when i stop the fan on my ninja, the temperatures only lower by one degree...and its around 45 degrees.
i just want to know why, like if it could be due to me doing a crap job with the thermal paste...
Thanks
Nick
when i stop the fan on my ninja, the temperatures only lower by one degree...and its around 45 degrees.
i just want to know why, like if it could be due to me doing a crap job with the thermal paste...
Thanks
Nick
Is that idle or load?
Are you running the fan at 12v?
its idle, but it doesnt look as if its spinning very fast...
not sure what im running it at...its just plugged into the CPU fan socket...
And what are the load temps with and without the fan?
100% on both cores with fan = 55/52
without fan 55/53...
![]()
i've just re applied the thermal paste...no temperature change at all...
im starting to think its the fan
Those load temps look fine to me. they could probably be a touch lower, but nothing to worry about.
Are those temps with the side of the case off or on? How are the temps with a big desk fan blowing into the case?
Have you tried flipping the fan over?
fan is going the right way, 100% sure about that
case side on
and....no...i havent tried it with a big desk fan...
the fan looks incredibly slow to me though
Have you got "CPU Quite fan" turned on in the BIOS?
if so that's slowing the fan unless it goes over a given tempture.
ether turn it off or lower the target temp.
might have to check that....
thanks![]()
There are currently 1 users browsing this thread. (0 members and 1 guests)