • ATI 2900XT HIS Oc'd 810/899
      • PSU:
      • 670W HiperPower
      • Case:
      • Antec 900 - Customised.
      • Monitor(s):
      • Hanns.G 19" HW191D
      • Internet:
      • 2mb NTL/Virgin
    Well you can't exactly blame anyone except the mobo manufacturer for that really, and even they aren't fully to blame.

    Good deal for sub-£15.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Arctic Cooling Freezer 64 Pro Sticky Options?
    By GeorgeTuk in forum SCAN.care@HEXUS
    Replies: 6
    Last Post: 29-03-2007, 02:44 PM
  2. Artic Cooling Freezer 7 Pro
    By billbruen in forum PC Hardware and Components
    Replies: 9
    Last Post: 26-02-2007, 09:46 AM
  3. Freezer 64 Pro to fan controller...
    By NightshadowUK in forum PC Hardware and Components
    Replies: 5
    Last Post: 22-01-2007, 07:30 PM
  4. Arctic Cooling Freezer 7 Pro in Antec2400 Case
    By supersan in forum PC Hardware and Components
    Replies: 9
    Last Post: 25-12-2006, 05:17 PM
  5. Arctic Cooling Freezer 64 Pro stock ?
    By SaracenUK in forum SCAN.care@HEXUS
    Replies: 0
    Last Post: 21-03-2006, 11:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •