E6600 Overclocking Problems
Hi Guys :D I've been sniffing around these boards while overclocking my machine but not registered until today as I need a bit of help now and was hoping someone would be kind enough to offer some advice:surrender:
You can see my config from the sig, I'm also using the Asus Silent Square Pro which is working wonders at the moment, the problem I'm having is random reboots when my CPU is clocked above stock, I just get a BSD even when not under load and when doing boring things like checking email! I have used Orthos and CPU-Z to check the clock and speedfan + coretemp to check temps. Orthos doesn't like working in blended mode on my machine, it throws up an error and closes at random intervals so I've been running the CPU test instead and after running for 1 hour the highest my temps have spiked is 48 degrees although they usually stick at around 46 for the duration when clocked to 355X9. I'm using the overclocking guide on this site as it's the best I've found so far (Thanks Guys :D) but am still having problems, could anyone help pretty please!!
Please bear in mind that I haven't done any overclocking since the days of jumpers and using a pencil on the L1 bridge so my knowledge is somewhat hazy on the area :confused: